Clabel CT320B User manual
CT320B
Label Printer
Quick Installation
Guide
NPACKING CHECKLIST
1
Printer
Data cable Installation Guide
Installation
APPEARANCE COMPONENT
2
Front view
Open the top cover
USB connector
Lanyard hole position
Display
Cutter
Power / Menu
Confirmation/
Paper advance button
Top cover
opening button
Upward
Downward
Fixer
Rubber roller
Printhead
Reset button
KEY DESCRIPTION
3
（1）Press and hold the power button for 2 seconds to turn the
printer on.
（2）When the power is on, press and hold the power button for
2 seconds to turn the printer off.
（3）In standby mode, click the power button to enter the setup menu.
（4）When entering the setup menu, press the power button to return
to the previous level page.
Press and hold the Power button and OK button at the
same time to print the self-test page.
（1）Label sheet: Click OK to walk away from a label sheet to position
and adjust it to the start of the next label.
（2）Continuous paper: click OK to go 10mm, long press to keep going,
release the button to stop going.
（3）When you enter the Setup menu, click OK to confirm your selection.
When entering the Setup menu click the Down button to go down
and select the Setup item.
（1）When entering the Setup menu click the Up button to go up
and select a setting item.
（2）Increase the number of prints upwards when entering the offline
print confirmation template.
PAPER ROLL LOADING
4
①Open the top cover, move the jammer lock switch forward to OPEN, and insert
the paper roll as shown.
Thermosensitive
layer
1、Press the top cover open button downward to open
the top cover.
2、Install the paper roll as shown in the figure below.
②Push the retainer to the left until it snaps the paper roll properly and then
push the locking switch back to lock it.
③Pull out part of the paper roll and close the top cover, making sure that
both sides of the top cover are closed.
SCREEN INFORMATION
5
①Bluetooth Indication
Icon area
②External Power
Indication
③Battery
Power Indication
Text Area
CT320B-XXXX
Icon area description
①Bluetooth Indication
When Bluetooth is not paired, the icon blinks, after Bluetooth is paired the
icon is always on.
②External Power Supply Indication
Always on when the USB port is connected to the power supply, and the icon
disappears when the power is disconnected.
③Battery Level Indication
The battery icon indicates a full charge at 4 cells.
Displays charging animation while the battery is charging, incrementing
frame by frame.
When the battery icon is flashing, it means the power is low, please charge it.
Text Area Description
Options
Function
items
Advanced
Settings
Other
Information
Off-line
Printing
Display the templates stored in the printer, up to 10 templates can
be printed after confirming the number of template input sheets
Print speed Low speed, medium speed, high speed
Print Density 1~15 gears adjustable
Paper Type Gap paper, black label paper, continuous paper
Print command TSPL，ESC
Print Direction Default, rotate 180°
Memory Printing On, off
Auto shutdown 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes, off
Horizontal Offset -10mm ~ +10mm
Vertical Offset -10mm ~ +10mm
Prompt tone On, off
Display Language Chinese，English
Restore factory
settings Press the Confirm button to restore the factory settings
Manufacturer Shenzhen Dudian Technology Co., Ltd.
Equipment Model CT320B
Serial number Display product serial number
Hardware Version Display the product hardware version number
Firmware Version Display the product firmware version number
Bluetooth Name CT320B-XXXX（Automatic acquisition of the last four digits of the Bluetooth
address unique code）
Bluetooth Address Display Bluetooth MAC address
Parameters
1、Screen Settings
Tip content
Excessive temperature Print head temperature is too high, please wait.
Pause printing Pause in printing, please press the confirmation button
to continue printing
Top cover not closed The printer top cover is not closed in place, please close the cover.
Lack of paper The printer paper bin is out of paper, please install the paper roll.
Factory settings have
been restored. Printer restores factory settings successfully
Printing in progress Printing in progress, please wait
Print completion Print completion
Status
2、Screen Tips
OFTWARE DOWNLOAD
6
Windows
Scan the QR code below with a mobile phone to download “YunPrint”.
Please operate the software follwing the software guidance.
iOS / Android
Visit website: https://yunprint.dlabel.cn/pc
to download “YunPrint”and driver.
Download label editing app "
YunPrint
"
from Google Play Store or Apple APP Store
and install it.
YunPrint
YunPrint
Table of contents
