Code Alarm CATX510 Operating instructions

Model CATX510

Programming Guide

The keychain transmitters included with the system have been pre-

programmed at the factory, with each button pre-assigned to control a specific

function of the system.

The system will store codes from up to 4 different transmitters. If a 5th

transmitter is programmed to the system, then the first transmitter

programmed to the system will be erased from the system’s memory.

To program new or additional transmitters:

1. Enter the vehicle, and turn the ignition switch to the ON position.

2. Press and release the programming button switch 3 times.

3. The dash mounted LED will flash 1 time, and the parking lights will flash 1

time, indicating that the system is ready to accept programming of channel 1

which is LOCK.

4. Press and hold the lock icon button of the transmitter you wish to program

for 4 seconds or until a long flash from the parking lights.

4a. Repeat step 4 for any additional transmitter you wish to program.

5. Press and release the programming button switch 1 time to advance to

channel 2. The parking lights will flash 2 times and the dash mounted LED will

flash 2 times, indicating that the system is ready to accept programming for

channel 2 which is UNLOCK.

6. Press and hold the unlock icon button of the transmitter you wish to

program for 4 seconds or until a long flash from the parking lights.

6a. Repeat step 6 for any additional transmitter you wish to program.

7. Press and release the programming button switch 1 time to advance to

channel 3. The parking lights will flash 3 times and the dash mounted LED will

flash 3 times, indicating that the system is ready to accept programming for

channel 3 which is REMOTE START.

8. Press and hold both buttons simultaneously of the transmitter you wish to

program for 4 seconds or until a long flash from the parking lights.

8a. Repeat step 8 for any additional transmitter you wish to program.

Changing the Remote Control Battery

The 12-volt alkaline battery supplied in your remote

transmitter should last approximately one year, depending on

usage. When the battery begins to weaken, you will notice a

decrease in range, or the distance from your vehicle that

your remote transmitter will operate. Follow the instructions

below to change the remote transmitter battery.

For Customer Service and Product information Call

1-800-421-3209

1. Insert the edge of a coin into the slot at the side of the

remote control. Twist the coin to pry the remote control

halves apart.

2. Remove the old battery and replace with a new one.

Be sure to observe the (+) and (-) signs in the battery

compartment.

3. Carefully snap the case halves back together, then test

the remote control.

Model CATX510

Programming Guide

Table of contents

Other Code Alarm Car Alarm manuals

Code Alarm

Code Alarm Professional Series CA 1550 User manual

Code Alarm

Code Alarm CSI-300 User manual

Code Alarm

Code Alarm CATX2LED Operating instructions

Code Alarm

Code Alarm CA100 User manual

Code Alarm

Code Alarm CATX110 Operating instructions

Code Alarm

Code Alarm CATX520 Operating instructions

Code Alarm

Code Alarm CA-140 User manual

Code Alarm

Code Alarm CA-160 User manual

Code Alarm

Code Alarm CA-120 User manual

Code Alarm

Code Alarm F20 User manual

Code Alarm

Code Alarm PowerCode PC 7300 User manual

Code Alarm

Code Alarm CA 420A User manual

Code Alarm

Code Alarm CA-330 User manual

Code Alarm

Code Alarm CA 6151 User manual

Code Alarm

Code Alarm Professional 1000 User manual

Code Alarm

Code Alarm ELITE Series User manual

Code Alarm

Code Alarm ca 1051 User manual

Code Alarm

Code Alarm ca 1552 Professional Series User manual

Code Alarm

Code Alarm CA 510 User manual

Code Alarm

Code Alarm CA-230 User manual

Code Alarm

Code Alarm PROFESSIONAL SERIES User manual

Code Alarm

Code Alarm CA611 User manual

Code Alarm

Code Alarm Car Alarm CA-310 User manual

Code Alarm

Code Alarm caSEC Installation and operating manual

Popular Car Alarm manuals by other brands

Clifford

Clifford 3606X owner's guide

Ultra Start

Ultra Start 2500M SERIES install guide

Ultra Start

Ultra Start 650 Series owner's manual

Audiovox

Audiovox Prestige Platinum+ APS-511C owner's manual

Sparkrite

Sparkrite SRA8 Guide

Viper

Viper 4708V owner's manual

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Installation and maintenance manual

Falcon

Falcon Predator XL3 Installer manual

Audiovox

Audiovox Auto Security XR91 Programming guide

Clifford

Clifford Sabre II owner's manual

CrimeStopper

CrimeStopper CS-8717 Wiring diagram

Ultra Start

Ultra Start 450 SERIES install guide

Scytek electronic

Scytek electronic Vectra X3 product manual

Excalibur

Excalibur AL-1860-EDPB Operation guide

Clifford

Clifford CYBER 2 owner's manual

Gemini

Gemini 7057 user manual

FlashLogic

FlashLogic FLRSBA PRESTIGE Product guide

Magicar

Magicar FAI-440 manual