Carrier 42TVCA010 User manual

1129850204

OWNER’S MANUAL

ENGLISH

FRANÇAIS

ITALIANO

DEUTSCH

PORTUGUÊS

POLSKI

ČESKY

ΕΛΛΗΝΙΚΑ

ENGLISH

FRANÇAIS

ITALIANO

DEUTSCH

PORTUGUÊS

POLSKI

ČESKY

ΕΛΛΗΝΙΚΑ

FRANÇAIS

ภาษาไทย

AIR CONDITIONER (SPLIT TYPE)

For general public use

Indoor unit

42TVCA010, 013, 018

Outdoor unit

38TVCA010, 013, 018

R32

OM_1129850204_EN - TH.indb 1OM_1129850204_EN - TH.indb 1 7/1/2564 BE 18:597/1/2564 BE 18:59

PRECAUTIONS FOR SAFETY

Read the precautions in

this manual carefully before

operating the unit.

This appliance is ﬁlled with R32.

●Keep this manual where the operator can easily ﬁnd it.

●Read the precautions in this manual carefully before operating the unit.

●This appliance is intended to be used by expert or trained users in shops, in light

industry and on farms, or for commercial use by lay persons.

●The precautions described herein are classiﬁed as DANGER, WARNING and

CAUTION. They both contain important information regarding safety. Be sure to

observe all precautions without fail.

DANGER

●Do not install, repair, open or remove the cover. It may expose you to

dangerous voltages. Ask the dealer or the specialist to do this.

●Turning off the power supply will not prevent potential electric shock.

●The appliance shall be installed in accordance with national wiring regulation.

●Means for disconnection from the supply having a contact separation of at least

3 mm in all poles must be incorporated in the ﬁxed wiring.

●The appliance must be stored in a room without continuously operating ignition

sources (for example, open ﬂames, an operating gas appliance or an operating

electric heater).

●In order to avoid ﬁre, explosion or injury, do not operate the unit when harmful

gases (e.g. ﬂammable or corrosive) are detected near the unit.

WARNING

●Do not expose your body directly to cool or warm air for a long time.

●Do not insert your ﬁnger or any article into the air inlet/outlet.

●When an abnormality (burning smell, etc.) occurs, stop the air conditioner and

disconnect the power supply or turn off the breaker.

●This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

●This appliance is not intended for use by person (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

●The air conditioner must be installed, maintained, repaired and removed by a

qualiﬁed installer or qualiﬁed service person. When any of these jobs is to be

done, ask a qualiﬁed installer or qualiﬁed service person to do them for you.

●Children should be supervised to ensure that they do not play with the

appliance.

01_OM_1129850204_EN.indd 101_OM_1129850204_EN.indd 1 8/1/2564 BE 15:378/1/2564 BE 15:37

PRECAUTIONS FOR SAFETY

●Do not use any refrigerant different from the one speciﬁed (R32) for

complement or replacement. Otherwise, abnormally high pressure may be

generated in the refrigeration cycle, which may result in a failure or explosion of

the product or an injury to your body.

●Do not use means to accelerate the defrosting process or to clean, other than

those recommended by the manufacturer.

●The appliance shall be stored in a room without continuously operating ignition

sources (for example: open ﬂames, an operating gas appliance or an operating

electric heater).

●Be aware that refrigerants may not contain an odour.

●Do not pierce or burn as the appliance is pressurized. Do not expose the

appliance to heat, ﬂames, sparks, or other sources or ignition. Else, it may

explode and cause injury or death.

CAUTION

●Do not wash the unit with water. It may cause an electric shock.

●Do not use this air conditioner for other purposes such as preserving food,

breeding animal, etc.

●Do not step or put anything on the indoor/outdoor unit. It may cause an injury or

damage the unit.

●Do not touch aluminium ﬁn because it may cause an injury.

●Before cleaning the unit, turn off the main switch or the circuit breaker.

●When the unit won’t be used for a long time, turn off the main switch or the

circuit breaker.

●It is recommended that maintenance be performed by a specialist when the unit

has been operated for a long time.

●The manufacturer shall not assume any liability for the damage caused by not

observing the description of this manual.

●Remote controller and Holder are contained with magnet please keep far from

product that effect with magnet (such as electronics appliance magnetic strip

card and etc.)

●High temperature, high magnet ﬁeld and direct force collisions may effect to

magnet force down.

01_OM_1129850204_EN.indd 201_OM_1129850204_EN.indd 2 8/1/2564 BE 15:378/1/2564 BE 15:37

INDOOR UNIT DISPLAY

AIR FLOW DIRECTION

AUTOMATIC OPERATION

To automatically select cooling or fan only operation

1. Press

MODE

MOD

: Select Auto A.

2. Press : Set the desired temperature. Min. 17°C, Max. 30°C.

3. Press FAN

FAN

: Select AUTO, LOW , LOW+ , MED ,

MED+ , HIGH or Quiet

1. Press

MODE

MOD

: Select Cool , or Fan only .

2. Press : Set the desired temperature. Min. 17°C, Max. 30°C.

Fan Only: No temperature indication

3. Press FAN

FAN

: Select AUTO, LOW , LOW+ , MED ,

MED+ , HIGH or Quiet

DRY OPERATION

For dehumidiﬁcation, a moderate cooling performance is controlled

automatically.

1. Press

MODE

MOD

: Select Dry .

2. Press : Set the desired temperature. Min. 17°C, Max. 30°C.

Note: DRY mode fan speed is set to Auto only.

Press FIX

FIX

: Move the

louver in the desired vertical

direction.

Press FIX

FIX

: Move the

louver in the desired horizontal

direction.

H.DA

Swing off

Vertical

(Up-Down)

Swing

Vertical and

Horizontal

Swing

Horizontal

(Left-Right)

Swing

HADA CARE

FLOW

SWING operation can be

selected from MENU button

MEN

●Vertical (Up-Down) swing

●Horizontal (Left-Right) swing

●HADA Care ﬂow

Note:

●Do not move the louver manually by hands or others.

●The louver may automation positioning by some operation mode.

●Display brightness can be adjusted, follow procedure on ".

1ECO (White)

2Wi-Fi access (White)

3PURE (White)

4Timer (White)

5Operation Mode

- Cool (Blue)

Preparing Filters

1. Open the air inlet grille and remove the air ﬁlters.

Attach the ﬁlters. (see detail in the Installation Manual).

Loading Batteries (when use wireless operation.)

1. Remove the slide cover.

2. Insert 2 new batteries (AAA type)

following the (+) and (–) positions.

Remote Control Reset

1. Remove the batteries.

2. Press .

3. Insert the batteries.

PREPARATION BEFORE USE

REMOTE CONTROL

1Infrared signal emitter

2Start/Stop button

3Mode select button

4Temperature button

5Fan speed button

6Menu select button

7Set louver Up-Down button

Set louver Left-Right button

9Check button*

*Check button under battery cover

FIX

MODE

FAN MENU

FIX

FAN

MEN

MOD

COOLING / FAN ONLY / OPERATION

01_OM_1129850204_EN.indd 301_OM_1129850204_EN.indd 3 8/1/2564 BE 15:378/1/2564 BE 15:37

MENU SETUP

For select more setting of Air conditioner such as Louver select

Hi Power, OFF Timer and other use MENU button MENU

MEN

FIX

MODE

FAN MENU

FIX

FAN

MEN

MOD

8.1 LOUVER SWING and HADA CARE FLOW OPERATION

Comfortable air ﬂow can select from feature.

Louver swing opearation:

●To distribute air ﬂow in both vertical and horizontal by swing the louver

automatically.

HADA care ﬂow operation:

●Air ﬂow upward to the ceiling, provide Indirect air ﬂow to body and

homogenize room temperature.

Note:

●During HADA CARE FLOW mode, FIX button cannot active.

Louver Swing and HADA Care Flow Operation Setting

1. Press MENU button for enter menu selection

MEN

°C

Blink

During triangle mark blink can select menu by press TEMP. button.

2. Enter Louver set by press MENU button again.

triangle mark will stop blink and setting feature will be blink instead.

°C

Blink

MEN

3. Select Louver swing or HADA CARE FLOW by press TEMP. button.

°C

H.DA

Swing off Vertical

(Up-Down)

Swing

Vertical and

Horizontal

Swing

Horizontal

(Left-Right)

Swing

HADA CARE FLOW

4. Conﬁrm selected feature by press MENU button again.

MEN

°C

When feature had selected will return to menu selection display triangle mark

will blink .

5. Leave from menu setting display by select exit and press menu button

MEN

°C

Leave from menu setting to normal display (no triangle and feature blink).

01_OM_1129850204_EN.indd 401_OM_1129850204_EN.indd 4 8/1/2564 BE 15:388/1/2564 BE 15:38

8.2 SILENT OPERATION (Outdoor Unit)

Keep outdoor unit operating silently to ensure either yourself or neighborhood

will have a tight sleep in nighttime. By this feature, the cooling capacity will

be optimized to deliver such silent experience. The silent operation can be

selected from one of two purposes (Silent 1 and Silent 2).

There are three setting parameters: Standard level > Silent 1 > Silent 2

Silent 1:

●Though operating silently, the Cooling capacity is still prioritized to ensure

having sufﬁcient comfort inside the room.

●This setting is a perfect balance between the Cooling capacity and the

Sound level of outdoor unit.

Silent 2:

●Compromising the Cooling capacity to the Sound level in any circumstance

where the outdoor unit’s sound level is highly prioritized.

●This setting has a purpose to reduce the maximum sound level of outdoor

unit.

Note:

●While activating of Silent operation, inadequate cooling capacity may occur.

Silent Operation Setting

1. Press MENU button for enter menu selection

MEN

°C

Blink

During triangle mark blink can select menu by press TEMP. button.

°C

Blink both triangle and

feature mark Feature not

yet set

2. Enter SILENT set by press MENU button.

triangle mark will stop blink and setting feature will be blink instead.

°C

MEN

3. Select SILENT operation by press TEMP. button.

°C

SILENT#1 SILENT#2 None

4. Conﬁrm selected feature by press MENU button again.

MEN

°C

Blink only triangle

Feature already set

When feature had selected will return to menu selection display triangle mark

will blink

5. Leave from menu setting display by select EXIT.

MEN

°C

8.3 Hi POWER OPERATION Hi-P

To automatically control room temperature and airﬂow for faster cooling

operation (except in DRY and FAN ONLY mode)

1. Press MENU button for enter menu setting and press TEMP. button to

select Hi POWER

MEN

°C

Blink both triangle and

feature mark Feature not

yet set

2. Conﬁrm selected feature by press MENU button again.

MEN

°C

Blink only triangle Feature

already set

3. Leave from menu setting display by select EXIT.

°C

8.4 ECO OPERATION

ECO

To automatically control room temperature to save energy

(except in DRY and FAN ONLY mode)

1. Press MENU button for enter menu setting and press TEMP. button to

select ECO

MEN

°C

Blink both triangle and

feature mark Feature not

yet set

2. Conﬁrm selected feature by press MENU button again.

MEN

°C

Blink only triangle Feature

already set

3. Leave from menu setting display by select EXIT.

MEN

°C

Note:

●Cooling operation; the set temperture will increase automatically

1 degree/hour for 2 hours (maximum 2 degrees increase).

01_OM_1129850204_EN.indd 501_OM_1129850204_EN.indd 5 8/1/2564 BE 15:388/1/2564 BE 15:38

8.6 PLASMA ION OPERATION

PURE

Capture efﬁciency of ﬂoating impurities in the air is accelerated by plasma ion

contaminates such as bacteria, odor, smoke, dust and virus are caught and

deactivated by Plasma Ion.

1. Press MENU button for enter menu setting and press TEMP. button to

select PURE

MEN

°C

Blink both triangle and

feature mark Feature not

yet set

2. Conﬁrm selected feature by press MENU button again.

MEN

°C

Blink only triangle Feature

already set

3. Leave from menu setting display by select EXIT.

MEN

°C

Note:

●Plasma Ion operation dose not remove harmful substances from cigarette

smoke (carbon monoxide etc.). Open a window occasionally for ventilation.

8.5 TIMER OFF OPERATION

To set the timer OFF when the air conditioner is operating.

1. Press MENU button for enter menu setting and press TEMP. button to

select TIMER OFF.

MEN

°C

Blink both triangle and

feature mark Feature not

yet set

2. Enter TIMER set by press MENU button.

triangle mark will stop blink and setting feature will be blink instead.

MEN

3. Select TIMER OFF by press TEMP. button.

Can select TIMER OFF from 0.5 - 12hrs.

4. Conﬁrm TIMER OFF by press MENU button.

MEN

°C

Blink only triangle

Feature already set

5. Leave from menu setting display by select EXIT.

MEN

°C

Note:

●The setting will be saved for the next same operation.

Cancel TIMER OFF

6. During TIMER OFF already set (no.5) press MENU button and press

TEMP. button to select TIMER OFF.

MEN

°C

Blink only triangle

Feature already set

7. Press MENU button again will cancel TIMER OFF.

MEN

°C

Blink both triangle and feature

mark Feature not yet set

8. Leave from menu setting display by select EXIT.

MEN

°C

01_OM_1129850204_EN.indd 601_OM_1129850204_EN.indd 6 8/1/2564 BE 15:388/1/2564 BE 15:38

8.7 POWER-SELECTION OPERATION

This function is used when the circuit breaker is shared with other electrical

appliances. It limits the maximum current and power consumption to 100%,

75%, or 50% and can be implemented by POWER-SELECTION. The lower

percentage, the higher saving and also longer compressor lifetime.)

