clare CS-PNC-10 User manual
Use the panel installation guide to verify proper system setup.
I
N
S
T
A
L
L
G
U
I
D
E
I
Wristband Lanyard
The CS-PNC-10 is a supervised portable device used to
trigger a panic alarm.
Features
• Water resistant housing
• Low battery indication
• Secure encrypted wireless transmissions
• Can be worn with a lanyard or wristband
Enroll the panic by placing the panel into wireless
enrollment mode and pressing the red panic button. Alternatively, the panic can
be enrolled by scanning its bar code using the Install Assist App or by entering its
8-character serial number on the interactive service provider’s web portal.
Operate by pressing the red panic button until the LED starts ashing.
Wear using the included lanyard or wristband. Note: To install the wristband you must rst
remove the clear plastic tube used to attach the lanyard.
CS-PNC-10
Panic Pendant
Specications
Physical
Housing Dimensions
Weight with Battery
1.5 x 1.2 x .6 inches (3.8 x 3.0 x 1.5 centimeters)
0.6 ounces (18 grams)
Environmental
Operating Temperature
Maximum Humidity
32°F to 120°F (0°C to 49°C)
85% non-condensing relative humidity
Sensor Specications
Frequency
Replacement Battery
Nominal Battery Life
Transmitted Indications
433.92 MHz
One Panasonic CR1632
4-6 Years
Low Battery, Panic, Supervision
Certication
RE603 FCC, IC, RCM, EN 60950-1, EN 300 220, EN 301 489, CE
Security Grade 2, CE Environmental Class 2
Specications subject to change without notice
2019-02-1842-01
941.238.3991
www.ClareControls.com
Original document below
https://bit.ly/2Nq8hf5
Other clare Security System manuals
Popular Security System manuals by other brands
EDM
EDM Solution 6+6 Wireless-AE installation manual
Highway Safety Group
Highway Safety Group EA401 user manual
Siren
Siren LED GSM operating manual
Detection Systems
Detection Systems 7090i Installation and programming manual
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 instructions
Siemens
Siemens FDM273 manual