Coolmaster CM3000 User manual
OWNER’S MANUAL
PORTABLE REFRIGERATED
AIR CONDITIONER
CM3000
(ENGLISH) (CM3000)
CM3000
|i
Waste electrical products must not be disposed of with household waste.
This product should be taken to your local recycling centre for safe treatment.
CONTENTS
Introduction ....................................................1
Safety ............................................................ 2
Component Location ..................................... 3
Installation ..................................................... 4
Control and Display ....................................... 5
Remote Control ............................................. 6
Operation ...................................................... 7
Maintenance ..................................................9
Troubleshooting..............................................10
Speci!cation .................................................. 11
Warranty......................................................... 12
OWNER’S MANUAL |1
THANK YOU for choosing a Coolmaster
air conditioner. This appliance has been
carefully engineered to bring you trouble-
free personal air conditioning. Please
read this manual carefully so that you can
take full advantage of the many bene•ts
your Coolmaster provides.
This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have supervision or been
given instruction in using the appliance by
a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the appliance.
Do not place anything through the
ventilating slots.
Be sure the appliance has been securely
and correctly installed according to the
installation instructions contained within
this manual.
Personal Cooling
Your Coolmaster refrigerated air
conditioner is a portable unit that supplies
cool air to a personal area within a room.
It is not intended to function as a house or
room air conditioner.
Energy Saving Tips
• Do not locate the air conditioner where
furniture or other objects can obstruct
the air flow.
• Keep curtains and blinds closed during
the hottest part of the day.
• Keep the filters clean.
• Set the air conditioner to maximum
cooling and high fan speed initially,
then adjust to a comfortable setting.
• Do not wait until the room is
excessively hot before using the air
conditioner.
Warranty
Coolmaster air conditioners are warranted
against faulty manufacture for 2 years
after purchase. Please refer to page 12
for more details on warranty.
INTRODUCTION
CM3000
|
2
General Safety
This air conditioner is for indoor use only.
Transport the air conditioner in an upright
position only, or leave it in an upright
position for at least 2 hours before use.
Use only in the upright position on a •at
level surface (Fig. 1) and at least 30 cm
from any objects.
Do not place objects on the air
conditioner, or through the ventilating
slots or restrict the air inlets & outlets
(Fig. 2).
Closely supervise any children and pets
when the air conditioner is in use.
Do not store or operate the appliance
near any •ammable substances.
During operation, water will collect in the
bottom tank of the air conditioner. Be
careful when moving the unit to prevent
water from spilling.
Electrical Safety
Ensure the appliance has been installed
in accordance with national wiring
regulations.
Electrical Safety (cont.)
Caution! Before connecting the electrical
power cord to a power outlet, check that
the air conditioner voltage as shown on
the rating label on the air conditioner is
the same as your power supply. Ensure
the power supply is correctly earthed and
rated.
Plug the air conditioner directly into a
properly installed power outlet. Never
use an extension cord, double adaptor
or multi-power outlet board to run this air
conditioner.
Do not pull the air conditioner along by
the power cord or place the power cord
near a source of heat. Always unroll the
power cord completely before use.
If the power supply cord is damaged it
must be replaced by the manufacturer,
a service agent or similarly quali"ed
persons in order to avoid a hazard.
Switch off and unplug when not in use.
Do not use in humid environments such
as bathrooms, laundries or other steamy
or wet areas.
Do not touch or operate the air
conditioner with wet or damp hands or
when standing barefoot.
SAFETY
1
2
OWNER’S MANUAL |3
Parts List
1. Control panel
2. Horizontal air vanes
3. Vertical air vane control
4. Enclosure
5. Handles
6. Air •lter (behind grille)
7. Upper air intake grille
8. Exhaust outlet
9. Cord storage strap
10. Lower air intake grille
11. Tank drain outlet
12. Castors
13. Drain outlet
14. Exhaust hose and plug
15. Window kit
16. Window kit plug
17. Hose end connector window side
18. Hose end connector unit side
19. Exhaust cover
20. Fixing screws
21. Foam sealant
22. Drain pipe
23. Remote control
1
7
13
18
10
15
20
21
11
14
19
12
17
5
8
6
4
23
COMPONENT LOCATION
3
4
23
22
16
9
CM3000
|4
Step 3: (Optional) Cut the Foam seal to
the length of your window and attach it
to the window frame. This will help seal
along the Window kit.
