Casablanca 99050 User manual

Compatible with:

2xxxx Types A - Z

51000-58999 fan series

59500-59999 fan series

Select Casablanca fans

Models 99050, 99051,99052, 99053, 99054, 99055

M8505-01 • 11/21/12

Decorative Low Prole

Integrated Kit

Decorative Low Prole

Integrated Kit

Installation Manual

M8505-01 • 11/21/12 M8505-01 • 11/21/12

1.888.830.1326 1.888.830.1326

2 3

If your fan’s switch housing cap resembles

this one, remove the switch housing

screws using a Phillips head screwdriver.

Then remove the plug button using a

standard screwdriver. Then follow the

TYPE-B ASSEMBLY INSTRUCTIONS on

pages 6-7.

If your fan’s switch housing cap resembles

this one, remove the whole switch

housing by removing the switch housing

assembly screws with a Phillips head

screwdriver.Remove the plug button.

Then follow the TYPE-C ASSEMBLY

INSTRUCTIONS on pages 8-9.

If your fan’s switch housing cap resembles

this one, remove the cap screws with a

Phillips head screwdriver. Then follow the

TYPE-A ASSEMBLY INSTRUCTIONS on

pages 4-5.

Switch

Housing

Cap

Screw

WHICH ASSEMBLY METHOD WILL I USE?

Switch

Housing

Cap

Switch

Housing

Screw

Switch

Housing

Screw

Switch

Housing

Screw

Plug

Button Plug

Button

Your light kit is compatible with most ceiling fans. The light kit will attach to the fan’s

switch housing. Begin on page 3 where you will choose the type of switch housing that

most closely resembles the one on your fan. From there, you will be directed to the set of

assembly instructions that are appropriate for installing the light kit to your fan.

Read entire installation instructions carefully before

beginning installation and save these instructions.

BEFORE YOU BEGIN

Switch

Housing

Choose one of the four images below that most closely resembles the switch

housing on your fan; then follow the instructions under the image.

READ AND SAVE THESE INSTRUCTIONS

This product conforms to UL Standard 507.

WARNINGS

w.1 - To reduce the risk of re, electrical shock, or personal injury, mount fan directly from building

structure and/or an outlet box marked acceptable for fan support of 70 lbs (31.8 kg) and use the

mounting screws provided with the outlet box.

w.2 - To avoid possible electrical shock, before installing or servicing your fan, disconnect the power by

turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock

the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the

service panel.

c.1 - All wiring must be in accordance with national and local electrical codes ANSI/NFPA 70. If you are

unfamiliar with wiring, use a qualied electrician.

CAUTIONS

If your fan’s switch housing cap resembles

this one, remove the whole switch

housing by removing the switch housing

screws with a Phillips head screwdriver.

Remove the two cap screws from the

inside of the switch housing. Reinstall

the switch housing. Tighten the switch

housing screws.Then follow the TYPE-A

ASSEMBLY INSTRUCTIONS on pages 4-5.

M8505-01 • 11/21/12 M8505-01 • 11/21/12

1.888.830.1326 1.888.830.1326

4 5

TYPE-A ASSEMBLY INSTRUCTIONS

Partially install the two mounting screws

into the bottom of the lower switch housing.

Mounting

Screw

Wire

Connector

Switch

Housing

Lift the light kit up to meet the

lower switch housing. Wrap keyhole

slots around the screws and twist

counterclockwise. Tighten screws.

Keyhole

Slots

Mounting

Screw

Using the single pin connectors, connect

the black or blue wire from the fan to the

black wire from the light kit. Connect the

white wire from the fan to the white wire

from the light kit.

TYPE-A ASSEMBLY INSTRUCTIONS (CONTINUED)

If your fan does not have pin connectors

on the wires coming from the switch

housing, install the wiring harness

provided. Using the provided wire

connectors connect the white wire from

the fan to the white wire from the wire

harness and connect the black or blue

wire from the fan to the black wire from

the wire harness.

Do not allow the light kit to hang

only by the wire connections!”

After the light kit is mounted to the fan, feed

the pull chains from the fan’s switch housing

and the light kit through the grommeted

holes in the base of the light kit. Extension

chains are provided, if necessary. Both pull

chains must line up with the grommeted

holes to operate properly.

