Cecotec CLEANFRY LUXURY 4000 User manual

CLEANFRY LUXURY 4000

CLEANFRY LUXURY 4000 BLACK

CLEANFRY LUXURY 4000 DARK

4.2-litre digital fryer with elegant stainless steel design and 5 programmes.

Instruction manual

INDEX

1. Parts and components

2. Before use

3. Operation

4. Cleaning and maintenance

5. Technical specications

6. Disposal of old electrical appliances

7. Technical support and warranty

SAFETY INSTRUCTIONS

Read these instructions thoroughly before using the appliance.

Keep this instruction manual for future reference or new users.

-Make sure that the mains voltage matches the voltage

stated on the rating label of the appliance and that the wall

outlet is grounded.

-Check the power cord regularly for visible damage. If the

cord is damaged, it must be replaced by the ofcial Technical

Support Service of Cecotec in order to avoid any type of

danger.

-Always operate and store the appliance on a at, stable

surface.

-Make sure the product’s handles are properly assembled

and locked in place before use.

-This appliance is not intended to be operated by means of an

external timer or separate remote-control system.

-Always make sure the product’s inner pot is correctly

installed before operating the device.

-The surfaces of the appliance become hot during and after

operation. Do not touch while in use. Allow the appliance to

cool at least 30 minutes before handling and use only heat-

resistant tools. Do not use metal tools as they may

become hot.

-Always unplug the appliance while not in use, before

cleaning and before carrying out maintenance tasks.

-The electrical component is equipped with a safety cut-off,

which ensures that the heating element can only function

when the element is correctly placed on the fryer.

-In case of overheating, the thermal protective device will

switch off the fryer automatically. This device can be

reactivated again by pushing the button with a pointed

object (e.g., a ball pen) through a hole on the back of cord

storage compartment, signed with a word of “Restart”.

Before reactivation, disconnect it from mains and wait for

the system to cool down.

-The use of accessories or parts not provided or recommended

by Cecotec may result in re, electric shock or injuries to

persons and to the product.

-Do not let the cord hang overthe edge ofthe working surface

or countertop, and avoid it from touching hot surfaces.

-Do not use outdoors, near a gas or electric hob, in heated

ovens or near open ames.

-Extreme caution must be used when moving a fryer

containing hot oil or other hot liquids. Do not move the

appliance during use.

-Remove excess surface moisture fromfoods priorto cooking

to prevent heated oil from foaming out when food is added.

- Never leave the appliance unattended while in use.

-A re may occur if the appliance is covered or touches

ammable material, including curtains, draperies, walls,

and the like, when in operation. Do not place anything on top

of the appliance.

-Never pull on the power cord to disconnect the appliance

from the wall outlet; instead, pull on the plug.

-Ensure the oil is within the maximum and minimum marks in

the oil inner pot when in use.

-Never plug in the fryer before adding oil or fat, this could

cause damage to the product and cut power off.

-Supervise young children to make sure that they do not play

with the appliance.

-This appliance is for household use only, do not use it for

commercial or industrial purposes.

-Do not expose or immerse the cord, plug, electrical elements

or any non-removable part of the appliance in water or any

other liquid. Make sure your hands are dry before handling

the plug or switching on the appliance.

-This appliance cannot be used by children.

-This appliance cannot be used by children or people with

reduced physical, sensory or mental capabilities or lack of

experience and knowledge.

3. OPERATION

Note

This type of fryer may only be used with oil or liquid fat and is not suitable for use with solid fat.

Solid fat may contain water, which can cause hot fat to be sprayed out when heated.

1. Remove the lid from the deep fryer and take out the accessories.

2. Take the switch box out, pull on the power cord to connect it to the power supply. Replace

the switch box.

3. Fill the deep fryer with the desired amount of oil or fat. Make sure that it is lled not less

than minimum level and not higher than the maximum level as indicated on the inside of

the appliance. For best results, we recommend that you do not mix different kinds of oil

together.

4. Choose the temperature, which is suitable for what you are frying. Consult the temperature

table.

5. Use the handle to place the basket in the deep fryer.

6. Place the food to be deep red into the basket.

Note

For best results, put dry food into the basket.

7. The fryer will beep when the temperature you have selected has been reached. Always

wait until the selected temperature has been reached. To keep the oil at the selected

temperature, the thermostat repeatedly goes on and off.

8. Lower the basket into the oil slowly to prevent excessive bubbling.

9. Raise the basket again when the frying time has elapsed.

10. Remove the plug from the outlet.

11. Rinse the handle and the basket after use, and dry thoroughly.

12. Once the deep fryer has completely cooled off, empty the oil in the inner pot, clean it and

replace it. Put the basket in the appliance and store it. Store the deep fryer, with the lid

close, in a dark, dry place.

Frying tips

Use a maximum of 200 g of French fries per litre of oil.

