HTR-10
2
Contronics Engineering B.V., Ambachtsweg 8, 5492 NJ Sint-Oedenrode, The Netherlands,
hereby declares that the product HTR-10, produced and delivered by Contronics Engineering
B.V., are in accordance with the following CE directives:
EMC-Directive : 2014/30/EU
Directive for low-voltage
electrical installation : 2014/35/EU
RoSH-Directive : 2011/65/EU
1. PREFACE
This user manual contains the operating and installation instructions for the HTR-10
model controller.
2. INTRODUCTION
The HTR-10 is a room hygrostat and remote control for the HU-xxx series of humidiers.
It features a very accurate in-built humidity sensor and temperature sensor. The humidity
sensor is also very accurate in the higher regions of relative humidity. An built-in heating
element within the sensor element ensures that the sensor remains dry when the dew
point is reached. The core feature of the electronics is a programmed microchip designed
by Contronics. The electronic circuit board is protected against moisture.
3. CONTENT OF THE DELIVERY
When you receive the controller, the package must contain the following items:
HTR-10
3-meter cable with plug
Wall-mounting bracket
User manual
4. ASSEMBLY
The cable with plug that accompanies the HTR-10
is normally placed at the bottom.
The alternative is to place the cable in the centre,
at the back of the controller.
Figure 1. Cable normal and alternative.
