Carrier FDT21 User manual

DUCTED TYPE SPLIT SYSTEMS

(3 Phase, Fixed Speed)

FDT21

FDT25

Read this operating & installation instruction carefully and keep it for future reference

Capacity Range : 21 to 25 Kw.

Available with Zone Remote Controller

OPERATION

INSTALLAT I O N

MANUAL

DUCTED TYPE SPLIT SYSTEM HEAT PUMP

CONTENTS

OPERATION INSTRUCTIONS

Preface................................................................................................................... 3

1. Part name and their function.................................................................................. 4

2. How to use the remote control............................................................................... 5-8

3. Maintenance........................................................................................................... 9-10

4. Operating Guide & Precautions..............................................................................11

INSTALLATION INSTRUCTIONS

5. Checking before contacting the service provider................................................... 12

6. Indoor Unit Installation........................................................................................... 13

7. Outdoor Unit Installation........................................................................................ 14-15

8. Pipe Preparation.................................................................................................... 16

9. Piping length and The Elevation............................................................................ 17

10. Piping Connection.................................................................................................. 18

11. Air Purging and Check for Pipe Leakage............................................................... 19

12.Wiring Diagram...................................................................................................... 20

13. Refrigerant Pipe and Drain Pipe............................................................................ 21

14. Test Running......................................................................................................... 22

Checking Product Received

Upon receiving your unit, please inspect for damage. Claims for damage should be reported

immediately to the transportation company. Check that the unit is correct against your order. In

the event an incorrect unit is delivered, it must be returned to the supplier and must NOT be installed.

The manufacturer assumes no responsibility for installation of incorrectly delivered units.

Before Installation

Read all instructions carefully prior to installation. Please ensure every step described in this manual is

understood and taken into account before starting installation.

Proper installation will help ensure trouble free operation. Improper installation may result in problems

such as noisy operation, compressor damage, improper operation or dangerous conditions that could

result in injury or property damage and this could also void the warranty.

Overcurrent Protection

Overcurrent protection which is less than the recommendation could result in unnecessary fuse failure

and chargeable service call. The manufacturer bears no responsibility for damage caused to the

equipment as a result of deviation from the recommended rating.

Refrigerant tubing

Keep refrigerant tubing clean and dry prior to and during installation to avoid equipment damage.

Homeowner

The user should retain this manual for future reference. To ensure the warranty is continued

and valid, the unit shall be required to be serviced as per section on “REGULAR/ PREVENTIVE

MAINTENANCE”. Attention should be given to the air inlet side of the outdoor coil to ensure that

leaves, grass and etc are not being drawn into the unit. Restriction to air ﬂow across the coil will

reduce the system capacity or result in high operating pressures and excessive operating cost. There

must be air ﬁlters installed in the system at some point upstream to the indoor unit. Air ﬁlters should

be inspected at least once a month.

Your air conditioner is designed and built with reliable components to provide years of trouble free

dependable service. However, it will require regular maintenance either by yourself (end user)

or a licensed technician to keep your warranty on the unit valid.

Important

The Australian greenhouse ofﬁce has issued various regulations on the use and disposal of refrigerants

in this unit. Failure to follow these regulations may harm the environment and could lead to the

imposition of substantial ﬁnes.

Only qualiﬁed and licensed technician should perform work on this unit, otherwise the warranty on the unit

will be void.

PART NAMES AND THEIR FUNCTIONS

Wired Remote

Control

OPERATION INSTRUCTIONS

WIRED REMOTE CONTROLLER

1). BASIC FUNCTION:

The following features can be operated by buttons on the Display unit.

Pressing button will turn the air conditioner on or off. When turned on, it will operate

according to the setting shown on the Display unit. The Zone Indicators

on the Display unit will show the zones being opened.

FAN

AUTO MODE :

When the fan speed is put in auto speed, the speed will be adjusted automatically according to

the difference between the room temperature and setting temperature.

If the difference is 3ºC or more, the speed is high.

If the difference is 2ºC, the speed is medium.

If the difference is 1ºC or less, the speed is low.

NOTE : The FAN button can not be used in DRY mode.

NOTE : 7 day program only for 4 Zone control.

