Cisco 8831 User manual

Perform a Hard Factory Reset on an 8831

Series IP Phone

Contents

Introduction

Reset the IP Phone

Factory Reset

Hard Factory Reset

Introduction

This document describes how to perform a hard factory reset on a Cisco 8831 Series IP phone,

which resets all of the network and security settings of the phone.

Reset the IP Phone

There are two methods that you can use in order to reset the Cisco IP phone: a factory reset, and

a hard factory reset.

Factory Reset

In order to perform a factory reset, navigate to Apps > Admin Settings > Reset Settings.

Choose one of these options in order to reset the phone to the factory default settings:

All

●

Network

●

Security

●

Hard Factory Reset

If the factory reset method that is described in the previous section is not possible, then a hard

reset can be attempted in order to achieve similar results. However, this method resets all of the

settings directly and does not provide the option to reset only the network or security settings.

Complete these steps in order to perform a hard factory reset of the phone:

Step 1. Unplug the Ethernet cable from the back side of the phone in order to power off the phone.

Note: If the phone is powered through a power brick, then power it off through the power

brick.

Step 2. Press and hold the Microphone (MIC) button on the front side of the phone, as shown in

the image.

Step 3. Continue to hold the MIC button and power on the phone (plug in the Ethernet cable or the

power brick). When the lights that are located on the left, right, and back sides of the phone

change from green to red, release the MIC button, as shown in the image.

Step 4. Press and hold the MIC button for approximately five seconds, and then release it. The

lights should blink red twice.

Step 5. Press and hold the MIC button. After approximately five seconds, the lights should begin to

blink red continuously, which confirms the factory reset of the phone.

Click this video in order to view the procedure:

Other manuals for 8831

12

Table of contents

Other Cisco IP Phone manuals

Cisco

Cisco 7945G - Unified IP Phone VoIP User manual

Cisco

Cisco 7931G - Unified IP Phone VoIP Instruction Manual

Cisco

Cisco 7962 User manual

Cisco

Cisco 7821 User manual

Cisco

Cisco Unified 6921 User manual

Cisco

Cisco 7962 User manual

Cisco

Cisco 8832 User manual

Cisco

Cisco Cisco 7940 User manual

Cisco

Cisco SPA504 User manual

Cisco

Cisco CP-7942G User manual

Cisco

Cisco DATAVOX 7941 User manual

Cisco

Cisco SPA942 - Cisco - IP Phone Instruction Manual

Cisco

Cisco 8941 User manual

Cisco

Cisco 7942 User manual

Cisco

Cisco 8831 User manual

Cisco

Cisco 8832 User manual

Cisco

Cisco 7906G - Unified IP Phone VoIP User manual

Cisco

Cisco 524SG - Unified IP Phone VoIP User manual

Cisco

Cisco Cisco Unified IP Phone 7960G User manual

Cisco

Cisco 8861 User manual

Cisco

Cisco Cisco Unified IP Phone 7960G User manual

Cisco

Cisco 7910G - IP Phone VoIP User manual

Cisco

Cisco Webex 840 User manual

Cisco

Cisco 7941G - Unified IP Phone VoIP User manual

Popular IP Phone manuals by other brands

Alcatel

Alcatel 4028 manual

Polycom

Polycom Polycom VVX 600 quick reference

Polycom

Polycom SoundPoint IP 450 datasheet

Polycom

Polycom SoundPoint IP 650 user guide

Proximus

Proximus Maestro 3016 IP quick start guide

Fanvil

Fanvil X4 user manual

Snom

Snom 320 quick start guide

Yealink

Yealink Yealink SIP-T46G Guide

Avaya

Avaya 4625SW user guide

Yealink

Yealink SIP-T52S quick start guide

Nortel

Nortel 1140E Getting started

Nexotek

Nexotek NT-P500 user manual

Avaya

Avaya Integral 5 R3.0 user guide

GE

GE 28320EE2 - Dect 6.0 InfoLink 2 user guide

Avaya

Avaya 4600 Series Administrator's guide

Mitel

Mitel MIVOICE OFFICE 400 6940 SIP user guide

Nortel

Nortel i2050 installation guide

Fiberme

Fiberme FAP260 Series user guide