Step 4: Open a window and !t the
Window kit. Extend the attachments as
required and lock into place with the
Window kit plug provided. Ensure the
outlet is not obstructed. The Window kit
can be installed horizontally or vertically,
to suit your window type. If necessary the
Window kit can be secured to the window
frame with the Fixing screws provided.
Air conditioner location
Place the air conditioner on a !rm and "at
surface. The minimum distance required
from the operating air conditioner to any
walls or objects is 30 cm (Fig. 5).
Installing the Exhaust Hose
Step 1: Fit the Exhaust hose to the Hose
end connectors by turning the parts in the
direction shown in Figure 6.
Step 2: Slide the Hose end onto the
Exhaust outlet at the rear of the air
conditioner as shown in Figure 7.
INSTALLATION
5
6
7
Step 5: Fit the Exhaust nozzle to the
Window kit, and lock into place. Keep the
Exhaust hose as short and straight as
possible. This will maximise the cooling
performance.
Don’t use extension pieces for the
Exhaust hose as this will reduce
performance and possibly result in
damage to the air conditioner.
Hot air and mist will be emitted outside
through the Exhaust hose. It is critical to
the performance of the unit that all of the
exhaust air is removed from the space
being cooled.
Installing the Drain Hose
For continuous draining of water during
DRY mode operation.
Step 1: Remove the Drain outlet plug at
the rear of the air conditioner (Fig. 4).
Step 2: Connect the Drain hose to the
Drain outlet. Push on !rmly to secure into
place, see Figure 8.
8
Step 3: Run the free end of the Drain
hose to a drain. Make sure that the drain
hose does not rise above the drain outlet
as the water will not "ow otherwise.
OWNER’S MANUAL |5
CONTROL AND DISPLAY
10
Display
See Figure 11.
MODE set button
See Figure 9.
UP button
See Figure 9.
POWER button
See Figure 9.
Air Conditioner Control Panel
Remote Controller
Remote Control Display
MODE select indicator
TIMER ON/OFF
indicators
FAN speed indicator
Temperature and timer
display
LOCK indicator
Indicates that the remote
lock is activated
ON / OFF indicator
Remote transmission
indicator
11
MODE select indicator
Displays the current
operating mode as Cool,
Fan or Dry.
POWER button
Press to turn the air
conditioner on and off.
LED Display
Set temperature and
time display.
MODE set button
Press to cycle between
Cool, Fan and Dry operating
modes.
DOWN button
Press to decrease
the set temperature.
UP button
Press to increase
the set temperature.
SLEEP
RESET button
Press to reset all of the
current settings.
SLEEP button
Press to enter sleep mode.
DOWN button
See Figure 9.
SLEEP
TIMER-ON button
Press to set the time when
before the air conditioner will
automatically startup.
LOCK button
Press to lock remote control from accepting any
button commands. Press again to unlock remote.
TIMER-OFF button
Press to set the time when
before the air conditioner will
automatically shutdown.
FAN speed select button
Press to cycle between Low
and High fan speeds.
9
POWER indicator
Becomes lit when
mains power is
connected.
TIMER indicator
Becomes lit when
an automatic
timer is set
CM3000
|6
REMOTE CONTROL
Preparation Before Operation
Remove the battery cover and insert new
batteries (AAA), making sure the +and
-match the compartment markings (Fig
12).
During Operation
If the remote control will not operate the
air conditioner, the batteries may need to
be replaced.
Remove the batteries and replace with
new ones. If this does not solve the
problem contact your nearest service
centre for advice.
Note! The air conditioner must be
plugged in and switched on for the remote
control to operate the air conditioner. To
use, point at the front panel and press
the remote button (Figure 10). The air
conditioner will “beep” when signal
has been received. If there is no beep,
press the remote button again, ensuring
it is within range (6 metres) of the air
conditioner.
Note! If there are two of the same air
conditioners installed, they cannot be
controlled separately. When you operate
either remote, it will turn on both air
conditioners if they are both within signal
range (6 metres).