AB C D

Press button to set fan speed low, medium, high or auto).

Auto Low Medium High

HOW TO USE THE REMOTE CONTROL OPERATION INSTRUCTIONS

The setting temperature can be set in the range of 18-30ºC by pressing TEMPor TEMP

button. The LCD on the Display unit will show the setting temperature.

TEMP

MODE

OPERATING MODE

By pressing MODE button, the air conditioner can be put in one of the 5 operating modes

(fan, cool, dry, heat, auto).

1. Fan Mode: The system will operate as Fan only. The SLEEP, TEMP and TEMP buttons

are not used.

2. Cool Mode: The system will operate as the cooling unit. The room sensor for cool mode is located

at the return air near the indoor coil.

3. Dry Mode: The system will operate as the Dehumidiﬁer. In dehumidifying, the temperature will be

reduced. An indoor unit will operate intermittently in the cool mode and an outdoor unit

4. Heat Mode: The system will operate as the heat pump by switching on the reversing valve relay.

The room sensor for heat mode is located at the display touch pad.

5. Auto Mode: The system will operate in either Cool mode or Heat mode automatically depending

upon the room temp and set temp. At this mode, sing “Cool” and “Heat” will appear

However, the compressor is subjected to 3-minute delay protection each time it stops.

will stop operating intermittently.

However, the compressor is subjected to 3-minute delay protection each time it stops.

simultaneously on the display screen.

HOW TO USE THE REMOTE CONTROL OPERATION INSTRUCTIONS

The enhanced features that the user has to go into menu window. Press MENU button to display the menu.

NOTE : To exit is to press

CLOCK SETTING

To set the clock is by

Move cursor to position and then press MENU button.

Pressor button for Hour setting.

Useor button to enter into Minute setting and then press or button for setting.

Use button to enter into Day setting and then press or button for setting.

Press MENU button to conﬁrm.

Press button to exit.

NOTE :If Timer on/off is set, there will be no Clock display.

TIMER ON

Move cursor to ON position and then press MENU button.

Pressor button for Hour setting.

Useor button to enter into Minute setting and then press or button for setting.

Press MENU button to conﬁrm.

Press button to exit.

button to exit.

NOTE : To cancel is by pressing POWER button while in this setting mode.

TIMER OFF

Move cursor to position and then press MENU button.

Pressor button for Hour setting.

Useor button to enter into Minute setting and then press or button for setting.

Press

NOTE : To cancel is by press POWER button while in this setting mode.

OFF

2). ENHANCED FEATURES :

ON OFF ZONE 7 DAY

ZONE CONTROL

To turn on/off the zone dampers is to

Move cursor to zone position and then press MENU button.

Press A or B button (in case of 2 zone control) or A or B or C or D button (in case of 4 zone control)

NOTE : By pressing & holding MENU button for 2 second the system will enter to ZONE mode immediately.

to turn on/off any particular zone(S),Display shows the active zone(S).

Press MENU button to conﬁrm.

Press button to exit.

HOW TO USE THE REMOTE CONTROL OPERATION INSTRUCTIONS

The system can be programmed to turn on/off on 5 , 2 or 7 day basis.

Move cursor to 7 DAY position and then press MENU button.

Use or button to select 5, 2 or 7 day setting and then press MENU button.

5 day setting (Mon - Fri) 2 day setting (Sat - Sun)

7 day setting (Mon - Sun)

7 Day program (For 4 Zone Control Only)

Note : -If 7 Day program's Timer on/off is set, the LCD show "7 DAY".

-To override press button and hold for 5 seconds. The LCD shows "7 DAY" in blinking.

-To deactivate the override press button and hold for 5 seconds again.

(Timer on setting): Press or button for Hour setting. (Press button to skip Timer On Setting)

Use or button to enter into Minute setting and press or

button setting.

Press MENU button to conﬁrm setting.

(Timer off setting): Repeat step the same as timer on setting.(Press button to skip Timer Off Setting)

Press button to exit 7 day program. The LCD "7 day" will show on display.

To cancel 7 Day program:

Press MENU button.

Move cursor to 7 day position and then press MENU button.

Press MENU button again to enter into "Timer On" setting.

Press button 2-3 times to exit 7 day mode. The LCD "7 day" will disappear.

