OPERATING MODE SELECTION:
PRESS THE CS KEY
1 SIMULTANEOUS MODE
WHEN THE START BUTTON IS PRESSED, ALL THE ENABLED PREDETERMINERS START TO MEASURE
OUT THE PRODUCT
2 SEQUENTIAL MODE
WHEN THE START BUTTON IS PRESSED, THE FIRST ENABLED PREDETERMINER STARTS, FOLLOWED
BY THE SECOND, AND SO ON
3 INDIVIDUAL MODE
PRESS ONE OF THE F KEYS ON THE LEFT (F1 = PRODUCT 1, F2 = PRODUCT 2...) IN ORDER TO SELECT
THE PRODUCT
PRESS THE START BUTTON IN ORDER TO START THE INDIVIDUAL PRODUCT
USE THE ARROW KEY IN ORDER TO SELECT THE OPERATING MODE
PRESS THE ENTER KEY TO CONFIRM
THE WORD “ON” ALONGSIDE THE OPERATING MODE INDICATES THE PRE-SELECTED MODE
NOTE:
TO START UP THE SIMULTANEOUS OR SEQUENTIAL CYCLE, PRESS START FROM THE MAIN PAGE
TO START UP THE INDIVIDUAL CYCLE, SELECT THE PRODUCT USING ONE OF THE FUNCTION KEYS
(F1, F2...) AND THEN PRESS THE START KEY
SETTING THE DOSAGE QUANTITY:
PRESS ONE OF THE F KEYS ON THE LEFT (F1 = PRODUCT 1, F2 = PRODUCT 2...) IN ORDER TO SELECT
THE PRODUCT
SET THE DESIRED QUANTITY (SET)
CONFIRM BY PRESSING THE ENTER KEY
PRESS THE ESC KEY IN ORDER TO RETURN TO THE DOSAGE PAGE
GENERAL NOTES
WHEN THE PRODUCT IS IN THE START PHASE, THE LETTERS PR (PREDETERMINER) FLASH ON THE
LEFT OF THE DISPLAY
IF THE STOP BUTTON IS PRESSED IN ORDER TO INTERRUPT THE DOSAGE, THE LETTER SAPPEARS
NEXT TO THE PRODUCTS THAT WERE IN THE START PHASE
WHEN A PREDETERMINER HAS REACHED THE END OF THE DOSAGE OPERATION, AN ASTERISK
LIGHTS UP ALONGSIDE THE LETTERS PR
IT IS NOT POSSIBLE TO MODIFY THE SETTINGS OR PARAMETERS DURING THE DOSAGE CYCLE
THE PRESENCE OF THE LITRE COUNTER IMPULSES IS INDICATED BY THE IN LED FLASHING
2