Grommeted

Hole

Pull Chain

Indentation

Tab

Installing the bulb - Install a bulb into each

of the sockets. When necessary, replace

with bulbs of the same type and wattage.

Socket

Installing the Pull chain pendant -

Attach the pull chain pendant to the

end of the short chains coming from the

switch housing and the light kit. Turn

power on. Your installation is complete.

Installing the globe (sold separately)- Position the

indentations in the outer rim of the globe so that they

line up with the tabs on the inside surface of the light

xture rim. Carefully lift the globe up inside the light

xture as far as it will go. Rotate the globe in a clockwise

direction until it is held tightly in place by the four tabs.

M8505-01 • 11/21/12 M8505-01 • 11/21/12

1.888.830.1326 1.888.830.1326

6 7

After the light kit is mounted to the fan, feed

the pull chains from the fan’s switch housing

and the light kit through the grommeted

holes in the base of the light kit. Extension

chains are provided, if necessary. Both pull

chains must line up with the grommeted

holes to operate properly.

Grommeted

Hole

Pull Chain

Using the single pin connectors, connect

the black or blue wire from the fan to the

black wire from the light kit. Connect the

white wire from the fan to the white wire

from the light kit.

TYPE-B ASSEMBLY INSTRUCTIONS TYPE-B ASSEMBLY INSTRUCTIONS (CONTINUED)

Lift the light kit assembly up so that the

screw holes in the lower switch housing

line up with the holes in the upper switch

housing. Install the switch housing

screws and tighten securely.

Feed the wires through the center hole in

the switch housing, the washer, and the nut.

Then install the switch housing by twisting

clockwise onto the threaded rod. Install

the washer and nut onto threaded rod and

tighten securely.

1 2

Wire

Connector

Switch

Housing

Switch

Housing

Screw

If your fan does not have pin connectors

on the wires coming from the switch

housing, install the wiring harness

provided. Using the provided wire

connectors connect the white wire from

the fan to the white wire from the wire

harness and connect the black or blue

wire from the fan to the black wire from

the wire harness.

Indentation

Tab

Installing the bulb - Install a bulb into each

of the sockets. When necessary, replace

with bulbs of the same type and wattage.

Socket

Installing the Pull chain pendant -

Attach the pull chain pendant to the

end of the short chains coming from the

switch housing and the light kit. Turn

power on. Your installation is complete.

Do not allow the light kit to hang

only by the wire connections!”

Installing the globe (sold separately)- Position the

indentations in the outer rim of the globe so that they

line up with the tabs on the inside surface of the light

xture rim. Carefully lift the globe up inside the light

xture as far as it will go. Rotate the globe in a clockwise

direction until it is held tightly in place by the four tabs.

M8505-01 • 11/21/12 M8505-01 • 11/21/12

1.888.830.1326 1.888.830.1326

8 9

TYPE-C ASSEMBLY INSTRUCTIONS (CONTINUED)TYPE-C ASSEMBLY INSTRUCTIONS

Feed the wires through the center hole in

the switch housing. Then using the single

pin connectors, connect the black or blue

wire from the fan to the black wire from

the light kit. Connect the white wire from

the fan to the white wire from the light kit.

Lift the lower switch housing up so

that the screw holes line up with the

holes in the upper switch housing.

Install the switch housing screws and

tighten securely.

Lift the light kit up, tucking the wires into

the hole in the switch housing. Install the

center stem of the light kit into the lower

switch housing by turning the threaded

rod clockwise into the threaded hole.

Continue turning until tight.

Upper

Switch

Housing

Threaded

Rod

Lower

Switch

Housing

Switch

Housing

Screw

Wire

Connector

Switch

Housing

If your fan does not have pin connectors

on the wires coming from the switch

housing, install the wiring harness

provided. Using the provided wire

connectors connect the white wire from

the fan to the white wire from the wire

harness and connect the black or blue

wire from the fan to the black wire from

the wire harness.

Do not allow the light kit to hang

only by the wire connections!”

After the light kit is mounted to the

fan, feed the pull chains from the fan’s

switch housing and the light kit through

the grommeted holes in the base of the

light kit. Extension chains are provided,

if necessary. Both pull chains must

line up with the grommeted holes to

operate properly.

