Cisco WAP121 Instruction Manual

Cisco Small Business

WAP121 Wireless-N Access Point with PoE

and

WAP321 Wireless-N Selectable-Band Access Point

with PoE

ADMINISTRATION

GUIDE

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks,

go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner

does not imply a partnership relationship between Cisco and any other company. (1110R)

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 1

Contents

Chapter 1: Getting Started 7

Starting the Web-Based Configuration Utility 7

Launching the Web-Based Configuration Utility 8

Logging Out 9

Using the Access Point Setup Wizard 9

Getting Started 12

Window Navigation 13

Configuration Utility Header 13

Navigation Pane 13

Management Buttons 14

Chapter 2: Status and Statistics 15

System Summary 15

Network Interfaces 17

Traffic Statistics 18

WorkGroup Bridge Transmit/Receive 18

Associated Clients 19

TSPEC Client Associations 21

TSPEC Status and Statistics 23

TSPEC AP Statistics 24

Radio Statistics 25

Email Alert Status 26

Log 27

Chapter 3: Administration 28

System Settings 29

User Accounts 29

Adding a User 30

Changing a User Password 30

Time Settings 31

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 2

Contents

Log Settings 33

Configuring the Persistent Log 33

Remote Log Server 34

Email Alert 35

Email Alert Examples 37

HTTP/HTTPS Service 38

Configuring HTTP and HTTPS Services 38

Managing SSL Certificates 39

Management Access Control 40

Upgrade Firmware 41

TFTP Upgrade 41

HTTP Upgrade 42

Firmware Recovery 43

Download/Backup Configuration File 45

Backing Up a Configuration File 45

Downloading a Configuration File 46

Configuration Files Properties 47

Copy/Save Configuration 47

Reboot 48

Discovery—Bonjour 49

Packet Capture 49

Packet Capture Configuration 50

Local Packet Capture 51

Remote Packet Capture 52

Packet Capture File Download 55

Support Information 56

Chapter 4: LAN 57

Port Settings 57

VLAN and IPv4 Address Settings 58

IPv6 Addresses 59

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 3

Contents

Chapter 5: Wireless 62

Radio 62

Rogue AP Detection 69

Viewing the Rogue AP List 70

Creating and Saving a Trusted AP List 72

Importing a Trusted AP List 72

Networks 73

SSID Naming Conventions 73

VLAN IDs 74

Configuring VAPs 74

Configuring Security Settings 77

None (Plain-text) 77

Static WEP 77

Dynamic WEP 79

WPA Personal 81

WPA Enterprise 83

Scheduler 85

Adding Scheduler Profiles 85

Configuring Scheduler Rules 86

Scheduler Association 87

Bandwidth Utilization 88

MAC Filtering 88

Configuring a MAC Filter List Locally on the WAP Device 88

Configuring MAC Authentication on the RADIUS Server 89

WDS Bridge 90

WEP on WDS Links 92

WPA/PSK on WDS Links 92

WorkGroup Bridge 93

Quality of Service 96

WPS Setup 99

WPS Overview 99

Usage Scenarios 100

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 4

Contents

WPS Roles 101

Enabling and Disabling WPS on a VAP 101

External and Internal Registration 102

Client Enrollment 102

Optional Use of Built-In Registrar 103

Lockdown Capability 103

VAP Configuration Changes 104

External Registration 104

Exclusive Operation of WPS Transactions 105

Backward Compatibility with WPS Version 1.0 105

Configuring WPS Settings 105

Instance Status 107

WPS Process 107

Enrolling a Client Using the PIN Method 107

Enrolling a Client Using the Push Button Method 108

Viewing Instance Status Information 109

Viewing Instance Summary Information 109

Chapter 6: System Security 110

RADIUS Server 110

802.1X Supplicant 112

Password Complexity 114

WPA-PSK Complexity 115

Chapter 7: Client Quality of Service 116

Client QoS Global Settings 116

ACL 116

IPv4 and IPv6 ACLs 117

MAC ACLs 117

Configuring ACLs 117

Class Map 124

Adding a Class Map 124

Defining a Class Map 125

Policy Map 129

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 5

Contents

Client QoS Association 130

Client QoS Status 132

Chapter 8: Simple Network Management Protocol 134

SNMP Overview 134

General SNMP Settings 135

Groups 138

Users 140

Targets 141

Chapter 9: Captive Portal 143

Captive Portal Global Configuration 144

Instance Configuration 145

Instance Association 148

Web Portal Customization 148

Uploading and Deleting Images 151

Local Groups 152

Local Users 153

Authenticated Clients 154

Failed Authentication Clients 155

Chapter 10: Single Point Setup 157

Single Point Setup Overview 157

Managing Single Point Setup Across WAP Devices 158

Single Point Setup Negotiation 159

Operation of a WAP Device Dropped From a Single Point Setup 160

Propagation of Configuration Settings and Parameters in

Single Point Setup 160

Access Points 162

Configuring the WAP Device for Single Point Setup 162

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 6

