Clevertronics FBKLED Series Instruction Manual

1949357 V2.0 August 2020

Maintenance:

Lamp Replacement:

•Use only the LED panel inside the Bunkalite

and listed on this instruction

•To replace the LED panel, remove the

screws, disconnect the signal wires and install

the new LED panel.

Warranty:

For Product Warranty information and Terms and Conditions of Sales please refer to our website

http://clevertronics.com.au/terms-conditions-sale-australia-nz/

Victoria (Head Office & Manufacturing)

Website: www.clevertronics.com.au

Email: info@clevertronics.com.au

Phone: +61 3 9559 2700

Fax: +61 3 9559 2799

New South Wales

Phone: +61 2 8805 6400

Fax: +61 2 8805 6444

Queensland

Phone: +61 7 3442 9700

Fax: +61 7 3442 9777

South Australia/Northern Territory

Phone: +61 8 8301 8800

Fax: +61 8 8351 8286

Western Australia

Phone: +61 8 9248 3720

Fax: +61 8 9248 3725

New Zealand

Phone: +64 800 548 448

Models: FBKLED-vv-xx-yy-zz

Options:

xx = MS

Microwave Sensor

yy = DD

DALI LED Driver

zz = BLK

Black in Colour

vv = WW

Warm White

Spare Parts:

8002801 - PCA: CLE 220mm 2500lm 840 ADV4 EM SO

8002802 - PCA: CLE 220mm 2500lm 830 ADV4 EM SO (For use with -WW option)

1190310 - SENSOR:M/Wave Motion Remote MC015S/D

1330049 - LED Driver - LC 20w 350/500/700mA flexC SR ADV

1330045 - LED Driver –17w 250-700mA Dimmable (For use with –DD option)

Important:

It is illegal for anyone, except for a licensed electrician to install or maintain this product. Before

installation, ensure that the electricity supply has been switched off and isolated. Installation must be

carried out in accordance with the relevant Australian and International Standards.

240V LED Bunkalite

Installation & Maintenance Instruction Leaflet

1949357 V2.0 August 2020

Installation:

The LED Bunkalite (FBKLED) can be installed either Ceiling or Wall Mounted.

•Remove the four (4) screws holding the ring to the fitting.

•Remove the four (4) screws holding the gear tray to the base.

•At this point you must decide if the supply cable entry will be via the entry point provided, in the

channel recess between the outer-rim and the base, or if a new cable entry is to be drilled into the

rear of the base. NOTE: if you choose to use the cable entry point provided the luminaire cannot be

positioned/centred over the supply cable point on the wall or ceiling. The supply cable must line up

with the recessed channel as shown below.

•Using the base as a guide, mark 2 holes for mounting and one for mains access.

•Mount the base using appropriate fixings and seal these fixings with silicone (fill any additional entry

points with silicone also)

•Route the power inside the base.

•Connect the 240VAC (A, E, N) supply to the terminal block of the gear tray.

•Connect the DALI Lines to the terminals marked “DA DA” on the gear tray.

•Install the gear tray to the base.

•Apply power to the fitting and test per the instructions.

Other Clevertronics Lighting Equipment manuals

Clevertronics

Clevertronics LP CSBLED Series Installation and operating instructions

Clevertronics

Clevertronics LP LIFELIGHT PRO CLIFE-PRO-SMS-SPOT Series Installation and operating instructions

Clevertronics

Clevertronics LP CUBPRO Series User manual

Clevertronics

Clevertronics L10 Argonaut PLUS User manual

Clevertronics

Clevertronics LP Cleverfit CCFLED Series Installation and operating instructions

Clevertronics

Clevertronics CLP LIFELIGHT Pro User manual

Clevertronics

Clevertronics FBS2LED-DIF Series User manual

Clevertronics

Clevertronics ECFLED-LI-TH Series Installation and operating instructions

Clevertronics

Clevertronics L10 Weatherproof Jumbo LED Exit Installation and operating instructions

Clevertronics

Clevertronics ECFLED-LI Installation and operating instructions

Clevertronics

Clevertronics L10 LVP2LEDM-P Series Installation and operating instructions

Clevertronics

Clevertronics L10 ARGOPRO-1200-L10POD Series User manual

Clevertronics

Clevertronics L10 LIFELIGHT PRO LLIFE-PRO SPOT Series Installation and operating instructions

Clevertronics

Clevertronics L10 Cleverfit LCFLED Series Installation and operating instructions

Clevertronics

Clevertronics LED CIRCLITE Installation and operating instructions

Clevertronics

Clevertronics CLP LIFELIGHT PRO Technical specifications

Clevertronics

Clevertronics L10 LSBLED Series Installation and operating instructions

Clevertronics

Clevertronics Trade Series Installation and operating instructions

Clevertronics

Clevertronics LP CCIRC Series Operating and maintenance instructions

Clevertronics

Clevertronics L10 Ultrablade Pro LUBPRO-SM Series Instruction Manual

Clevertronics

Clevertronics LP Ultrablade Pro CUBPRO Series Installation and operating instructions

Clevertronics

Clevertronics L10 CleverFit Exit LCFLED Series User manual

Clevertronics

Clevertronics LP Cleverfit Pro CCFPRO Series Installation and operating instructions

Clevertronics

Clevertronics Trade TS CIRCLITE ECLLED Series Installation and operating instructions

Popular Lighting Equipment manuals by other brands

Brizo

Brizo 8SP-MU-4 manual

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 installation instructions

IKEA

IKEA BJÖRKSPIREA manual

Laserworld

Laserworld Evolution Series ES-400RGB manual

Alien

Alien RG STAR user manual

EuroLite

EuroLite LED B-40 user manual

Qazqa

Qazqa Suplux SL 3 Black 103062 instruction manual

Commercial Electric

Commercial Electric 54568141 Use and care guide

CREE LIGHTING

CREE LIGHTING 304 Series installation instructions

Goobay

Goobay 49867 user manual

ECOMAN ITALIA

ECOMAN ITALIA LED T8 instruction manual

Alkalite

Alkalite Krypton KT-81 user manual

Clas Ohlson

Clas Ohlson GU10 manual

DTS

DTS DELTA 10 F user manual

ring

ring Solar Steplight manual

One Stop Gardens

One Stop Gardens 57696 Owner's manual & safety instructions

Chauvet DJ

Chauvet DJ COREpar UV120 ILS user manual

SIREM

SIREM Swimeo A2 instructions