Comeup DV-6000L User manual

Table of contents

Popular Winch manuals by other brands

WARRIOR

WARRIOR Trojan 40PUS12 Assembly & operating instructions

SVERO

SVERO 16 User instructions

Warrior Winches

Warrior Winches C10000NH owner's manual

Badland Winches

Badland Winches 68146 Installation and operating instructions

Bush

Bush II Series quick start guide

Badland

Badland APEX 5500 user manual

Quadratec

Quadratec Q9000 Synthetic Operator's guide

C-Max

C-Max VIGO Installation & operation manual

Orvea

Orvea Italwinch 805 Installation and user manual

Prowinch

Prowinch PWJTHF300 user manual

Clas Ohlson

Clas Ohlson LD2000-A manual

Topex

Topex 97X080 Instructions for use

Eastbound

Eastbound MotoWinch 1707001 operating instructions

Runva

Runva EWD8000 Assembly & operating instructions

Ingersoll-Rand

Ingersoll-Rand LIFTSTAR FG 1500/CN Series Parts, operation and maintenance manual

Granit

Granit 11157675 operating instructions

TREX

TREX TB75 user manual

Badland

Badland ZXR 2500 user manual

Self-Recovery Winch

Model: DV

-

60

0

0

L

PN: 852806 12V DC

854526 24V DC

Introduction

XFeature

Line pull: 2,722 kg / 6,000 lb wire rope first layer

Wire rope: 7.1 mm × 30.5 m (9/32" × 100′) galvanized aircraft A7 × 19

Brake: Patented cone brake holds full load

Clutch: Turn the T-handle for rapid wire rope payout

Control: Handheld pendant switch powers the winch

XUnpacking

．Winch assembly………………………………………………………….. 1 pc

．Control box………………………………………................................... 1 pc

．Remote control…………………………………………………………… 1 pc

．Wire rope with hook……………………………………………………… 1 pc

．Roller fairlead…………………………………………………………….. 1 pc

．1.8 m ( 6′) 4 gauge battery lead……………...………………….......... 1 pc

XRead this manual carefully

You should carefully read and understand this manual before operating it.

Careless winch operation may result in personal injury hazards or property

damage.

XInformation requesting or parts ordering

Please specify the following information:

．Winch PN ．Serial number

．Part description ．Replacement part number

．Quantit

y

for each

p

art

Installation

Before using the winch, make sure all electrical components have no corrosion

or damaged; the environment should be clear and dry.

XWinch and roller fairlead mountings

．It is very important that the winch will be mounted on a

flat and hard surface of mounting channel in order to

make sure the motor, drum and gearbox housing are

aligned correctly.

．Roller fairlead does not mount to the winch directly.

．The wire rope shall be wound in an under-wound orientation only.

．Four (4) M10 x 1.50 pitch 8.8 grade high tensile steel bolts must be used in

order to sustain the loads imposed on the winch mounting.

．Two (2) M10 x 1.50 pitch 8.8 grade high tensile steel bolts must be used for

fastening the roller fairlead into the mounting channel.

XWiring Diagram

Attach the black lead firmly to the negative (–)battery terminal and red lead to

the positive (+) battery terminal. The voltage drop for the winch motor must not

exceed 10% of the nominal voltage of 12/24V DC.

XNut fastening for motor & contactor

1.Holding the lower nut on the stub and fastening the upper nut clockwise.

2.The torque setting for nut is 14 N-m/124 lb-in.

Warning

．The winch is not intended to be used in any manner for the movement or

lifting of personnel.

．The rated line pull shown is based on the first layer of rope on the drum.

．The rope winding on the drum shall remain 5 wraps from the drum.

Parts List

Item No. Description Part No. Qty

Motor 12V 881505

1 Motor 24V 881506 1

2 Tie bar kit 880142 2

3 Motor support rack 880077 1

4 Motor coupling 880078 1

5 Drum bushing 880006 1

6 Drum kit 880105 1

7 Drum bushing B 880081 1

8 Gearbox support rack 880082 1

9 Wire rope w/hook 881060 1

10 1st shaft 881229 1

11 Grounding lead 880085 1

12 3rd ring gear kit 880086 1

13 2nd stage carrier 880087 1

14 1st stage carrier 880088 1

15 Retaining ring 880089 1

16 1st & 2nd ring gear 880090 1

17 1st pinion kit 880091 1

18 Clutch kit 880092 1

19 Gear box kit 880093 1

20 Cone brake disc kit 880094 1

21 Brake clutch base 881099 1

22 Brake cover kit 880095 1

23 Roller fairlead WA-0510 880023 1

24 Mounting hardware 880097 1

25 Remote control WA-0310 880025 1

26 Handsaver strap 880026 1

Control box 12V 880098

27 Control box 24V 880099 1

27-1 Remote socket kit 881289 1

Control pack 12V 881446

27-2 Control pack 24V 881447 1

28 Base plate kit 881514 1

Winch Assembly