Contents

Viewing Single Point Setup Information 164

Adding a New Access Point to a Single Point Setup Cluster 164

Removing an Access Point from a Single Point Setup Cluster 165

Navigating to Configuration Information for a Specific WAP Device 165

Navigating to a WAP Device Using its IP Address in a URL 166

Sessions 166

Channel Management 167

Viewing Channel Assignments and Setting Locks 169

Current Channel Assignments Table 169

Proposed Channel Assignments Table 170

Configuring Advanced Settings 170

Wireless Neighborhood 171

Viewing Details for a Cluster Member 173

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 7

Getting Started

This chapter provides an introduction to the Wireless Access Point (WAP) devices

web-based configuration utility, and includes these topics:

•Starting the Web-Based Configuration Utility

•Using the Access Point Setup Wizard

•Getting Started

•Window Navigation

Starting the Web-Based Configuration Utility

This section describes system requirements and how to navigate the web-based

configuration utility.

Supported Browsers

•Internet Explorer 7.0 or later

•Chrome 5.0 or later

•Firefox 3.0 or later

•Safari 3.0 or later

Browser Restrictions

•If you are using Internet Explorer 6, you cannot directly use an IPv6 address

to access the WAP device. You can, however, use the Domain Name System

(DNS) server to create a domain name that contains the IPv6 address, and

then use that domain name in the address bar in place of the IPv6 address.

•When using Internet Explorer 8, you can configure security settings from

Internet Explorer. Select Tools > Internet Options and then select the

Security tab. Select Local Intranet and select Sites. Select Advanced and

then select Add. Add the intranet address of the WAP device (http://<ip-

Getting Started

Starting the Web-Based Configuration Utility

Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 8

address>) to the local intranet zone. The IP address can also be specified

as the subnet IP address, so that all addresses in the subnet are added to

the local intranet zone.

•If you have multiple IPv6 interfaces on your management station, use the

IPv6 global address instead of the IPv6 local address to access the WAP

device from your browser.

Launching the Web-Based Configuration Utility

To open the configuration utility:

STEP 1 Open a web browser.

Enter the IP address of the WAP device that you are configuring in the address bar

on the browser and then press Enter. The Login page opens.

•To find your IP address, you can use the Cisco FindIT Network Discovery

Utility. This tool enables you to automatically discover all supported Cisco

Small Business devices in the same local network segment as your

computer. For more information, go to cisco.com and enter www.cisco.com/

go/findit.

•For further instructions on how to locate the IP address of your WAP device,

see the WAP device Quick Start Guide.

STEP 2 Enter the user name and password. The factory default user name is cisco and the

default password is cisco.

STEP 3 Click Log In. The Access Point Setup Wizard page opens.

If this is the first time that you logged on with the default user name (cisco) and the

default password (cisco) or your password has expired, the Change Admin

Password page opens. Enter the new password and confirm it, click Apply, and

then click Close. The new password is saved. Then, enter the user name cisco and

the new password on the Login page.

See Using the Access Point Setup Wizard for instructions on using the wizard.

Other manuals for WAP121

This manual suits for next models

Table of contents

Other Cisco Wireless Access Point manuals

Cisco

Cisco FM1000 Gateway Manual

Cisco

Cisco WAP371 User manual

Cisco

Cisco 1830 Series User manual

Cisco

Cisco AIR-LAP1252AG-A-K9 - Aironet 1252AG - Wireless Access... User manual

Cisco

Cisco Meraki MR84 Manual

Cisco

Cisco Meraki MR20-HW User manual

Cisco

Cisco ASA 5506-X User manual

Cisco

Cisco Linksys WAP55AG User manual

Cisco

Cisco Catalyst 9166 Series Manual

Cisco

Cisco Aironet 1200 Series Installation and operation manual

Cisco

Cisco Aironet 1250 Series User manual

Cisco

Cisco Aironet 700W Series User manual

Cisco

Cisco 1262 User manual

Cisco

Cisco Mesh Access Points Quick reference guide

Cisco

Cisco Aironet 1240AG Series User manual

Cisco

Cisco Catalyst Wireless 9164I Series User manual

Cisco

Cisco Aironet 2800I Series User manual

Cisco

Cisco Digistar EoC User manual

Cisco

Cisco Small Business AP541N User manual

Cisco

Cisco Meraki MR33 User manual

Cisco

Cisco 800 Series User manual

Cisco

Cisco Aironet 600 Series User manual

Cisco

Cisco WAP125 User manual

Cisco

Cisco Meraki Go GR62 User manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide