Canon PIXMA MP630 User manual

Getting Started

Make sure to read this manual before using the machine. Please keep it in hand for future reference.

MP630

Symbols■

The following symbols are used to mark important instructions. Observe these instructions.

Instructions that, if ignored, could result in personal injury or material damage.

Instructions that must be observed for safe operation.

Additional explanations.

Descriptions for operations that take some time to complete.

Microsoft is a registered trademark of Microsoft Corporation.

Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other countries.

Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

•

•Model Number: K10326(MP630)

Contents

Check the Included Items

Turn the Power On

Install the Print Head

Install the Ink Tanks

Align the Print Head

Install the Software

Loading Paper

After Installing the Machine

12 3 4 5 6 7

(C)

(B)

(A)

Check the Included Items

(B) 8cm CD-R adapter

Manuals

Setup CD-ROM

(containing the drivers, applications and

on-screen manuals)

Warranty

MP-101 paper

(for Automatic Print Head Alignment)

•

Before turning on the machine, remove all the orange tapes and the protective sheets.•

Open the Paper Output Tray with your hands, and take out the Print Head.

The Print Head is placed inside of the Paper Output Tray (A).

ink tank

Print Head

power cord

A USB cable is necessary to connect the machine with your computer.•

12 3 4 5 6 7

(1)

(2)

(A)

(B)

(C)

(D)

Turn the Power On

Make sure that the Document Cover (C) is closed.•

Do NOT connect the USB cable at this

stage.

•

Plug in the power cord on the left

side at the back of the machine and

connect the other end to the wall

outlet.

Open the Operation Panel (A) then, press the ON button (B)

to turn on the machine.

Use the

{ or }

button (D) on the

Operation Panel to select the language for

the LCD, then press the OK button. The

standby screen is displayed.

The machine may make some operating noises. This is normal

operation.

•

If an unintended language is displayed on

the LCD, press the Back button on the

Operation Panel to return to the Language

selection screen.

•

(A)

(B)

(C)

(D)

Install the Print Head

Close the Document Cover and lift it with the Scanning

Unit (Cover).

• Firmly raise the Print Head Lock Lever until it stops. (The Print

Head Lock Lever may feel heavy.)

•

If the Print Head Holder does not move, make sure that the

machine is turned on.

•

Open the Paper Output Tray (A), then lift the

Scanning Unit (Cover) (B) until it locks into place.

Raise the Print Head Lock Lever (D).

The Scanning Unit (Cover) (B) is fixed automatically.

The Print Head Holder (C) comes out. (This is where you

install the Print Head.)

Do not handle the Print Head

roughly such as applying them

excessive pressure or dropping

them.

•

The Print Head Holder makes a noise as it moves.

This is normal operation.

•

1 2 34 5 6 7

(D)

Remove the Print Head from

the silver package.

Remove and discard the orange

protective cap.

Tilt the Print Head and set it in place. Lower the Print Head Lock

Lever (D) completely.

There may be some transparent or light blue ink on the inside of the bag the Print

Head comes in, or the inside of the protective cap - this has no effect on print quality.

Be careful not to get ink on yourself when handling these items. Be careful not to stain

your hands.

•

Do not knock the Print Head against the sides of the Holder.

Be sure to install it in a well-lit environment.

Pinch the Print Head Lock Lever  rmly and lower it gently.

Once you have installed the Print Head, do not remove it unnecessarily.

•

(1)

(2)

(A)

Install the Ink Tanks

Do not hold the sides of the ink tank; ink may splash.•

Pull the orange tape (1) in the

direction of the arrow to peel off the

protective film and remove the film

(2) completely.

If the Print Head Holder moves to the right,

close and reopen the Scanning Unit (Cover).

Be sure to use the supplied ink tanks.

•

Do not handle the ink tanks roughly such as

applying them excessive pressure or dropping

them.

•

While pressing down with your left thumb, twist off the

orange protective cap (A) located on the bottom of the ink

tank.

5 61 2 3 47

Install all the other ink tanks in the same way.

Wait until the screen above appears (about 6

minutes) and go to the next step.

The machine may make some operating

noises when preparing to print. This is

normal operation.

•

Install all the ink tanks.

Close the Scanning Unit (Cover).

Make sure all the Ink lamp lights red.•

Once you have installed the ink tanks, do not

remove them unnecessarily.

•

If an error message is displayed on the LCD,

make sure that the Print Head and the ink tanks

are correctly installed.

•

Press the PUSH mark on the ink tank until it

clicks into place.

Make sure the Ink lamp lights red.

Install the Ink Tank

Be sure to install it in a well-lit environment.•

Match the labels when installing.•

(A)

(B) (B)

(D)

(C)

Align the Print Head

Align the Print Head for better print results.

This takes about 7 minutes.

Use a sheet of supplied speciality paper

(MP-101) for alignment.

Open the Paper Support

(A) and pull it out.

Load a sheet of supplied speciality paper

(MP-101) in the Rear Tray (D).

Move the Paper Guides

(B) to both edges.

For details, refer to "7 Loading Paper" on page

21.

•

Be sure to use the supplied speciality paper

(MP-101) for Automatic Print Head Alignment.

MP-101 cannot be fed from the Cassette. Load

it in the Rear Tray.

MP-101 has the front and back sides. Load it

with the whiter side facing up.

•

Make sure that the

Output Tray Extension

•

Table of contents

Other Canon Printer manuals

Canon

Canon LBP7010C User manual

Canon

Canon imagePROGRAF iPF6350 User manual

Canon

Canon PIXMA MG5600 Series Setup guide

Canon

Canon imagePROGRAF IPF9100 User manual

Canon

Canon iP6700D - PIXMA Color Inkjet Printer User manual

Canon

Canon MX490 Series Quick start guide

Canon

Canon CLC 3220 Installation and maintenance instructions

Canon

Canon TS9550 Series Setup guide

Canon

Canon MF832Cdw User manual

Canon

Canon imageCLASS LBP6300dn User manual

Canon

Canon MP560 - PIXMA Color Inkjet Manual

Canon

Canon LBP654C Series User manual

Canon

Canon MG2100 Series Instructions for use

Canon

Canon MAXIFY GX4000 Series Setup guide

Canon

Canon imageCLASS MF4890dw Service manual

Canon

Canon iPF8000S - imagePROGRAF Color Inkjet Printer User manual

Canon

Canon PIXMA MX432 User manual

Canon

Canon PIXMA G3260 Setup guide

Canon

Canon LBP5000 Series User manual

Canon

Canon Pixma TS7700 Series Setup guide

Canon

Canon iR C6800 Series User manual

Canon

Canon iP3300 - PIXMA Color Inkjet Printer User manual

Canon

Canon PIXMA iP6000D User manual

Canon

Canon Pixma G3060 Series User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Samsung

Samsung BIXOLON SRP-350plusF user manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual

Epson

Epson Stylus Photo PX700W Basic operation guide

Ricoh

Ricoh SP204SF user guide

Star Micronics

Star Micronics futurePRNT TSP100 Hardware manual

Epson

Epson TM-TM88V-i Technical reference guide