Canon BJC-6200 User manual

QY8-1370-000

REVISION 0



2000 CANON INC. CANON BJC-6200 0400 AB 0.20-0 PRINTED IN JAPAN (IMPRIME AU JAPON)

Apr. 2000

042000 AB 0.20-0

Application

This manual has been issued by Canon Inc. for qualified persons to learn technical theory, installation, maintenance, and repair

of products. This manual covers all localities where the products are sold. For this reason, there may be information in this

manual that does not apply to your locality.

Corrections

This manual could include technical inaccuracies or typographical errors due to improvements or changes in the products.

When changes occur in applicable products or in the content of this manual, Canon will release technical information as the

need arises. In the event of major changes in the contents of this manual over a long or short period, Canon will issue a new

editions of this manual

The following paragraph does not apply to any countries where such provisions are inconsistent with local

law.

Trademarks

The product names and company names described in this manual are the registered trademarks of the individual companies.

translated into another language, in whole or in part, without the written consent of Canon Inc., except in the case of internal

business use.



2000 by Canon Inc.

CANON INC.

BJ Printer Technical Support Dept. 11

16-1, Shimonoge 3-chome, Takatsu-ku, Kawasaki, Kanagawa 213-8512, Japan

This manual has been produced on an Apple Power Macintosh 7300/180 personal computer and OKI MICROLINE 803 PSIIV

laser beam printer; artworks of printing films were printed on Agfa SelectSet Avantra 25. All page layouts, logos, and parts-list

data were saved with Canon Optical Disc Subsystem mo-5001S™ and Optical Disc Cartridge mo-502M™, and Interface Kit

mo-IF2™ for Macintosh. All graphics were produced with MACROMEDIA FREEHAND™ 7.0J. All documents and all page

layouts were created with QuarkXpress™ 3.3 Japanese version.

I. ABOUT THIS MANUAL

This manual consists of three parts containing information for servicing the product.

Part 1: Product Specifications

Product overview and specifications.

Part 2: Troubleshooting

A guide to troubleshooting the product and identifying the parts and units needing replacement.

Troubleshooting is described according to problem descriptions as well as error indications by the status

indicator.

Part 3: Appendix

Block diagrams, information on the hardware technologies, and pin configurations.

Disassembly and reassembly procedures are not fully covered in this manual. Refer to the

separate

Parts Catalog

instead.

Product

Specifications Troubleshooting Appendix

II. TABLE OF CONTENTS

Page

Part 1:

PRODUCT SPECIFICATIONS

1 - 1 1. PRODUCT OUTLINE

1 - 1 1.1 Product Outline

1 - 2 2. SPECIFICATIONS

1 - 2 2.1 Printer Specifications

1 - 2 2.1.1 Printer specifications

1 - 2 2.1.2 Printer service life

1 - 3 2.2 Paper Specifications

1 - 3 2.2.1 Paper sizes and weights

1 - 3 2.2.2 Paper types and handling

1 - 4 2.2.3 Printable area

1 - 4 2.3 BJ Cartridge Specifications

1 - 5 2.4 Optional Scanner Cartridge Specifications

1 - 5 2.4.1 Scannable area

1 - 6 2.5 Printer and Scanner Drivers

1 - 7 3. PACKING CONFIGURATION

1 - 8 4. PARTS CODE LIST

Part 2: TROUBLESHOOTING

2 - 1 1. PRINTER OPERATION

2 - 1 1.1 Status Indicator

2 - 1 1.1.1 Status display via the indicator

2 - 2 2. SERVICING

2 - 2 2.1 Before Troubleshooting

2 - 3 2.2 Detectable Problems from System Start to Exit

2 - 6 2.3 Troubleshooting Problems

2 - 7 2.4 Troubleshooting With Error Indications

2 -10 3. DISASSEMBLY AND REASSEMBLY

2 -10 3.1 Cautions for Disassembly and Reassembly

2 -10 3.1.1 Ink stains (Ink path/ink mist)