With deepfreeze products, use a maximum of 100 g because they quickly cool off. Shake

deepfreeze products above the sink to remove excess ice.

When using fries made from fresh potatoes: dry the fries after washing so that no water will

go into the oil.

Buttons and light indicators

Power button: Light & on/off/conrmation

Mode button: Light & mode setting

Time button: Light & time setting

Temperature button: Light & temperature setting

Standby mode

The deep fryer will emit a single “beep” for 1 s and the display will show “P001”. The Mode

button light will also ash.

Mode selection

1. Press the Mode button in Standby mode to select the desired mode. The display will show

programmes 1 to 5 (P001-P005).

Press it again and the display will show “P001”.

Note

Each mode has a matching preset time and temperature, please check the section “Preset

Time and Temperature”.

2. Press the Temperature button in Standby mode. The display will show the preset

temperature and the temperature button light will turn on.

Press the Temperature button once to increase the temperature by 5 ºC.

Use the Temperature button to adjust the temperature from 110 ºC to 190 ºC.

When the temperature selection reaches 190 ºC, press the Temperature button again and

the temperature will revert back to 110 ºC.

3. Press the Time button in Standby mode and the display will show the preset time and the

corresponding time button light will turn on.

Press the Time button once to increase the time by 1 min.

Use the Time button to adjust the time from 1 min to 99 min. When the time selection

reaches 99 min, press the button again and it will revert back to 1 min.

Shape

NN:XX (N refers to min, X refers to no display).

Throughout the whole process, the digital display will show 0.5 s which means the appliance is

in operation. 0.5 s will ash on the display indicating that it has stopped operation.

Heating mode

1. After selecting a mode, press the ON/OFF button and the display will show the current oil

temperature. The buttons will light up. The device will start the heating process.

2. During the heating process, press the Mode button. Notice that there is no change on the

display or the setting. Press the Time button and the display will show the preset time.

Press the Temperature button to show the preset temperature.

3. During this process, the buttons will remain on and the display will not ash.

Note

The display will show the current temperature for 5 s without you having to press any button.

Waiting mode

Once the oil reaches the preset temperature then the deep fryer will “beep” (beep 0.3 s, stop

0.3 s). The panel will display the current temperature. Should the deep fryer be left without any

selection for 1 min then it will automatically switch to standby mode.

Frying mode

1. After entering the Waiting mode, press the ON/OFF button. The deep fryer will stop

beeping. The set time will show up on the display. The ready light will turn on.

Time format

N:XX or NN:nn (N refers to the remaining minutes, n refers to the remaining seconds, X refers

to no display). Time precision requirements ±3 %.

2. During the frying process, press the Time button and the display will show the preset time.

The time button will light up. Press the Temperature button and the display will show the

preset temperature. Should the deep fryer be left without any selection for 5 s then it will

automatically switch to the countdown timer.

3. Once the fryer reaches the required preset temperature, the heating element will switch

off. If the oil temperature drops to lower than the preset temperature 7±3 °C, the heating

element will automatically turn on again to reach the required preset temperature. The

display will show the countdown timer.

4. Once the deep fryer has reached the end of its preset time, it will emit ten beeps (beep 2 s,

stop 1 s). It will stop heating and then enter Standby mode.

5. Press the ON/OFF button when the fryer is working, and the deep fryer will stop the heating

process. The display will show the default code and switch to setting mode.

preset programs

MODE TEMP (°C ) TIME (Min.)

P001 Frozen French fries 190 7

P002 Fresh potatoes 190 5 min 30 s

P003 Nuggets 190 3

P004 Chicken wings 190 12

P005 Croquettes 190 5

Note

Cooking times andtemperatures are approximate and mayvarydepending on different factors.

4. CLEANING AND MAINTENANCE

Replacing oil

- Make sure that the deep fryer and the oil have totally cooled off before replacing the oil.

- Unplug the cord from the power supply.

-Replace the oil regularly. This is denitely necessary if the oil becomes dark or takes on a

different odour. In any case, replace the oil once after every 10 times’ usage.

- Replace the oil all at once; do not mix old and new oil.

-Do not discard oil in the normal rubbish bin, follow the guidelines of the municipal waste

collector in your area.

General cleaning

- Allow the device to cool completely down before handling, cleaning or repairing it.

- Always unplug the device before cleaning it.

-If the deep fryer is not used regularly, it is recommended to store the oil or liquid fat used,

after cooling, in a container preferably in the fridge or some other cool place. Remember

to strain oil rst.

-Empty the fryer and clean the inner part of oil inner pot with a paper towel, then wipe with

a wet cloth dipped in soapy water. Wipe with a damp cloth and allow it to dry.

-Never immerse the oil inner pot (with power cord) in water and do not clean these parts

under running water.

-Clean regularly the outer part of the fryer with damp cloth and dry it with a soft and clean

towel.