1. Press MENU button for enter menu setting and press TEMP. button to select

POWER-SEL

Blink only triangle

MEN

°C

2. Enter POWER-SEL setting by press MENU button again.

MEN

°C

3. Select POWER-SEL level by press TEMP. button.

°C

100% 75% 50%

4. Conﬁrm POWER-SEL level by press MENU button.

MEN

°C

5. Leave from menu setting display by select EXIT.

MEN

°C

Note:

●Due to the reason that POWER-SELECTION function limits the maximum

current, inadequate cooling capacity may occur.

DISPLAY LAMP BRIGHTNESS ADJUSTMENT

To decrease the display lamp brightness or turn it off.

1. Press and hold FAN

FAN

for 3 seconds until brightness level ( , ,

or ) is shown on remote control LCD then release the button.

2. Press Rise or

Decrease

to adjust brightness in 4 levels.

Remote control

LCD Operation display Brightness

Lamp illuminates full brightness.

100%

Lamp illuminates 50% brightness.

50%

Lamp illuminates 50% brightness and the

operation lamp is turned off.

50%

All lamps are turned off.

All turned off

●

In the examples of and , the lamp illuminates for 5 seconds before going off.

AUTO RESTART FUNCTION SETTING

This product is designed so that, after a power failure, it can restart automatically

in the same operating mode as before the power failure.

Information

The product is shipped with Auto Restart function in the ON position.

Turn it OFF if this function is not required.

How to turn OFF the Auto Restart Function

●Press and hold the [OPERATION] button on the indoor unit for 3 seconds

(3 beep sounds but OPERATION lamp does not blink).

How to turn ON the Auto Restart Function

●Press and hold the [OPERATION] button on the indoor unit for 3 seconds

(3 beep sounds and OPERATION lamp blink 5 time/sec for 5 seconds).

Notes :

●In case of ON timer or OFF timer are set, AUTO RESTART OPERATION

does not activate.

●Default setting of AUTO RESTART OPERATION is ON.

SELF CLEANING OPERATION

(COOL AND DRY OPERATION ONLY)

To protect bad smell caused by the humidity in the indoor unit.

1. If the button is pressed once during “Cool” or “Dry” mode,

the fan will continue to run for other 30 minutes, then it will turn off

automatically. This will reduce the moisture in the indoor unit.

2. To stop the unit immediately, press the more 2 times within 30

seconds.

01_OM_1129850204_EN.indd 701_OM_1129850204_EN.indd 7 8/1/2564 BE 15:388/1/2564 BE 15:38

Firstly, turn off the circuit breaker.

Indoor Unit and Remote Control

●

Clean the indoor unit and the remote control with a wet cloth when needed.

●No benzine, thinner, polishing powder or chemically-treated duster.

Air ﬁlters

Clean every 2 weeks.

1. Open the air inlet grille.

2. Remove the air ﬁlters.

3. Vacuum or wash and then dry them.

4. Reinstall the air ﬁlters and close the air inlet grille.

MAINTENANCE

The unit does not operate.

Cooling or Heating is abnormally low.

●The power main switch is

turned off.

●The circuit breaker is activated

to cut off the power supply.

●Stoppage of electric current

●ON timer is set.

●The ﬁlters are blocked with dust.

●

The temperature has been set improperly.

●The windows or doors are opened.

●The air inlet or outlet of the outdoor

unit is blocked.

●The fan speed is too low.

●The operation mode is FAN or DRY.

●POWER SELECTION function is

set 75% or 50% (This function is

depend on remote controller).

TROUBLESHOOTING (CHECK POINT)

TEMPORARY OPERATION

In case of the misplaced or discharged remote control

●Pressing the RESET button, the unit can start

or stop without using the remote control.

●Operation mode is set on AUTOMATIC

operation, preset temperature is 24°C and fan

operation is automatic speed.

OPERATION / RESET Button

REMOTE CONTROL A-B SELECTION

To separate using of remote control for each indoor unit in case of 2 air

conditioners are installed nearly.

Remote Control B Setup.

1. Press RESET button on the indoor unit to turn the air conditioner ON.

2. Point the remote control at the indoor unit.

3. Push and hold button on the back side of Remote Control “00” will be

shown on the display. (Picture 1)

4. Press

MODE

MOD

during pushing . “B” will show on the display and

“00” will disappear and the air conditioner will turn OFF. The Remote

Control B is memorized. (Picture 2)

Note: 1. Repeat above step to reset Remote Control to be A.

