CommScope ARRIS SURFboard SB8200 User manual
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem
User Guide, STANDARD Revision x.3
P/N 365-095-30000
CommScope copyrights and trademarks
© 2021 CommScope, Inc. All rights reserved.
No part of this content may be reproduced in any form or by any means or used to make
any derivative work (such as translation, transformation, or adaptation) without written
permission from CommScope, Inc. and/or its affiliates (“CommScope”). CommScope
reserves the right to revise or change this content from time to time without obligation on
the part of CommScope to provide notification of such revision or change. ARRIS and the
ARRIS Logo are trademarks of CommScope, Inc. and/or its affiliates. All other trademarks are
the property of their respective owners.
Wi-Fi Alliance®, Wi-Fi®, the Wi-Fi logo, the Wi-Fi CERTIFIED logo, Wi-Fi protected access®
(WPA), the Wi-Fi Protected Setup logo, and WMM® are registered trademarks of Wi-Fi
Alliance. Wi-Fi Protected Setup™, Wi-Fi Multimedia™, and WPA2™ are trademarks of Wi-Fi
Alliance.
CommScope provides this guide without warranty of any kind, implied or expressed,
including, but not limited to, the implied warranties of merchantability and fitness for a
particular purpose. ARRIS may make improvements or changes in the product(s) described in
this manual at any time.
The capabilities, system requirements and/or compatibility with third-party products
described herein are subject to change without notice.
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 2
Safety and regulatory information
Read all safety and regulatory information before installing your device and setting up your
home network connection.
Important safety instructions
Read this before you begin — When using your equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury to persons, including
the following:
■Read all the instructions listed here and/or in the user manual before you operate
this device. Give attention to all safety precautions. Retain the instructions for future
reference.
■This device must be installed and used in strict accordance with manufacturer’s
instructions, as described in the user documentation that is included with the device.
■Comply with all warning and caution statements in the instructions. Observe all warning
and caution symbols that are affixed to this device.
■To prevent fire or shock hazard, do not expose this device to rain or moisture. The device
must not be exposed to dripping or splashing. Do not place objects filled with liquids,
such as vases, on the device.
■This device was qualified under test conditions that included the use of the supplied
cables between system components. To ensure regulatory and safety compliance, use
only the provided power and interface cables and install them properly.
■Different types of cord sets may be used for connections to the main POWER supply
circuit. Use only a main line cord that complies with all applicable device safety
requirements of the country of use.
■Installation of this device must be in accordance with national wiring codes and conform
to local regulations.
■Operate this device only from the type of power source indicated on the device’s
marking label. If you are not sure of the type of power supplied to your home, consult
your dealer or local power company.
■Do not overload outlets or extension cords, as this can result in a risk of fire or electric
shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked
wire insulation, and broken plugs are dangerous. They may result in a shock or fire
hazard.
■Route power supply cords so that they are not likely to be walked on or pinched by items
placed upon or against them. Pay attention to cords where they are attached to plugs
and convenience receptacles; and examine the point where they exit from the device.
■Place this device in a location that is close enough to an electrical outlet to
accommodate the length of the power cord.
■Place the device to allow for easy access when disconnecting the power cord of the
device from the AC wall outlet.
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 3
■Do not connect the plug into an extension cord, receptacle, or other outlet unless the
plug can be fully inserted with no part of the blades exposed.
■Place this device on a stable surface.
■Avoid damaging the device with static by touching the coaxial cable when it is attached
to the earth-grounded coaxial cable-TV wall outlet.
■Always first touch the coaxial cable connector on the device when disconnecting or
reconnecting the Ethernet cable from the device or user’s PC.
■Installation of an AC surge protector in the AC outlet to which this device is connected is
recommended. This is to avoid damaging the device by local lightning strikes and other
electrical surges.
■Postpone installation until there is no risk of thunderstorm or lightning activity in the
area.
■Avoid using a telephone (other than a cordless type) during an electrical storm. There is
a remote risk of electric shock from lightning. For added protection, unplug the device
from the wall outlet and disconnect the cables to avoid damage to this device from
lightning and power surges.
■Do not use this product near water. For example, near a bathtub, washbowl, kitchen
sink, laundry tub, swimming pool, or in a wet basement.
■Do not use the telephone to report a gas leak located near the leak.
■Do not cover the device or block the airflow to the device with any other objects.
Keep the device away from excessive heat and humidity and keep the device free from
vibration and dust.
■Wipe the device with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do
not spray cleaners directly on the device or use forced air to remove dust.
■For added protection, unplug the device from the wall outlet and disconnect the cables
to avoid damage to this device during lightning activity or power surges.
CAUTION: To reduce the risk of fire, use only No. 26 AWG or larger (e.g., 24 AWG)
UL Listed or CSA Certified Telecommunication Line Cord, or national equivalent.
■Upon completion of any service or repairs to this device, ask the service technician to
perform safety checks to determine that the device is in safe operating condition.
■Do not open the device. Do not perform any servicing other than that contained in the
installation and troubleshooting instructions. Refer all servicing to qualified service
personnel.
■This device should not be used in an environment that exceeds 104° F (40° C).
SAVE THESE INSTRUCTIONS
Note: To CATV system installer — This reminder is provided to call the CATV system
installer’s attention to Section 820.93 of the National electric code, which provides
guidelines for proper grounding and, in particular, specifies that the coaxial cable
shield must be connected to the grounding system of the building, as close to the
point of cable entry as practical.
