Casio V-R100 User manual

SERVICE MANUAL

Ver. 3 : Aug. 2013

V-R100

(EX-841)

OCT. 2011

V-R100

CONTENTS

1. SPECIFICATIONS .......................................................................................................... 1

2. DISASSEMBLY............................................................................................................... 5

3. DIAGNOSTIC OPERATION.......................................................................................... 25

4. ERROR CODE LIST ..................................................................................................... 37

5. HARDWARE ................................................................................................................. 38

6. EXPLODED VIEW / PARTS LIST................................................................................. 43

V-R100

CAUTION

LAN CONNECTOR

Ethernet (LAN) Connector:

Not used to a telecommunication network

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS.

CAUTION

“DO NOT INCINERATOR DISASSEMBLE; MAY EXPLODE OR RELEASE

TOXIC MATERIALS. DO NOT SHORT CIRCUIT; MAY CAUSE BURNS.”

CAUTION

TO AVOID DATE AND TIME TO BE INITIALIZED CAUSED BY LOW

BATTERY, CHARGE THE BATTERY AT LEAST SIX HOURS.

1. Before installation, initialize the terminal and leave it for more than six hours with the power on (Power

lamp should be on).

2. If the terminal is left for a long period (more than 30 days), the date and the time may be initialized. In

such a case, reset the date and the time and leave the unit for more than six hours with the power on

(Power lamp should be on).

V-R100

– 1 –

1. SPECIFICATIONS

1-1. Main Specications

Main Display Type 10.4 inch SVGA Color TFT LCD

Resolution 800 × 600

Color *1Max. 16,777,216

Backlight White LED

Others Electric motor-driven tilt function (15 ° to 75 °)

Touch Panel Type 4-wired resistive

Size 10.4 inch

Sub Display Resolution 32 × 160 (20 characters, 2 lines)

Backlight 2 colors (emerald green, white)

Printer Type Thermal printer

Speed *1Max. 49 mm/sec.

Roll paper Thermal paper, width: 79 to 80 mm Diameter: 80 mm (Max.)

Cutter Auto cutter

Memory Protection Battery Ni-MH rechargeable battery

Backup time Approx. 30 days (Temperature: 25 °C)

Battery life 5 years (Temperature: 25 °C)

Charging time 6 hours when fully charged (Temperature: 25 °C)

Power Supply and

Consumption

120 V AC ± 10 V 50/60 Hz 0.7 A

230 V AC ± 10 V 50/60 Hz 0.38 A

220 V to 240 V AC ±10 V 50/60 Hz 0.4 A

External Interface Front Dallas key (factory option)

Side SD/SDHC memory card slot × 1

(SD: MAX. 2 GB, SDHC: MAX. 32 GB),

USB port × 1

Back COM port × 3, LAN port × 1

Water Drop Proof IPX2 level (compliant with IEC60529 standard) (main display only)

Operating

Temperature/Humidity

0 °C to 40 °C 20 % to 85 % RH

Dimension 229 mm (H) × 395 mm (w) × 237 mm (D)

(with maximum tilt angle) (Not including protruding parts)

Weight Approx. 5.0 kg

Accessories User’s manual, 1 pc

Dust cover, 1 pc

80 mm roll paper (for trial), 1 pc

Multi purpose tray

Ferrite core (used when connecting USB hub)

Screw (for xing connector cover)

*1: The values in the above list are the characteristic of the hardware. The actual color and/or the

printing speed depend on the installed software.

V-R100

– 2 –

1-2. System overview and I/O outlets

[ Front ]

[ Rear ][ Side ]

16 15

22 21 20 19

1Printer cover br Power switch

2Auto cutter unit bs Tilt switch

3Platen arm bt COM1 port

4Roll paper ck COM2 port

5Main LCD display with touch screen cl COM3 port

6Power lamp cm LAN port

7Side cover cn Dallas key

8USB cover

9Main display OFF/ON switch

bk Card cover

bl SD memory card slot

bm USB port

bn Sub display

bo Connecter cover

bp Power cord

bq Drawer cable

V-R100

– 3 –

DISP-SW

INIT-SW

Reset-SW

SD-SLOT

USB-SLOT

Boot-SW

eMMC Boot

SD Boot

DISP-SW : Turns the main display on and off.

Menu will be shown when it is pressed continuously.

INIT-SW : Functions as [HOME] button.

[Power OFF, Restart] menu will be displayed when pressed continously.

Boot-SW : Switches the booting method.

