Champ SG300RFM User manual
SG300RFM
WIRELESS HAND HELD SCANNER
User Manual
1
We Value Your ID’s.
Notice
The manufacturer shall not be liable for technical or
editorial errors or omissions contained herein; nor for
incidental or consequential damages in connection with
the furnishing, performance or use of the publication.
EMEA
SCANTECH-ID BV
Amersfoortsestraat 124
3769 AN Soesterberg
The Netherlands
Tel:+31-33-4698400
Fax:+31-33-4650615
E-mail:[email protected]
www.scantech-id.com
CHINA
CHAMPTEK INCORPORATED
#901, No. 39, Wuzhong Rd., Shanghai
200235, China
Tel: +86-21-5489-0021
Fax: +86-21-5489-1833
HQ
CHAMPTEK INCORPORATED
5/F, No.2 Alley 2, Shin-Wei Lane,
Chung Cheng Rd., Hsin Tien City 231,
Taipei, Taiwan
Tel:+886-2-2219-2385
Fax:+886-2-2219-2387
E-mail:[email protected]
www.champtek.com
2
Content
1.Safety & Caution ....................................................................1
2.FCC Warning..........................................................................2
3.Introduction.............................................................................3
3.1 Product Description.....................................................3
3.2 Shipment Package......................................................3
3.3 Product Portfolio..........................................................3
3.4 Illustration....................................................................4
3.5 Cradle Installation To The Host Device.......................5
3.6 Cradle/Dongle Installation...........................................8
3.7 Indicator Status ...........................................................9
3.8 Environment Requirement ..........................................9
4.Specification.........................................................................10
1
Safety & Caution
1. Please read the following safety statement carefully.
2. Please preserve this user manual for reference sometime.
3. Before cleaning SG300RFM, the users must cut off all AC
power. Do not use liquid or spray type of detersive to clean
SG300RFM. Please use dampish cotton cloth to clean
SG300RFM.
4. The outlet must be set nearby SG300RFM for connecting
power easily.
5. Keep SG300RFM dry to avoid short circuit.
6. During installation, you must fix this equipment at solid table
to avoid damage caused by falling .
7. Before inserting power please ensure the voltage is healthy
to the equipment.
8. For safety please tie wire well and don’t put anything on the
wire.
9. If you don’t use this equipment for long time, please cut off
the power to avoid damage from surge power.
10. Don’t spray any liquid on this machine because it may cause
a fire or short circuit.
11. Please do not open the equipment. For safety only the
qualified serviceman can open the equipment.
12. If there are the following situations please contact with the
qualified serviceman to check this equipment.
(a) The damage of wire or pin of power supply.
(b) Some liquid infiltrate into the equipment.
(c) The equipment has been exposed to wet environment.
(d) The equipment can’t work well.
(e) The equipment has any obvious damage, making the
SG300RFM working abnormally.
13. Don’t storage SG300RFM at the temperature lower then
-20℃(-4°F) or higher then +70℃(158°F) to avoid any
damage.
1
2
FCC Warning
This equipment complies with the requirements in Part 15 of
FCC.
Any operation must complies with the conditions below:
(a) The equipment will not cause any severe interference.
(b) The equipment can avoid any interference from
environment.
Statement:
This product is classified as A class product.
In environment this product may cause some
interference. In this situation the user may do
something to avoid interference.
2
3
Introduction
3.1 Product Description
This wireless hand-held long-range CCD scanner features a
freedom of scanning without the limitation of cable. Thanks to
the user-friendly two-way communication, the operator will be
alarmed if the scanned result was not reached the receiving
Cradle. With the most advanced narrow-band RF technology,
this scanner can be operated at 15 Meters range(Open space)
and features one Cradle that supports multiple
scanners (Maximum 8 scanners). The receiving Cradle includes
RF receive module and Batteries charger.
SG300RFM packaging comes with complete package including
scanners (one or more, max to 8 scanners), receiver and power
supply. Be suitable for any location where a scanning for long
distance is needed. The shipment package has two types:
“Master” and “Salve” those packages as following:
(P.S: First time using please charge the battery for 8 hours.)
3.2 Shipment Package
A.Master：
a. Hand-held wireless scanner(Include Lithium-ion Battery)
b. Wireless receiving cradle
c. Power adaptor
d. User manual
e. Programming Menu
f. Cable(One of three interface:RS232, Keyboard, USB)
B.Slave：
a. Hand-held wireless scanner
b. Rechargeable Cradle*1 (only recharge function)
c. Power adaptor
3.3 Product Portfolio
Portfolio Product content
One to one 1 Master
One to two 1 Master + 1 Slave
One to four 1 Master + 3 Slave
If the package is incomplete or something broken, please
contact the local agent or sales representative immediately.
3
4
3.4 Illustration
Master
Slave
5
3.5 Cradle Installation To The Host Device
RS232
1. Turn off the host device.
2. Connect the 10-pin RJ45 male connector into the 10-pin
modular jack on the bottom of the cradle.
3. Connect the 9-pin D-type Female connector of the RS232
cable to the proper COM port of the host device.
4. Plug the external power supply into the power jack on the
bottom of the cradle.
5. Plug the power supply into the AC outlet. The red LED on
the rear of the cradle will stay on.
6. Turn on the host device.
6
Keyboard Wedge
1. Turn off the host device.
2. Connect the 10-pin RJ45 male connector into the 10-pin
modular jack on the bottom of the cradle.
3. Disconnect the keyboard from host.
4. Connect the “Y” ends of the communication cable to the
keyboard and keyboard port on the host device. If necessary,
use the male/female adapter cable supplied with the scanner
for the proper connections.
5. Plug the external power supply into the power jack on the
bottom of the cradle.
6. Plug the power supply into the AC outlet. The red LED on the
rear of the cradle will stay on.
7. Turn on the host device.
8. Establish communication between the scanner and cradle.
7
USB
1. Turn off the host device.
2. Connect the 10-pin RJ45 male connector into the 10-pin
modular jack on the bottom of the charger cradle.
3. Connect the USB A type connector to the USB port on the
host device.
4. Plug the power supply into the power jack on the bottom of
the cradle.
5. Plug the power supply into the AC outlet. The red LED on the
rear of the cradle will stay on.
6. Turn on the host device.
7. Establish communication between the scanner and cradle.
Table of contents
