Canon ImageFormula DR-7080C User manual

CANON Customer Service Centers

©CANON ELECTRONICS INC. 2004 PRINTED IN JAPANPUB.CE-CE-313 0204AB00

SCANNING BASICS

USEFUL FEATURES

TROUBLESHOOTING

QUICK REFERENCE

UNIVERSAL DOCUMENT SCANNER

PRECAUTIONS

The DR-7080C is a universal scanner that offers high-speed scanning in black and

white, grayscale, and color. To ensure optimum performance, please follow the

recommendations below.

●Make sure that your documents are within the acceptable scanning sizes.

Width: 5.5 to 12 inches (139.7 to 304.8 mm)

Length: 5 to 17 inches (128 to 432 mm)

Long Document Mode: document length can be up to 24 inches (630 mm)

Long Document Mode/Color 600 dpi Mode: length up to 21 inches (540 mm)

Document thickness:

Black and white documents: 0.06 to 0.15 mm (Simplex), 0.07 to 0.15 mm (Duplex)

Mixed batches (black and white, color documents): 0.07 to 0.15 mm

Color documents: 0.08 to 0.15 mm

Document weight:

Black and white documents (Simplex): 11 to 32 lb. bond (42 to 128 g/m2)

Black and white documents (Duplex): 13 to 32 lb. bond (50 to 128 g/m2)

Mixed batches (black and white, color documents): 13 to 32 lb. bond (50 to 128 g/m2)

Color documents: 17 to 32 lb. bond (64 to 128 g/m2)

●Turn on the Long Document Mode to scan long documents. (See p.9)

●If there is any wet ink or paste on the document, wait until the ink or paste has thoroughly

dried before scanning the document.

●Always clean the scanning rollers after scanning a document that has pencil writing on it.

●If you scan thin paper in Duplex mode, the ink printed on the back side may appear in your

image data. Adjust scanning density to avoid this.

●Scanning documents with a rough surface may cause a paper jam. To avoid this, select

[Flatbed] and scan the documents one page at a time.

●When you scan a batch of NCR documents, make sure they are not stuck together. If a

jam occurs, select [Flatbed] and scan the documents one page at a time.

Refer to Chapter 4.1 of the DR-7080C Instructions manual for further details on acceptable document types.

■ DOCUMENT TYPES TO AVOID

Feeding such documents may result in paper jams, damage to documents, or scanner malfunction. To scan these

documents, use the flatbed (platen glass) instead.

Wrinkled or

creased paper

Curled paper

Torn paper

Paper with clips

or staples

Carbon-backed paper

Coated paper or fax

recording paper

Onion skin or

other thin paper

Paper with binding

holes

SCANNING BASICS

GETTING STARTED

This section explains the basic steps involved in scanning a

document. Batches are assumed to contain papers all of the same

size and thickness. When turning ON the power, be sure to turn ON

the scanner before you turn ON the connected computer.

The purpose of this Quick Reference is to provide a

concise overview of the DR-7080C. It is designed to

supplement—not replace—the Instructions manual

included with the scanner. Please review the DR-

7080C Instructions manual for key information on

safety precautions, installation procedures, and

maintenance guidelines.

▲

Load Limitation Mark

Do not exceed this mark.

Overloading the feeder may

cause jamming.

FEEDER To prepare the feeder for scanning, adjust the slide guides to the

appropriate document size. Also, align the edges of your documents

to ensure smooth feeding. Documents are loaded into the feeder with

the scanning side face up.

If you are scanning large-sized NCR paper or thin paper, place some paper in the

document eject tray before scanning. For details, refer to Chapter 4.2 of the DR-7080C

Instructions manual.

▲

Slide Guides

FLATBED

▲

■ How to use the flatbed

First, raise the feeder. Documents are to be placed on the platen glass

with the scanning side face down. The corner of the document should be

aligned with the upper left corner of the platen glass. When you lower the

feeder, do this slowly and carefully.

■ Scanning a book or thick document

When scanning thick documents or books, either leave the feeder raised

or operate the feeder as shown below.

A. Raise the feeder. While pressing on the bottom of the feeder (1), pull

the feeder down and forward (2).

B. Set the thick document or book on the platen glass and hold the feeder

lightly while scanning.

C. To return the feeder to its original position, raise it all the way (1) and

then close it slowly and carefully (2).

SCANNING BASICS

(2)

(1)

(2)

AB C

Book or Thick Document

1.96"(50 mm)

SCAN SETTINGS The DR-7080C is operated via the bundled ISIS/TWAIN driver, which

is compatible with a wide range of application software. Prior to

scanning, use the ISIS/TWAIN driver to select the scanning side,

feeding option, and any other setting you require.

▲

SCANNING BASICS

■ Standard:

Select this mode when you wish to use your application software to

start or stop scanning.

■ Panel:

Select this mode if you need to continuously scan multiple batches or

scan a book page by page. In this mode, scanning starts by pressing

the scanner’s built-in [Start] key.