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 4
FCC statements
FCC Interference statement
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the device off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
■Increase the separation between the device and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
■Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
CAUTION: Any changes or modifications not expressly approved by CommScope for
compliance could void the user’s authority to operate the equipment.
FCC Declaration of Conformity
CommScope, Inc, 3871 Lakefield Drive, Suwanee, GA 30024, declares that the SURFboard
device complies with 47 CFR Parts 2 and 15 of the FCC rules as a Class B digital device.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. To comply with the FCC RF exposure compliance requirements, the separation
distance between the antenna and any person’s body (including hands, wrists, feet and
ankles) must be at least 8 inches (20.3 centimeters).
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter except those already approved in this filing.
The availability of some specific channels and/or operational frequency bands are country
dependent and are firmware programmed at the factory to match the intended destinations.
The firmware setting is not accessible by the end user.
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 5
Caring for the environment by recycling
your ARRIS equipment
Please do not dispose of this product with your residential or commercial
waste. Contact your local authorities for information about practices
established for your region. If collection systems are not available, call
ARRIS Technical Support at 1-877-466-8646 for assistance.
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 6
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 7
Table of contents
Chapter 1: Getting started........................................................................ 9
In the box....................................................................................................................... 9
Additional items needed (not included)...................................................................... 10
System requirements....................................................................................................10
Contact information..................................................................................................... 10
Chapter 2: Product overview.................................................................. 11
Front panel................................................................................................................... 11
Rear panel.....................................................................................................................12
Cable modem label...................................................................................................... 13
Chapter 3: Installing the cable modem................................................... 14
Connect the SB8200 to your computer....................................................................... 14
Establish an Internet connection..................................................................................15
Chapter 4: Using the Web Manager........................................................16
Start your SB8200 Web Manager.................................................................................16
Web Manager screen options............................................................................17
Get help........................................................................................................................ 18
Exit the Web Manager................................................................................................. 19
Chapter 5: Monitoring your cable modem and protecting your
connected network............................................................................. 20
Change the default user password.............................................................................. 20
View the cable modem product information...............................................................21
View the cable modem network connection status.................................................... 22
View the cable modem event log................................................................................ 23
Enable Link Aggregation Configuration........................................................................ 24
Reset the cable modem configuration settings........................................................... 25
Reboot the cable modem.............................................................................................25
Exit the Web Manager................................................................................................. 25
Chapter 6: Troubleshooting tips..............................................................27
Troubleshooting Solutions............................................................................................27
Front panel LED icons and error conditions.................................................................28
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 8
Chapter 1
Getting started
The ARRIS SURFboard® SB8200 DOCSIS 3.1 Cable Modem provides significantly higher
downstream (send) and upstream (receive) Internet connection speeds over the broadband
connection on your home or small business network. You use your SB8200 to directly
connect a computer or router to your LAN through an Ethernet connection.
This guide provides instructions for installing and setting up your SB8200 to get it connected
on your home or small business network, and also for viewing the operational status and
network configuration settings of your SB8200.
In the box
Before installing your SB8200, check that the following items are included in the box. If any
items are missing, please call ARRIS Customer Support at 1-877-466-8646 for assistance.
SB8200 package contents
Item Description
SB8200 Cable Modem High-speed DOCSIS 3.1 cable modem
Power Supply Power cord for an electrical wall outlet connection
Software License &
Regulatory Card
Contains safety and regulatory information,
software license, and warranty for the cable
modem
Support Information
Card
Provides contact information for obtaining
technical support assistance with any issues you
may have with your SURFboard device
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 9
Chapter 1: Getting started
Item Description
SB8200 Quick Start
Guide
Provides basic instructions for installing the cable
modem and setting up your network connection
Additional items needed (not included)
The following item is not included in the box and must be purchased separately, if needed.
■Coaxial (coax) cable, if one is not already connected to a cable wall outlet
■Ethernet cable
System requirements
■High-speed Internet access account
■Web browser access – Internet Explorer, Google Chrome, Firefox, or Safari
■Compatible operating systems:
● Windows® 10
● Windows 8
● Windows 7 Service Pack 1 (SP1)
Note: Although older versions of Microsoft Windows operating systems are
no longer specifically supported, they should still function with your SB8200.
● Macintosh® 10.4 or higher
● UNIX®
● Linux®
Contact information
For technical support and additional ARRIS product information:
■Visit the ARRIS Support website: www.arris.com/selfhelp
■Call ARRIS Technical Support: 1-877-466-8646
SURFboard® SB8200 DOCSIS® 3.1 Cable Modem User Guide STANDARD Revision x.3 10
Other manuals for ARRIS SURFboard SB8200
1
Table of contents
Other CommScope Modem manuals
CommScope
CommScope SURFboard SVG2482AC User manual
CommScope
CommScope ARRIS SURFboard SB6190 User manual
CommScope
CommScope ARRIS SURFboard SB6183 User manual
CommScope
CommScope SURFboard SBG8300 User manual
CommScope
CommScope Arris G34 User manual
CommScope
CommScope SURFboard SBV3202 User manual
CommScope
CommScope ARRIS SURFboard SBV2402 User manual
CommScope
CommScope EGS5 User manual
CommScope
CommScope ARRIS SURFboard SB8200 User manual
CommScope
CommScope SURFboard SBG6950AC2 User manual
