DO NOT INSTALL THE COOLMASTERNET IN THE FOLLOWING LOCATIONS:
a) Where a mineral oil mist or oil spray or vapor is produced, for example, in a kitchen.
Plastic parts may deteriorate and fall off or result in water leakage.
b) Where corrosive gas, such as sulfurous acid gas, is produced.
Corroding copper pipes or soldered parts may result in refrigerant leakage.
c) Near machinery emitting electromagnetic waves.
Electromagnetic waves may disturb the operation of the CoolMasterNet and cause the unit to
malfunction.
d) Where flammable gas may leak, where there is carbon fiber or ignitable dust suspensions in the
air, or where volatile flammable such as thinner or gasoline are handled.
Operating the CoolMasterNet in such conditions can cause a fire.
e) High temperature area or directly flamed point.
Heating and/or fire can occur.
f) Moist area, where there is exposure to water.
If water enters the inside of the CoolMasterNet, it may cause electric shock and electrical components
may fail.
Failure to follow CAUTION may result in serious injury or property damage,
and in certain circumstances, may result in a grave consequence.
Caution