Care of your Remote Control
Don’t let the remote control drop onto
hard surfaces or be subjected to sudden
shocks of any form. The warranty does
not cover misuse or accidental damage.
Don’t place the remote control in direct
sunlight, or near extremes of temperature.
Don’t allow the remote control to get wet.
Don’t place near strong electromagnetic
waves.
Don’t mix old and new batteries!
If the remote control will not be used for a
long time, remove the batteries to avoid
corrosion.
Note! The remote will display AUTO
mode. AUTO mode is not applicable for
this model of air conditioner. When AUTO
mode is selected the air conditioner will
make a beeping sound and continue to
operate in COOL mode. Nothing will be
displayed on the air conditioner.
12
OWNER’S MANUAL |7
Starting the air conditioner
Step 1: Ensure the air conditioner is
plugged in at the wall power outlet and is
switched on.
Step 2: Press the POWER button on the
control panel or remote control (Fig. 9 &
10).
Mode selection
Step 3: Press the MODE button on the
control panel or the remote control to
select the operating mode.
• Cool mode - refrigerated cooling
• Fan mode - fan only operation.
• Dry mode - for extracting moisture
from the air.
Step 4: Press the UP and DOWN buttons
to set the thermostat room temperature
in 1°C (or 2°F) increments. The set
temperature range is 17°C - 30°C (62°F
- 88°F). Cooling will only occur if the set
temperature is less than the ambient
room temperature.
Press both UP and DOWN together
to change between Centigrade and
Fahrenheit temperature scales.
Note! Do not set the cooling temperature
too low as this will consume more
power. 24°C is the recommended set
temperature.
Note! In Cool mode the fan will continue
to operate even if the compressor has
turned off.
Step 5: Press the FAN button on the
remote control to adjust the fan speeds.
Sleep mode
During sleep mode the set temperature
will increase 1°C every 30 minutes for 1
hour, after which the new temperature
will be maintained for 7 hours before
reverting to the original set temperature.
Step 6: Press the SLEEP button (remote
only) to activate sleep mode. Sleep mode
can only be used in Cool mode.
Sleep mode will be cancelled if the mode
is changed or the air conditioner goes into
stand-by or the water full alert occurs.
Important! During cooling mode, water
will collect in the air conditioner’s tank.
This water is re-circulated, with some
being exhausted out with the hot air, but
will slowly !ll up the tank. This occurs
more quickly in humid conditions. If the
tank should !ll, the air conditioner will
shut down and display the water full
error code (see Troubleshooting). The
air conditioner cannot be restarted until
the water tank is drained. Refer to the
Maintenance section for draining the tank
should this occur.
Air deflector
The air outlet vanes can be set to the
desired position manually. Keep the
vanes fully open during operation.
OPERATION
CM3000
|8
Timer Function
The air conditioner is •tted with a timer
function that allows the automatic start-up
or shut-down of the air conditioner after a
set period of time.
Note! The timer can only be set using the
remote control.
Automatic Start up:
Step 1: With the air conditioner turned
off, press the TIMER ON button on the
remote. The timer setting will be shown
on the remote display.
Step 2: Continue pressing the TIMER ON
button to change the timer setting. Timer
range is 0 - 24 hours. Once set, the Timer
indicator on the control panel will become
lit.
Automatic Shut-down:
Step 1: With the air conditioner turned
on, press the TIMER OFF button on the
remote. The timer setting will be shown
on the remote display.
Step 2: Continue pressing the TIMER
OFF button to change the timer setting.
Timer range is 0 - 24 hours. Once set, the
Timer indicator on the control panel will
become lit.
To cancel the timer, set the timer to ‘00’
or turn the air conditioner on or off.
OPERATION cont.
Table of contents
Popular Air Conditioner manuals by other brands
Fujitsu
Fujitsu Inverter ASBA30JFC operating manual
Toshiba
Toshiba RAS-M10SMUV-E installation manual
Daikin
Daikin FXLQ20MAVE Operation manual
Hitachi
Hitachi RAS-E24CAK instruction manual
CIAT
CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance
Bestron
Bestron AAC6000 instruction manual