2 -10 3.1.2 Static electricity damage

2 -10 3.1.3 Spur tips deformation

2 -10 3.1.4 Feed gear damage

2 -10 3.1.5 Tap screw removal and installation

2 -11 3.2 Exploded View

2 -13 3.3 Disassembly and Reassembly

2 -13 3.3.1 Carriage lock release

2 -13 3.3.2 Removing and installing tap screws

2 -14 3.3.3 Removing the upper cover unit

2 -14 3.3.4 Removing the printer unit

2 -15 3.3.5 Removing the pressure roller unit

2 -15 3.3.6 Spur positions on the spur base unit

2 -16 3.3.7 Removing the ASF unit

2 -16 3.3.8 Removing the head gap adjustment section

2 -17 3.4 Adjustments and Settings After Disassembly and Reassembly

2 -17 3.4.1 Adjustments

2 -18 3.4.2 Applying grease

2 -19 3.4.3 Print head position adjustment

2 -20 3.4.4 Setting the EEPROM

2 -20 3.4.5 Adjusting the carriage belt tension

2 -21 3.4.6 Adjusting the head gap

Page

2 -23 4. OPERATION CHECK AFTER DISASSEMBLY AND REASSEMBLY

2 -23 4.1 Check Procedure

2 -24 5. TRANSPORTING THE PRINTER

2 -24 5.1 Preparation for Transport

2 -25 6. PARTS REPLACEMENT, PERIODIC INSPECTIONS, & TOOLS

2 -25 6.1 Parts Replacement

2 -25 6.2 Periodic Inspections

2 -25 6.3 Tool List

2 -26 6.4 Operation with the Printer's Operation Panel

2 -26 6.4.1 Cleaning

2 -26 6.4.2 Printing the nozzle check pattern

2 -27 6.4.3 Roller cleaning

2 -28 7. SERVICE-RELATED FEATURES

2 -28 7.1 Service Mode Operations

2 -29 7.2 Service/Factory Test Printout

2 -30 7.3 Printing the EEPROM Information

2 -31 7.4 Resetting the EEPROM

2 -31 7.5 Setting the Model with the EEPROM

2 -31 7.6 Ink Availability Check

2 -31 7.7 Auto Print Head Position Adjustment

2 -31 7.8 Power Off/Carriage Lock

Part 3: APPENDIX

3 - 1 1. TECHNICAL REFERENCE

3 - 1 1.1 Print Mode List

3 - 2 1.2 Purge Unit's Capping and Cleaning Functions

3 - 2 1.3 Cautions About the Inks

3 - 3 1.4 Operation with a Computer

3 - 3 1.4.1 Setting functions with the printer driver

3 - 4 1.5 Detection Functions by Sensors

3 - 5 1.6 Electronic Circuit Description

3 - 5 1.6.1 Circuit block diagram

3 - 5 1.6.2 Power source line block diagram

3 - 6 2. CONNECTOR LOCATIONS AND PIN CONFIGURATIONS

3 -10 2.1 Carriage Board

3 -11 2.2 BJ Cartridge

3 -12 2.3 Scanner Cartridge (Optional)

3 -13 2.4 AC Adapter

3 -13 2.5 DC Power Cable

3 -14 2.6 Carriage Motor

3 -14 2.7 Paper Feed Motor

3 -14 2.8 ASF Motor

3 -15 2.9 Ink Sensor

3 -15 2.10Printing Position Sensor

3 -15 2.11Purge Sensor Connector

3 -17 2.12Circuit Diagrams

III

III. ILLUSTRATION INDEX

Page

Part 1:

PRODUCT SPECIFICATIONS

1 - 1 Figure 1 - 1 Printer Appearance

1 - 4 Figure 1 - 2 Printable Area

1 - 5 Figure 1 - 3 Scannable Area

1 - 7 Figure 1 - 4 Packing Configuration

Part 2: TROUBLESHOOTING

2 - 1 Figure 2 - 1 Operation Panel

2 -11 Figure 2 - 2 Exploded View

2 -13 Figure 2 - 3 Carriage Lock Release

2 -14 Figure 2 - 4 Upper Cover Unit Removal and Installation

2 -14 Figure 2 - 5 Removing the Printer Unit

2 -15 Figure 2 - 6 Removing the Pressure Roller Unit

2 -15 Figure 2 - 7 Spur Positions on the Spur Base Unit (Bottom View)