HOW TO USE THE REMOTE CONTROL OPERATION INSTRUCTIONS

CLEANING THE INTERNAL AIR FILTERS

SUGGESTION :

AT THE START OF THE SEASON DURING THE OFF SEASON

Before inspection and maintenance of the unit, always set the main power switch to "OFF" to cut off power supply.

Remove the air ﬁlter; clean it with a vacuum cleaner or

if it is very dirty, wash it with soap water then wipe

off until it is completely dry before reinstallation.

*To remove the air ﬁlter, consult an installer.

If the air ﬁlter is dirty, it will cause the reduction

of airﬂow, The unit is overloaded and

consumes 6% more of electricity. So regular

cleaning is neccessary.

Check that nothing blocks the air inlet and outlet Cut off the power supply main switch.

of indoor and outdoor units. if not using for heating.

Running the unit without an air ﬁlter can cause

malfunctions due to dirt or dust. Always install

an air ﬁlter at all times.

Check that the drainage hose is not

obstructed or clogged.

3.2 3.3

Clean the air ﬁlter and other parts.

Leave the circulation fan running for 2-3 hours

to dry out the inside of the unit.

MAINTENANCE OPERATION INSTRUCTIONS

MAINTENANCE SCHEDULE

Your air conditioner is designed and built with reliable components to provide years of trouble free

dependable service. To preserve your investment for many years to come it is in your interest to

ensure the unit is properly maintained and regularly services as per the schedule stated below.

Weekly Monthly Yearly

By End User

Air ﬁlter cleaning X

Air ﬁlter inspection X

Remote (battery) – if any X

By Licensed Technician

Air ﬁlter inspection X

Indoor coil X

Outdoor coil X

Refrigerant charge X

Air Filter

It is important to check air ﬁlters as per the recommendation above and replace as necessary.

Dirty air ﬁlter will not allow the correct amount of air to pass through the cooling/ heating coil,

which effectively will reduce the rated capacities, affect the refrigerant superheating and the overall

operation of your air conditioner.

Indoor Coil

When the air ﬁlter is cleaned as per recommended, the indoor coil will require minimal cleaning. The

life span of the indoor coil will be pro-longed for effective heat transfer.

Outdoor Coil

The outdoor coil is required for effective heat transfer between the air conditioner and the external

environment, if the external environment air is dirty the frequency of cleaning should be increased

from the recommendation.

Refrigerant

The refrigerant is the “blood line” of the air conditioning system, the air conditioner will work

efﬁciently and effectively with the correct amount of refrigerant charge. Systems that run short on

refrigerant charge may eventually cause a compressor burn out.

MAINTENANCE OPERATION INSTRUCTIONS

This manual suits for next models

Table of contents

Other Carrier Air Conditioner manuals

Carrier

Carrier 42TSR018~025 Series User manual

Carrier

Carrier 51AKB065 User manual

Carrier

Carrier 38GP Assembly instructions

Carrier

Carrier 38YXA Instructions and recipes

Carrier

Carrier 38CKC Operation manual

Carrier

Carrier 52S series Assembly instructions

Carrier

Carrier TOSHIBA MMD-UP0071BHP-UL User manual

Carrier

Carrier COMFORT 50EZ-A30 User manual

Carrier

Carrier Single-Stage Comfort 24ACB User manual

Carrier

Carrier 40TSF0131UP User manual

Carrier

Carrier CA16NA 018-061 Operation manual

Carrier

Carrier 38BA User guide

Carrier

Carrier 48TC series Installation and user guide

Carrier

Carrier Atmosphera 42EM series User manual

Carrier

Carrier 24ABB Comfort User manual

Carrier

Carrier Legacy 548J07 User manual

Carrier

Carrier 42XPP050 User manual

Carrier

Carrier 40MAQ User manual

Carrier

Carrier 38WAH036 User manual

Carrier

Carrier 50CD/CH Dimensions and installation guide

Carrier

Carrier 52VQR09 User manual

Carrier

Carrier WeatherMaker 50KCQ A04 Series Installation and user guide

Carrier

Carrier 38XTZ 007-024 Manual

Carrier

Carrier 51FE User guide

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual