Cisco WAP371 User manual

Reboot and Reset Factory Default Settings on

the WAP371

Objective

The factory default reset erases all configuration settings that have been modified by the

user, and restores the device to its original settings. This may be helpful if you lose the

password to a device and wish to regain access.

Note: It is advised to save a backup copy of the configuration before beginning this process.

Refer to Download/Backup Configuration on the WAP 371 for additional information.

Performing a reboot restarts the device with a saved configuration.

The objective of this article is to show you how to reset to factory default settings and how to

reboot a WAP371 Wireless Access Point.

Applicable Devices

• WAP371

Software Version

• 1.0.1.5

Reset to Factory Default

There are two ways to reset the Access Point to the factory default configuration:

• Hardware reset

• Reset with the use of the web configuration utility

Hardware Reset

Step 1. Press the Reset button for approximately ten seconds with a pin located at the back

of the device.

The Access Point reloads and is set to the default configuration settings.

Step 2. Login with the default credentials. The default username is cisco, and the default

password is cisco.

Reset with the use of the Web Configuration Utility

Step 1. Log in into the web configuration utility page and choose Administration > Reboot.

The Reboot page opens:

Step 2. To reset the device, click the Reboot To Factory Default button.

A Confirm page appears:

Step 3. Click OK.

A Progress Bar appears:

Step 4. After the reboot is completed, login with the default credentials. The default

username is cisco, and the default password is cisco.

Rebooting the Device

There are two ways to reboot the Access Point:

• Hardware reboot

• Reboot with the use of the web configuration utility

Hardware Reboot

Step 1. Press the power button to turn off the device. After 10 seconds have passed, press

the power button a second time to power the device back on.

The Access Point reboots and is refreshed.

Reboot with the use of the Web-based utility

Step 1. Log in to the web configuration utility page and choose Administration > Reboot.

The Reboot page opens:

Step 2. To reboot the device, click the Reboot button.

A Confirm page appears:

Step 3. Click OK to continue with reboot.

A Progress Bar appears:

Step 4. The Login Page appears. Login with the saved administration credentials.

Other manuals for WAP371

3

Table of contents

Other Cisco Wireless Access Point manuals

Cisco

Cisco Aironet 1600 Series Quick reference guide

Cisco

Cisco Aironet 1830 Series User manual

Cisco

Cisco MR18 User manual

Cisco

Cisco Catalyst 9117AX Series User manual

Cisco

Cisco CISCO673-RF - 673 Router User manual

Cisco

Cisco Aironet 1400 Series User manual

Cisco

Cisco Catalyst 9136I Series Manual

Cisco

Cisco WAP131 Instruction Manual

Cisco

Cisco Meraki MR84 Manual

Cisco

Cisco AIR-CAP3502I-A-K9 User manual

Cisco

Cisco 1130AG - Aironet - Wireless Access Point User manual

Cisco

Cisco Aironet 3502P User manual

Cisco

Cisco Small Business Pro User manual

Cisco

Cisco aironet 1524SB Installation and operating instructions

Cisco

Cisco WAP121 User manual

Cisco

Cisco Meraki MR70 User manual

Cisco

Cisco Aironet 1850 Series User manual

Cisco

Cisco Wap581 Instruction Manual

Cisco

Cisco AIR-MP20B User manual

Cisco

Cisco Aironet 1250 Series User manual

Cisco

Cisco DPH650 User manual

Cisco

Cisco Meraki MR33 User manual

Cisco

Cisco aironet 2800 series Quick reference guide

Cisco

Cisco Aironet 1520 Series Manual

Popular Wireless Access Point manuals by other brands

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Quick installation guide

Ubiquiti

Ubiquiti NanoStation NSM2 quick start guide

Aruba

Aruba IAP-335 user guide

Advantek Networks

Advantek Networks AWN-AP-54MR user manual

IP-COM

IP-COM AP355 user guide

Buffalo

Buffalo AirStation WLA-L11G user manual

EnGenius

EnGenius EnStationACv2 user manual

D-Link

D-Link DAP-3662 Quick installation guide

xG Technology

xG Technology xMax CN1300 installation guide

Widelink

Widelink ezWave WAP-1100 Series user guide

Edimax

Edimax CAP1200 user manual

Ubiquiti

Ubiquiti LBE-5AC-Gen2 quick start guide

Aruba

Aruba AP-203R installation guide

LuXout Shades

LuXout Shades LUXSHADE MOTION manual

CreatComm

CreatComm TB5F user manual

SineDigital

SineDigital MW-1500AP(H) installation guide

TP-Link

TP-Link AP9650 V1 Quick installation guide

Draytek

Draytek VIGORAP 902 user guide