Cisco WAP121 User manual

Other manuals for WAP121

9

This manual suits for next models

13

Table of contents

Other Cisco Wireless Access Point manuals

Cisco

Cisco Aironet 1300 Series Manual

Cisco

Cisco AIR-CAP1552H-x-K9 User manual

Cisco

Cisco AIR-MP20B User manual

Cisco

Cisco Small Business WAP551 User manual

Cisco

Cisco MERAKI MR46E-HW Manual

Cisco

Cisco AIR-LAP1242AG-A-K9 User manual

Cisco

Cisco Aironet 1240AG Series User manual

Cisco

Cisco AIR-LAP1142N-A-K9 User manual

Cisco

Cisco 1130AG - Aironet - Wireless Access Point Manual

Cisco

Cisco Aironet OfficeExtend AIR-OEAP602I-E-K9 User manual

Cisco

Cisco 500 Series Operator's manual

Cisco

Cisco ASA 5506W-X User manual

Cisco

Cisco Catalyst 9136I Series User manual

Cisco

Cisco Catalyst IW9167E Manual

Cisco

Cisco Aironet 1530 Series Manual

Cisco

Cisco Aironet 3700 Series Quick reference guide

Cisco

Cisco Meraki MR46E User manual

Cisco

Cisco Linksys WAP54GX Original operating instructions

Cisco

Cisco Aironet 1520 Series User manual

Cisco

Cisco Wap581 Instruction Manual

Cisco

Cisco Aironet 1300 Series User manual

Cisco

Cisco 1232AG - Aironet - Wireless Access Point Manual

Cisco

Cisco AIR-LAP1310G User manual

Cisco

Cisco WAP121 Instruction Manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide

●

●

●

●

●

●

●

●

●

●

●

●

Reboot and Reset the Wireless Access Point

to Factory Default Settings

Objective

Rebooting or restarting the Wireless Access Point (WAP) deletes the logs stored in the

volatile memory. This process is performed when certain changes in the settings need a

reboot or if the WAP is not responding or booting up properly. Resetting the WAP to factory

default settings, on the other hand, erases all configurations that have been set by the user,

and restores the device to its original settings. A reset is recommended if most of the WAP

settings need to be reconfigured.

This article aims to show you how to reboot and reset your WAP to factory default settings.

Applicable Devices

WAP100 Series

WAP300 Series

WAP500 Series

Software Version

1.0.6.5 - WAP121, WAP321

1.0.2.8 - WAP131, WAP351

1.0.1.7 - WAP150, WAP361

1.3.0.3 - WAP371

1.2.1.3 - WAP551, WAP561

1.0.0.17 - WAP571, WAP571E

Reboot the Wireless Access Point

There are two ways to reboot the WAP:

Hardware reboot

Reboot through the web-based utility

Note: Images may vary depending on the exact model of your WAP. The images below are

taken from the WAP321.

Hardware Reboot

You have two ways to reboot the device hardware:

Turn the device off by pressing the POWER button while the device is connected to the

power outlet.

Note: The POWER button only works if the device is using a power adapter. If power is

supplied through Power over Ethernet (PoE), unplug your Ethernet connection for three

●

seconds then plug it back.

Press the Reset button for about three seconds only, or until the lights go off.

Reboot through the Web-based Utility

Step 1. Log in to the web-based utility of your WAP and choose Administration > Reboot.

Step 2. Click the Reboot button.

Step 3. Click OK in the confirmation window.

●

●

You should now have rebooted your device.

Reset to Factory Default Settings

There are two ways to reset the WAP to factory default settings:

Hardware reset

Reset through the web-based utility

Hardware Reset

Step 1. Press the Reset button for more than 10 seconds until the lights go off.

Step 2. Release the Reset button when the lights turn back on.

Reset through the Web-based Utility

Step 1. Log in to the web-based utility of your WAP and choose Administration > Reboot.

Step 2. Click the Reboot To Factory Default button.

Step 3. Click OK in the confirmation window.

You should now have reset your device to factory default settings.