Casablanca 55082 User manual
www.CasablancaFanCo.com 1.888.227.2178
Table of Contents
PAGE
10
Wiring
PAGE
7
Downrod
PAGE
4
Preparation
Canopy
PAGE
11
PAGE
5
Mounting Options
PAGE
6
Ceiling Bracket
Ladder
PAGE
3
Tools Needed
30 inches
7 feet
PAGE
2
What to Expect with
Your Installation
1
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
PAGE
12
Blades
PAGE
14
Switch Housing Troubleshooting
?
?
PAGE
20
?
?
?
PAGE
15
Wall Control
www.CasablancaFanCo.com 1.888.227.2178
2
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
What to Expect with Your Installation
Know your wiring
If you are unfamiliar
with wiring, use a
qualied electrician.
You may need a
friend to help you.
Check box to see
fan weight
Assess location
30 inches
from blade tip to
nearest wall or
obstruction 7 feet
from bottom
edge of blade
to the oor
Select a downrod length
w.1 - To reduce the risk of re, electrical shock, or personal
injury, mount fan directly from building structure and/or an
outlet box marked acceptable for fan support of 70 lbs (31.8 kg)
and use the mounting screws provided with the outlet box.
w.2 - To avoid possible electrical shock, before installing or
servicing your fan, disconnect the power by turning off the
circuit breakers to the outlet box and associated wall switch
location. If you cannot lock the circuit breakers in the off
position, securely fasten a prominent warning device, such as a
tag, to the service panel.
w.3 - To reduce the risk of re, electrical shock, or motor damage,
use only Casablanca Solid State Speed Controls.
w.4 - To reduce the risk of personal injury, do not bend the blade
brackets when installing the blade brackets, balancing the blades,
or cleaning the fan. Do not insert foreign objects in between
rotating fan blades.
c.1 - All wiring must be in accordance with national and local
electrical codes ANSI/NFPA 70. If you are unfamiliar with wiring,
use a qualied electrician.
c.2 - Use only Casablanca replacement parts.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and if not
installed and used in accordance with the instructions may cause
harmful interference to radio communications.
Assess ceiling angle
Read and Save These Instructions
This product conforms to UL Standard 507.
WARNINGS
CAUTIONS
Must be able to
secure the fan to
building structure or
fan-rated outlet box
1
2
3
Standard Downrod
for ceilings 8-10 feet high
Shorter Downrod
for fans installed close to ceiling
Longer Downrod
for ceilings 10 feet or higher
Ceiling angles greater
than 34° will require an
Angled Mounting Kit.
See page 4 for details.
www.CasablancaFanCo.com 1.888.227.2178
3
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
Tools Needed
Ladder
Power Drill
(optional)
9/64” Drill Bit
(optional)
Screwdrivers
Pliers Wire Strippers
If mounting to a support structure, you
will also need these tools.
Do not discard the hardware
bags or mix parts from different
bags. Make note of the symbol
printed on each hardware
bag. The symbols can be used
to identify the appropriate
hardware for each step.
www.CasablancaFanCo.com 1.888.227.2178
Preparation
D
I
S
C
A
R
D
K
E
E
P
!
Remove the shipping blocks from the
motor. Save the screws. They will be
needed for blade iron installation.
Note: Some fans will have a shipping
ring instead of shipping blocks. Please
remove the ring and save the screws.
Time Saver Tip: Get a helper
to insert grommets, found in
the hardware bag, into the
blades while you’re doing the
next couple of steps.
4
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
www.CasablancaFanCo.com 1.888.227.2178
5
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
If you have an angled ceiling:
1. You will need a longer downrod (sold separately).
2. If your ceiling angle is greater than 34°, you will
also need an Angled Mounting Kit (sold separately).
Guide Touches
BOTH Ceiling & Wall
S
I
T
U
A
T
I
O
N
1
Guide Touches Wall
but
NOT Ceiling
S
I
T
U
A
T
I
O
N
2
You need BOTH
a Longer
Downrod &
an Angled
Mounting Kit
You need ONLY
a Longer
Downrod
*most common
If you have a at ceiling:
Hang your fan by a standard downrod (included).
Mounting Options
Support
Structure
Ceiling
Outlet Box
(required)
Angled
Mounting
Style
Standard
Mounting
Style
Support
Structure
Ceiling
Outlet Box
(required)
Use Standard Mounting
or Low-Prole Mounting
to hang the fan from a at ceiling.
Use Angled Mounting
to hang the fan from a
vaulted or angled ceiling.
34OCEILING
WALL
OPTION
1
Standard
Mounting
OPTION 2
Angled
Mounting
2 3
SLIDE
toward ceiling
PLACE
against wall
1
FOLD
on dotted line
34°
Use the three steps below to determine if your ceiling angle is greater than 34°
www.CasablancaFanCo.com 1.888.227.2178
Ceiling Bracket
Refer to warning w.1 on pg. 2
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
For angled ceilings, point
opening toward peak.