- Do not use abrasive detergents.

-Clean the basket, the lter, the inner pot, and the handle in warm soapy water or in the

dishwasher. Dry thoroughly before using again.

Note

If the basket or the oil pot are washed frequently in the dishwasher, they could present some

scratched or damages.

-When replacing the oil, you can also clean the inside of the deep fryer. Empty the fryer and

clean the inner part of oil inner pot with a paper towel, then wipe with a wet cloth dipped

in soapy water. Wipe with a damp cloth and allow it to dry.

-All components, with the exception of the electrical parts, may be cleaned in warm soapy

water. Dry it thoroughly before using it.

- Store the appliance in a dry, well-ventilated and safe place, out of reach of children.

- Store it in its original package when not using for a long time to avoid soiling.

-There are no user serviceable parts in your fryer. Do not attempt to repair it by yourself.

5. TECHNICAL SPECIFICATIONS

Product reference: 04302/4303/4312

Model: Cleanfry Luxury 4000/ 4000 Black / 4000 Dark

3000 W/AC 2740-3270 W 220-240 V 50-60 Hz

Capacity: 4,2 L

Made in China | Designed in Spain

6. DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European directive 2012/19/EU on Waste Electrical and Electronic

Equipment (WEEE), species that old household electrical appliances

must not be disposed of with the normal unsorted municipal waste. Old

appliances must be collected separately, in order to optimise the recovery

and recycling of the materials they contain and reduce the impact on

human health and the environment.

The crossed out “wheeled bin” symbol on the product reminds you of your

obligation to dispose of the appliance correctly.

Consumers must contact their local authorities or retailer for information concerning the

correct disposal of old appliances and/or their batteries.

Other manuals for CLEANFRY LUXURY 4000

This manual suits for next models

Table of contents

Other cecotec Fryer manuals

cecotec

cecotec CECOFRY ADVANCE INOX User manual

cecotec

cecotec CECOFRY RAIN PACK User manual

cecotec

cecotec CECOFRY PIXEL 2500 User manual

cecotec

cecotec CECOFRY ADVANCE PRECISION User manual

cecotec

cecotec CECOFRY EXPERIENCE WINDOW 6000 User manual

cecotec

cecotec CECOFRY FULL INOX 5500 User manual

cecotec

cecotec CLEANFRY LUXURY 4000 User manual

cecotec

cecotec CleanFry 3 L Full Inox User manual

cecotec

cecotec BAKE&FRY 1400 TOUCH STEEL User manual

cecotec

cecotec CECOFRY FULL INOXBLACK 5500 PRO User manual

cecotec

cecotec CECOFRY FULL INOXBLACK 5500 CONNECTED PACK User manual

cecotec

cecotec CECOFRY DUAL 9000 User manual

cecotec

cecotec CECOFRY COMPACT 2000 User manual

cecotec

cecotec CECOFRY FULL INOXBLACK 5500 CONNECTED PACK User manual

cecotec

cecotec CECOFRY COMPACT 2000 User manual

cecotec

cecotec CECOFRY BOMBASTIK 6000 User manual

cecotec

cecotec CECOFRY FIREDOME 8000 PRO User manual

cecotec

cecotec CECOFRY ADVANCE PRECISION User manual

cecotec

cecotec CleanFry Infinity 3000 User manual

cecotec

cecotec 03315 User manual

cecotec

cecotec CECOFRY DUOHEAT 6000 User manual

cecotec

cecotec CECOFRY ADVANCE DOUBLE User manual

cecotec

cecotec CECOFRY ANTIQUE 5000 User manual

cecotec

cecotec CECOFRY EXPERIENCE WINDOW WHITE 6000 User manual

Popular Fryer manuals by other brands

Innsky

Innsky 55SA1US user manual

Falcon

Falcon G350/11 Installation and servicing instructions

GoWISE USA

GoWISE USA GW22612 instruction manual

Wolf

Wolf IF15/S Specification sheet

Electrolux

Electrolux Thermetic 9CHG583284 Operating and safety instructions

Gourmia

Gourmia GAF799 user manual

DeLonghi

DeLonghi D677UX Instructions for use

SEVERIN

SEVERIN DEEP FRYER - Dimensions

Toastmaster

Toastmaster TMFG18-NAT Installation and operation instructions

Domo

Domo DO465FR Instruction booklet

Henny Penny

Henny Penny PFG-691 Technical manual

Farberware

Farberware FBW FT 43721 B manual

GERMANICA

GERMANICA GEAF5L3LD instruction manual

Roller Grill

Roller Grill MF 120 R Instructions for use and installation

Philips

Philips HD9211 user manual

Linea 2000

Linea 2000 Domo DO536FR Instruction booklet

Lakeland

Lakeland 31796 Instruction booklet

Dash

Dash Tasti-Crisp DFAF755 user manual