2. Remote Control A has not “A” display.

3. Default setting of Remote Control from factory is A.

OPERATION AND PERFORMANCE

1. Three-minute protection feature: To prevent the unit from being activated

for 3 minutes when suddenly restarted or switched to ON.

Some minor cracking sound may occur when unit operating. This is normal

because the cracking sound may be caused by expansion/contraction of plastic.

Air conditioner operating conditions

Temp.

Operation

Outdoor Temperature Room Temperature

Cooling –15°C ~ 46°C 21°C ~ 32°C

Dry –15°C ~ 46°C 17°C ~ 32°C

01_OM_1129850204_EN.indd 801_OM_1129850204_EN.indd 8 8/1/2564 BE 15:388/1/2564 BE 15:38

WIRELESS LAN CONNECTION

Carrier In The Air

Please visit the application store on your device to download and install Carrier

In The Air application.

Open an application and follow register for User registration.

1Tab Register

5Enter password by 6-10

characters, combination of

alphabet and number

2Enter email address

6Check for term and condition

3Select country

7Conﬁrm information

4Enter user name

8Information will be submitted

to email, click link to conﬁrm

Application

Keyword : Carrier In The Air Android : Version 5.0 or later.

iOS : 9.0 or later.

About Carrier In The Air

1. Carrier In The Air can control AC operation by Smartphone or

tablet (mobile device) via internet connection.

2. Everywhere control, control software run on Cloud system and mobile

device can set and monitor AC operation via internet connection.

Everyone can control, 1 Wireless adapter maximum 5 User

(use 1 email register).

4. Multi AC system control, 1 user can control 10 AC.

5. Group control.

5.1 Can create and control 3 groups of AC.

5.2 Can control max 10 AC per group.

Note:

1. Adapter can register only 1 email address, if register with new email, current email will be invalid.

2.1 email address can use for register 5 devices for control same AC.

Carrier In The Air application support

01_OM_1129850204_EN.indd 901_OM_1129850204_EN.indd 9 8/1/2564 BE 15:388/1/2564 BE 15:38

Other manuals for 42TVCA010

This manual suits for next models

Table of contents

Languages:

Other Carrier Air Conditioner manuals

Carrier

Carrier 73XC-1SS Operating instructions

Carrier

Carrier 24ANA1 Infinity Operation manual

Carrier

Carrier WEATHERMASTER 50HJQ004 Dimensions and installation guide

Carrier

Carrier 50TC*D17 Series User manual

Carrier

Carrier WeatherMaker 50FC-16 Series User manual

Carrier

Carrier PA4G User manual

Carrier

Carrier 40MBF Series User manual

Carrier

Carrier 48ES---A Instruction Manual

Carrier

Carrier XCT 7 40VK005-030S-7S-QEE Installation instructions

Carrier

Carrier 42PHQ P Series User manual

Carrier

Carrier Air Conditioner User manual

Carrier

Carrier 42ADF035M User manual

Carrier

Carrier 48ES-A36 Instruction Manual

Carrier

Carrier Creation Green 53KHET30N2-708F User manual

Carrier

Carrier N Style User manual

Carrier

Carrier GR-45 Operation manual

Carrier

Carrier Comfort 50VL-B User manual

Carrier

Carrier Comfort 24ACB3 Operation manual

Carrier

Carrier 38TG Operation manual

Carrier

Carrier 48/50P030-100 Dimensions and installation guide

Carrier

Carrier 38BRC Manual

Carrier

Carrier 42TSU010 User manual

Carrier

Carrier G Series Cooling User manual

Carrier

Carrier 42QHC009DS series User manual

Popular Air Conditioner manuals by other brands

Spheros

Spheros CC 355 instructions

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE owner's manual

Panasonic

Panasonic CS-E12HKEW operating instructions

nedis

nedis ACMB1WT7 quick start guide

Samsung

Samsung AR KV Series User & installation manual

Daikin

Daikin FCFV50A Operation manual

Fujitsu

Fujitsu Inverter ASBA30JFC operating manual

Toshiba

Toshiba RAS-M10SMUV-E installation manual

Daikin

Daikin FXLQ20MAVE Operation manual

Hitachi

Hitachi RAS-E24CAK instruction manual

CIAT

CIAT Magister 2 Series Installation, Operation, Commissioning, Maintenance

Bestron

Bestron AAC6000 instruction manual

Hisense

Hisense 7K Use and Installation Instructions

Frigidaire

Frigidaire FFRE0533S1E0 Use & care guide

Samsung

Samsung AS09HM3N user manual

Frigidaire

Frigidaire CRA073PU11 use & care

Soleus Air

Soleus Air GB-PAC-08E4 operating instructions

McQuay

McQuay MCK020A Technical manual