CHIEF FSB-4394 User manual

Table of contents

Popular Rack & Stand manuals by other brands

Salamander

Salamander Acadia AC/W/L400/WH Assembly instructions

Fohhn

Fohhn VAT-09 Mounting instruction

ricoo

ricoo FS0522 quick start guide

AMSOIL

AMSOIL BMK-22 Installation and service instructions

Kargo Master

Kargo Master 48220 installation guide

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 installation instructions

ricoo

ricoo S1222 installation instructions

Ready-Set-Mount

Ready-Set-Mount RSMCM602 instruction manual

VidaBox

VidaBox VB MNT FFS2 installation guide

Welch Allyn

Welch Allyn 48960 Assembly instructions

Arkon

Arkon CM035-ST-2 installation instructions

PROEL

PROEL PLWIN60C user manual

Agilent Technologies

Agilent Technologies E2609B installation guide

Mustang

Mustang MV-ARM4 installation guide

Mounting Solutions

Mounting Solutions WRM-320 manual

Pyle

Pyle PMKSPAD1 manual

ShelterIt

ShelterIt 21208 installation instructions

SPL

SPL RackPack?4 1040 manual 

INSTALLATION INSTRUCTIONS

CHIEF MANUFACTURING INC. 8804-000328

1-800-582-6480 952-894-6280 FAX 952-894-6918 2005 Chief Manufacturing

8401 EAGLE CREEK PKWY, STE. 700 www.chiefmfg.com

SAVAGE, MINNESOTA 55378 USA 09/06

SMALL FLAT PANEL DISPLAY MOUNTING BRACKET

FSB-4394

(1) FSB Interface Bracket (4) Mounting Buttons

(4) 10-24 x .5 Button Head Cap Screw (4) .875 x .33 x .375 Nylon Washer

(4) M4 x 20mm Phillips Head Cap Screw (4) M4 x 25mm Phillips Head Cap Screw

(4) M4 x 40mm Phillips Head Cap Screw (1) 1/8 Allen Key

(4) M4 x 16mm Phillips Head Cap Screw (4) M4 Shoulder washers

(4) M4 Flat washers

BEFORE PROCEEDING: Unpack the carton, verify contents shown in Figure 1 and read

installation instructions completely. If you are missing any of the listed components, please

contact Customer Service at 1-800/582-6480.

Displays are Extremely Fragile.

NOTE: If installing screen onto a VESA 100mm X 100mm mount, skip to step 2 on Page 2 (mounting button

installation is not required).

1. Using #10-24 screws secure mounting button to bracket, with chamfered hole of mounting

button (larger surface) facing bracket (4 places) (see Figure 2 and Figure 3).

CAUTION!

Figure 1

Figure 2 Figure 3

2. Place nylon spacers on mounting holes, aligning hole pattern on brackets with pattern on

back of display (see Figure 3 and Figure 4).

3. Using the proper length of M4 screws (depending on screen), secure bracket to display. Do not over

tighten screws.

4. For Chief Q2™ mounts with 5” X 5” Mounting System - With the aid of another person,

lift the display up to the mount, align the mounting buttons on the plasma with the slots in the

mount, and set the screen into place. Lower safety latch on the Chief Mount to secure your

display, making sure latch is completely engaged.

5. For VESA 100mm X 100mm Mounting Systems - With the aid of another person, lift

display up to the mount, align threaded holes of interface bracket to mounting holes of

mount. Attach screen to mount (per mount instructions) with M4 screws provided with

mount.

6. For Chief Q2™ mounts with 100mm X 100mm Mounting System – Using the buttons

from the mount, secure the buttons with the 16mm M4 screws that come with bracket.

Follow the diagrams below for button mounting. With the aid of another person, lift the

display up to the mount, align the mounting buttons on the plasma with the slots in the

mount, and set the screen into place. Lower safety latch on the Chief Mount to secure your

display, making sure latch is completely engaged.

ALL COMPONENTS MUST BE SECURELY FASTENED TO A

STRUCTURAL MEMBER CAPABLE OF SUPPORTING 4 TIMES

THE COMBINED WEIGHT OF ALL COMPONENTS PLUS THE

EQUIPMENT BEING MOUNTED. IF IT CANNOT SUPPORT

THIS WEIGHT, THE STRUCTURE MUST BE REINFORCED.

THE MAXIMUM WEIGHT TO BE INSTALLED ON THE

BRACKET IS 45 POUNDS (20.41 KG).

WARNING

Figure 3 Figure 4

Figure 5 Figure 6