If you are unable to do this,
call Technical Support at
1-888-277-2178.
Make sure all four bumpers are
still attached.
Use wood screws
(included) when securing
to support structure with
approved electrical outlet
box. Drill 9/64” pilot holes
in support structure to aid
in securing ceiling bracket
with hardware found in
the hardware bag.
Use machine screws
(provided with outlet
box) when securing to
existing ceiling fan-rated
outlet box. Make sure
it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
OFF
Turn Power
6
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
www.CasablancaFanCo.com 1.888.227.2178
Downrod
Slide
Slide
1 2 3 4 5
678910
Sold Separately
Included
Longer
Downrod
for angled
ceilings or
ceilings 10’ or
higher
Shorter
Downrod
for fans installed
close to ceiling
Standard
Downrod
for ceilings 8-10’ high
Option 1Option 2
Option 3
skip to next page
If you need a different downrod length follow these steps:
Steps 1-5 to remove standard downrod pipe
Steps 6-10 to reassemble with new pipe
Included
(pre-assembled)
7
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
www.CasablancaFanCo.com 1.888.227.2178
KEEP!
8”
3/8”
C
U
T
&
S
T
R
I
P
(not to scale)
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Hand tighten the downrod (at
least 4-5 full turns) until it stops.
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
Downrod (continued)
8” 3/8”
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
K
E
E
P
!
8
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
www.CasablancaFanCo.com 1.888.227.2178
Downrod (continued)
DO NOT PICK THE FAN UP BY THE
CANOPY OR WIRES. Place the downrod
ball into the slot in the ceiling bracket.
Put the wires and downrod through the canopy.
Let the canopy sit loosely on top of the fan.
9
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
www.CasablancaFanCo.com 1.888.227.2178
Wiring
Note: Push the bare metal ends of the
wires together and slide a wire nut over
them. Then, twist the wire nut clockwise
until tight. Give it a gentle pull to make
sure none of the wires are loose.
Blue
Blue
Grounding
G
r
e
e
n
/
Y
e
l
l
o
w
S
t
r
i
p
e
Green/Yellow Stripe
Black
Black
Ungrounded
Connect the three grounding
wires (green, green/yellow
stripe, or bare copper) coming
from the ceiling, downrod, and
hanging bracket.
Connect the yellow wire
from the receiver to the
black wire from the fan.
Yellow
Connect the blue wire
from the receiver to the
blue wire from the fan.
Connect the white (grounded) wire
from the ceiling to both the white
wire from the receiver and the white
wire from the fan.
White
White
Grounded
Connect the black (ungrounded) wire from the
ceiling to the black wire from the receiver.
Slide the
remote
receiver onto
the top of the
bracket.
WARNING
All wiring must be in accordance with
national and local electrical codes ANSI/NFPA
70. If you are unfamiliar with wiring or in
doubt, consult a qualied electrician.
Turn the wires upward and push them carefully back through the hanger bracket
into the outlet box. Make sure that the wires are still attached to the wire nuts.
Receiver
10
M8551-01 • 09/25/18 • © 2018 Casablanca Fan Company
Other Casablanca Fan manuals
Casablanca
Casablanca Zephair User manual
Casablanca
Casablanca CEILING FAN User manual
Casablanca
Casablanca 59090 Instruction manual
Casablanca
Casablanca III User manual
Casablanca
Casablanca WAILEA User manual
Casablanca
Casablanca Isotope User manual
Casablanca
Casablanca Stealth User manual
Casablanca
Casablanca M8539-01 User manual
Casablanca
Casablanca Tribeca Instruction manual
Casablanca
Casablanca Caledonia Instruction manual
Casablanca
Casablanca Trident User manual
Casablanca
Casablanca Utopian 54035 User manual
Casablanca
Casablanca Malibu Star User manual
Casablanca
Casablanca Casablanca 19th Century User manual
Casablanca
Casablanca CEILING FAN User manual
Casablanca
Casablanca M6003-01 User manual
Casablanca
Casablanca CONCENTRA User manual
Casablanca
Casablanca Bel Air User manual
Casablanca
Casablanca utopia 54040 User manual
Casablanca
Casablanca Areto 54120 User manual
Popular Fan manuals by other brands
ELTA FANS
ELTA FANS H03VV-F installation guide
Hunter
Hunter 20714 Owner's guide and installation manual
Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual
Hunter
Hunter Caraway Owner's guide and installation manual
Panasonic
Panasonic FV-15NLFS1 Service manual
Kompernass
Kompernass KH 1150 operating instructions