2 -16 Figure 2 - 8 Removing the ASF Unit

2 -16 Figure 2 - 9 Carriage Shaft Position Adjustment Bearing

2 -18 Figure 2 -10 Applying Grease

2 -19 Figure 2 -11 Print Position Adjustment Pattern

2 -20 Figure 2 -12 Carriage Belt Tension Adjustment

2 -21 Figure 2 -13 Head Gap Adjustment 1

2 -22 Figure 2 -14 Head Gap Adjustment 2

2 -27 Figure 2 -15 Nozzle Check Pattern Printout (Color Sample)

2 -29 Figure 2 -16 Service/Factory Test Printout (Sample)

2 -30 Figure 2 -17 EEPROM Information Printout (Sample)

Part 3: APPENDIX

3 - 3 Figure 3 - 1 Printer Driver Utilities (Sample)

3 - 4 Figure 3 - 2 Sensor Locations

3 - 5 Figure 3 - 3 Block Diagram

3 - 5 Figure 3 - 4 Power Source Line Block Diagram

3 - 6 Figure 3 - 5 Control Board

3 - 6 Figure 3 - 6 Printer Diagram

3 -10 Figure 3 - 7 Carriage Board

3 -11 Figure 3 - 8 BJ Cartridge

3 -12 Figure 3 - 9 Scanner Cartridge

3 -13 Figure 3 -10 AC Adapter

3 -13 Figure 3 -11 DC Power Cable

3 -14 Figure 3 -12 Carriage Motor

3 -14 Figure 3 -13 Paper Feed Motor

3 -14 Figure 3 -14 ASF Motor

3 -15 Figure 3 -15 Ink Sensor

3 -15 Figure 3 -16 Print Position Sensor

3 -15 Figure 3 -17 Purge Sensor

IV. TABLE INDEX

Page

Part 1: PRODUCT SPECIFICATIONS

1 - 8 Table 1- 1 PARTS CODE LIST

Part 2: TROUBLESHOOTING

2 - 7 Table 2- 1 ERROR INDICATIONS

Part 3: APPENDIX

3 - 1 Table 3- 1 PRINT MODE LIST

3 - 2 Table 3- 2 INK CONSUMPTION DURING CLEANING (GENERAL GUIDE)

Other manuals for BJC-6200

Table of contents

Other Canon Printer manuals

Canon

Canon BJC-S520 User manual

Canon

Canon MG 2520 User manual

Canon

Canon LBP 2900i User manual

Canon

Canon PIXMA TS702a User manual

Canon

Canon imageCLASS MF269dw User manual

Canon

Canon image Prograf iPF680 Series User manual

Canon

Canon iPF720 - imagePROGRAF Color Inkjet Printer User manual

Canon

Canon iPF655 - imagePROGRAF Color Inkjet Printer User manual

Canon

Canon ZV-223 User manual

Canon

Canon imageRUNNER LBP3580 User manual

Canon

Canon PIXMA TS3522 Setup guide

Canon

Canon PIXMA MX922 User manual

Canon

Canon imagePROGRAF iPF825 MFP Basic Guide No.1 User manual

Canon

Canon imageCLASS D600s User manual

Canon

Canon PIXMA iX4000 User manual

Canon

Canon LBP673Cdw User manual

Canon

Canon S100SP User manual

Canon

Canon iP1500 - PIXMA Color Inkjet Printer User manual

Canon

Canon i-SENSYS MF6180dw Installation and user guide

Canon

Canon TM-5300 Setup guide

Canon

Canon imageCLASS MF8450c Assembly instructions

Canon

Canon BJ-200EX User manual

Canon

Canon GX7050 User manual

Canon

Canon imageGLASS X LBP 1238 II User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Samsung

Samsung BIXOLON SRP-350plusF user manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

IRA3D

IRA3D POETRY4 Original instructions

Ricoh

Ricoh Aficio AP400 operating instructions

BIXOLON

BIXOLON SRP-352plusV user manual

Epson

Epson Stylus Photo PX700W Basic operation guide

Ricoh

Ricoh SP204SF user guide

Star Micronics

Star Micronics futurePRNT TSP100 Hardware manual

Epson

Epson TM-TM88V-i Technical reference guide