Reset-SW: Turns the unit compulsively.

Note: The built-in clock will be reset and set as January 1, 2000.

Note: As the Boot-SW and Reset-SW are located inside, use thin pin to turn them on or off.

V-R100

– 4 –

1-3. Option List

DEVICE NAME MODEL SPECIFICATION NOTE

Slip printer SP-1300

Slip printer cable PRT-CB-8C EX-PRT-CB-8C Length 1.5 m

Remote printer UP-400 EX-PRT-UNIT-10

Remote printer UP-370 EX-PRT-UNIT-11

PC cable PRL-CB-2 EX-PRL-CB-2

1-4. Drawer List

Type Model Specication EU US/

CANADA UK DI TAIWAN

M DL-2814 D-26P1C-B84RM-4   

M DL-2815 D-26P1C-B64SRM-4  

M DL-2436 D-26P1C-B65SRM-4 

L DL-3624 D-11P1H-B65SR-4 

L DL-3625 D-11P1H-B65R-4 

1-5. Duration of Life

Main display OFF/ON switch Two hundred thousand times

INIT SW Ten thousand times

Main display Panel life: Fifty thousand hours

Backlight life: Thirty thousand hours

Rear display Backlight life: Twenty thousand hours

Open/close of drawer One million times

Insertion-extraction of SD card Five thousand times

Touch panel One million times

V-R100

– 5 –

2. DISASSEMBLY

2-1. Cautions

* Please note that the illustrations may differ from actual product due to design changes.

* Please make a back-up copy of the clients’ data before disassembling.

* There are several kinds of screws. Be sure to use the correct type of screws when reassembling. It is

advisable to sort the screws as shown in the below after removing them.

* When disconnecting a connector, do not pull it by its cable. Be sure to hold the connector part.

* Internal battery:

• Do not disassemble or short-circuit the battery.

• Do not place the battery near a heat source or expose it to direct ame or heat.

• Place the battery with its (+) and (-) terminals in the correct orientation.

* When assembling, be sure that it is free of dust and other foreign matters. Pay special attention when

replacing the touch panel and LCD.

V-R100

– 6 –

2-2. Disassembling

See the owchart below for the order of disassembling main parts.

A. CASE

B. E840-IOC PCB / E840-COM PCB / E840-ETH-UNIT / DRAWER CABLE

C. POWER-SW-ASSY / E840-E63 PCB

D. AC-ADAPTOR / GEAR-BOX-ASSY

E. SHAFT-SUBASSY / PS-COVER

J. E840-E61 PCB / E840-E62 PCB / BAT-BOX-SUBASSY

K. E840-1 PCB

L. F-CASE-ASSY (TOUCH-PANEL-ASSY)

F. PR-ASSY / PRINTER / E840-PR PCB / E840-E64 PCB

G. DP-CASE-ASSY

I. R-CASE-ASSY / HNG-CHASSIS

H. DISPLAY-ASSY / LCD-STAND

V-R100

– 7 –

A. CASE

A-1. Remove I/F-COVER and POP-COVER.

Caution for disassembly: If an optional screw is xed on the I/F-COVER, remove it rst.

Caution for assembly: Be cautious with the direction of PS-LID.

Optional screw

POP-COVER

I/F-COVER

A-2. Tilt up the main display then remove PS-LID.

PS-LID

Other manuals for V-R100

Table of contents

Other Casio Cash Register manuals

Popular Cash Register manuals by other brands

Royal

Royal 480nt operating manual

Olivetti

Olivetti ECR 8200 S user guide

TEC

TEC TEC FS-3600 owner's manual

Integrated System Laboratory

Integrated System Laboratory ISL 4006 user manual

Sam4s

Sam4s ER-380 Operation and program manual

Sharp

Sharp XE-A206 Guía de inicio Rápido

Samsung

Samsung ER 5215 Operator's manual

Toast

Toast Toast Quick setup guide

Sharp

Sharp XE-A130 Bedienungsanleitung

TEC

TEC MA-600-1 series owner's manual

QUORION

QUORION CR 1200 user manual

Olivetti

Olivetti ECR 7700 LD eco Plus user guide

Sharp

Sharp XE-A137-WH Operation Basic user manual

Sharp

Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo... instruction manual

TEC

TEC TEC MA-1060 owner's manual

ELCOM

ELCOM Euro-2100TE user manual

American Changer

American Changer CLASSIC Series Operation manual

Sam4s

Sam4s ER-180 Operation manual