Grommeted

Hole

Pull Chain

Indentation

Tab

Installing the bulb - Install a bulb into each

of the sockets. When necessary, replace

with bulbs of the same type and wattage.

Socket

Installing the Pull chain pendant -

Attach the pull chain pendant to the

end of the short chains coming from the

switch housing and the light kit. Turn

power on. Your installation is complete.

Installing the globe (sold separately)- Position the

indentations in the outer rim of the globe so that they

line up with the tabs on the inside surface of the light

xture rim. Carefully lift the globe up inside the light

xture as far as it will go. Rotate the globe in a clockwise

direction until it is held tightly in place by the four tabs.

M8505-01 • 11/21/12

1.888.830.1326

ONE YEAR WARRANTY

This product is warranted to the original purchaser by Casablanca Fan Company/

Hunter Fan Company against defects in material and workmanship for one (1)

year from date of purchase. During the warranty period, we will repair or, at our

option, replace a defective product at no charge. For information on how to obtain

service, contact the Casablanca/Hunter Service Department by calling our toll-

free number at 888-830-1326. Damage to the product caused by mishandling,

improper installation or modication is not covered by this warranty. This warranty

is given in lieu of all other warranties expressed or implied. Some states do not allow

limitations of time on an implied warranty, therefore the above limitations may not

apply in every case. This warranty states specic legal rights which may vary from

state to state.

TROUBLESHOOTING

Lights don’t come on.

• Make sure that the bulbs are properly installed.

• Make sure power switch is on.

• Pull the pull chain to make sure it is on.

• Check the circuit breaker to ensure the power is turned on.

• Check the pin connections in the light kit.

• Refer to the fan manual for locating the fan’s wiring. Verify that the light and power

wires are correctly connected to the ceiling and the light kit.

If you have problems installing or operating your light kit, do not return this product

to the dealer. Call our Consumer Affairs Hotline.

888-830-1326

Monday through Friday

8:00 am to 4:30 pm Central

This manual suits for next models

Table of contents

Other Casablanca Fan manuals

Casablanca

Casablanca Holliston C31UxxZ User manual

Casablanca

Casablanca ALESSANDRIA User manual

Casablanca

Casablanca WHITMAN User manual

Casablanca

Casablanca Isotope User manual

Casablanca

Casablanca La FLeur User manual

Casablanca

Casablanca 54032 User manual

Casablanca

Casablanca Compass Point 54010 User manual

Casablanca

Casablanca CEILING FAN User manual

Casablanca

Casablanca 59285 User manual

Casablanca

Casablanca 59081 Instruction manual

Casablanca

Casablanca Utopian 54035 User manual

Casablanca

Casablanca Caneel Bay Instruction manual

Casablanca

Casablanca Panama Halo User manual

Casablanca

Casablanca WHITMAN Instruction manual

Casablanca

Casablanca Perseus Service manual

Casablanca

Casablanca Metropolitan User manual

Casablanca

Casablanca Adelaide 54116 User manual

Casablanca

Casablanca Exteriors 90192 User manual

Casablanca

Casablanca Marrakesh User manual

Casablanca

Casablanca Durant 54103 User manual

Casablanca

Casablanca Le Grande User manual

Casablanca

Casablanca Mission User manual

Casablanca

Casablanca Stealth Instruction manual

Casablanca

Casablanca Star User manual

Popular Fan manuals by other brands

ELTA FANS

ELTA FANS H03VV-F installation guide

Hunter

Hunter 20714 Owner's guide and installation manual

Emerson

Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter

Hunter Caraway Owner's guide and installation manual

Panasonic

Panasonic FV-15NLFS1 Service manual

Kompernass

Kompernass KH 1150 operating instructions

VES

VES FALA100/12V/TR Original instructions

Vertiv

Vertiv Liebert DCD user manual

Westinghouse

Westinghouse GFP Series owner's manual

Venmar

Venmar KUBIX HRV PLUS Series user guide

Maico

Maico ECR 31 installation instructions

Sonnenkonig

Sonnenkonig Dinky instruction manual

S&P

S&P ECOWATT HXBR manual

Wider

Wider IMP03369BH instruction manual

Panasonic

Panasonic F-60DHN Operating and installation instructions

Hinkley

Hinkley HIGHLAND instruction manual

Broan

Broan 766BN installation guide

Premium

Premium PFS16022 Use manual