■ Automatic:

For feeder use only. Select this mode to scan batches of documents

with the feeder. The scanner will start automatically when it detects a

document in the document feeder tray.

Feeding Option

Scanning Side

SCANNING SIDE

▲

FEEDING OPTION

▲

■ For feeder scanning: Select [Simplex] or [Duplex].

■ For flatbed scanning: Select [Flatbed].

SCANNING BASICS

To finish scanning, execute the required command from the application.

STEP 1Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.

▲

STANDARD FEEDING

STEP 2Place the document on the scanner.

▲

STEP 3From the application you are using, execute the required command to

start scanning.

▲

STEP 4When scanning of the document is complete, the application goes into

Ready Mode. If you wish to scan another document, repeat steps 2

and 3.

▲

PANEL FEEDING

SCANNING BASICS

STEP 1Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.

▲

STEP 2From the application you are using, execute the required command to

start scanning. The [Start] key lamp will turn green.

▲

STEP 3Place the document on the scanner.

▲

STEP 4Press the [Start] key.

▲

STEP 5When scanning of the document is complete, the scanner goes into

Ready Mode. If you wish to scan another document, repeat steps 3

and 4.

To finish scanning, press the [Stop] key.

▲

SCANNING BASICS

STEP 1Set [Scanning Side] and [Feeding Option] in the ISIS/TWAIN driver.

▲

AUTOMATIC FEEDING

STEP 2From the application you are using, execute the required command to

start scanning. The [Start] key lamp will turn green.

▲

STEP 3Load the document into the document feeder tray. Scanning will start

automatically when the sensor on the document feeder tray detects

the document.

▲

STEP 4When scanning of the document is complete, the scanner goes into

Ready Mode. If you wish to scan another document, repeat step 3.

To finish scanning, press the [Stop] key.

▲

SCANNING BASICS

USING THE JOB MODE

Job functions provide an easy way to scan documents to specific

folders, printers, and e-mail addresses.

For further details on the Job function, refer to Chapter 4.4 of the DR-7080C

Instructions manual.

STEP 2Use the Job [▲] and [▼] keys to select the number of the job (01

through 99) you want.

▲

STEP 3Place the document on the scanner.

▲

STEP 4Press the [Start] key.

When scanning of the document is complete, press the [Stop] key to exit the Job Mode.

▲

STEP 1Press the Job [▲] key to enter the Job Mode.

▲

Other manuals for ImageFormula DR-7080C

Table of contents

Other Canon Scanner manuals

Canon

Canon IMAGE FORMULA DR-6010C Instructions for use

Canon

Canon 700F - CanoScan LiDE User manual

Canon

Canon N670U - CanoScan Flatbed Scanner User manual

Canon

Canon 8600F - CanoScan User manual

Canon

Canon imageFORMULA CR-80 User manual

Canon

Canon imageFORMULA DR-M140II User manual

Canon

Canon ImageFormula R10 User manual

Canon

Canon imageFORMULA ScanFront 300 User manual

Canon

Canon 4400F - CanoScan - Flatbed Scanner User manual

Canon

Canon imageFormula DR-C225W Instruction manual

Canon

Canon DR-9050C - imageFORMULA - Document Scanner User manual

Canon

Canon DR-X10C - imageFORMULA - Document Scanner Instructions for use

Canon

Canon imageFORMULA DR-M260 User manual

Canon

Canon DR-S130 User manual

Canon

Canon DR-X10C - imageFORMULA - Document Scanner User manual

Canon

Canon DR-5020 User manual

Canon

Canon imageFORMULA DR-M160II User manual

Canon

Canon imageFORMULA DR-2010M User manual

Canon

Canon imageFORMULA DR-C225 2 User manual

Canon

Canon DR 5010C - imageFORMULA - Document Scanner User manual

Canon

Canon 5600F - CanoScan - Flatbed Scanner User manual

Canon

Canon CANOSCAN FB330 series User manual

Canon

Canon imageFORMULA DR-7580 User manual

Canon

Canon imageFORMULA DR-2580C User manual

Popular Scanner manuals by other brands

Plustek

Plustek Scanner user guide

Z/I Imaging

Z/I Imaging PhotoScan 2001 instructions

Renkforce

Renkforce DS100-5M operating instructions

Image Access

Image Access WideTEK A2 Operation manual

Fujitsu

Fujitsu FI-4860C2 Specifications

GeoSlam

GeoSlam ZEB Horizon Hardware guide

Kodak

Kodak i5800 Scanner Brochure & specs

Kodak

Kodak i7300 user guide

Revopoint

Revopoint POP user manual

Fujitsu

Fujitsu fi-4860C installation guide

Eddyfi Technologies

Eddyfi Technologies Floormap X user manual

Faselase

Faselase F6 user manual

Fujitsu

Fujitsu CardMinder user guide

Uniden

Uniden BC340CRS owner's manual

Infinite Peripherals

Infinite Peripherals INFINEA TAB M user manual

Mustek

Mustek PageExpress 4800 Pro user guide

Optex

Optex 750830 owner's manual

Innova

Innova 5210 user manual