Canon REBEL SL1 EOS 100D User manual

CaHOH

Handy Features

Disabling the Beeper (p.216)

Card Reminder (p.216)

Setting the Image Review Time (p.217)

Setting the Auto Power-off Time (p.217)

Adjusting the LCD Monitor Brightness (p.218)

Creating and Selecting a Folder (p.219)

File Numbering Methods (p.221)

Setting Copyright Information (p.223)

Auto Rotation of Vertical Images (p.225)

Checking Camera Settings (p.226)

Reverting the Camera to the Default Settings (p.227)

Preventing the LCD Monitor from Turning Off Automatically

(p.230)

Changing the Shooting Settings Screen Color (p.230)

Setting the Flash (p.231)

Automatic Sensor Cleaning (p.236)

Appending Dust Delete Data (p.237)

Manual Sensor Cleaning (p.239)

Handy Features

You can prevent the beeper from sounding when focus is achieved,

during self-timer operation, and during touch screen operations.

Under the [1_1] tab, select [Beep], then

press <SET>. Select [Disable], then

press <SET>.

To silence the beeper only during touch

screen operations, select [Touch to ,_].

This setting prevents shooting if there is no card in the camera.

Under the [1_1] tab, select [Release

shutter without card], then press

<SET >. Select [Disable], then press

<SET>.

If there is no card inserted in the camera

and you press the shutter button, "Card"

will be displayed in the viewfinder, and

you cannot release the shutter.

216

Handy Features

You can set how long the image is displayed on the LCD monitor

immediately after capture. If [Off] is set, the image will not be displayed

immediately after image capture. If [Hold] is set, the image review will

be displayed up until the [Auto power off] time.

During image review, if you operate any camera controls such as

pressing the shutter button halfway, the image review will end.

Under the [1_11] tab, select [Image

review], then press <SET>. Select the

desired setting, then press <SET >.

To save battery power, the camera turns off automatically after the set

time of idle operation elapses. You can set this auto power-off time.

When the camera has turned off due to auto power off, you can turn it

on again by pressing the shutter button halfway or pressing any of the

following buttons: <MENU>, <INFO.>, <r-€-1>,<1:_11>,etc.

If [Disable] is set, either turn off the camera or press the <INFO.>

button to turn off the LCD monitor to save battery power.

Even when [Disable] is set, if the camera is not used for 30 min.,

the LCD monitor will turn off automatically. To turn on the LCD

monitor again, press the <INFO.> button.

Under the [_'2] tab, select [Auto power

off], then press <SET>. Select the

desired setting, then press <SET >.

217

Handy Features

You can adjust the brightness of the LCD monitor to make it easier to

read.

Under the [_'2] tab, select [LCD

brightness], then press <SET>. Press

the < _1>< I_ > keys to adjust the

brightness on the adjustment screen,

then press <SET>.

When checking the exposure of an

image, set the LCD monitor brightness to

4 and prevent the ambient light from

affecting the reviewed image.

218

Handy Features

You can freely create and select the folder where the captured images

are to be saved.

This operation is optional since a folder will be created automatically for

saving captured images.

Creating a Folder

Select [Select folder].

Under the [_,1] tab, select [Select

folder], then press <SET>.

..........; Select [Create folder].

Select [Createfolder], thenpress

<SET>.

iiii!!ii!!!!ii iiiii

Create a new folder.

Select [OK], then press <SET>.

Anew folder with the folder number

increased by one is created.

219

Handy Features

Selecting a Folder

Lowest file number

Numberof imagesin folder

FOlder name

With the folder selection screen

displayed, select a folder and press

<SET>.

The folder where the captured

images will be saved is selected.

Subsequent captured images will be

recorded into the selected folder.

Highest file number

_] Folders

As with "100CANON" for example, the folder name starts with three digits

(the folder number) followed byfive alphanumeric characters. Afolder can

contain up to 9999 images (file number 0001 - 9999). When a folder

becomes full, a new folder with the folder number increased by one is

created automatically. Also, if manual reset (p.222) is executed, a new

folder will be created automatically. Folders numbered from 1go to 999 can

be created.

Creating Folders with a Computer

With the card open on the screen, create a new folder named "DClM'. Open

the DCIM folder and create as many folders as necessary to save and

organize your images. The folder name must follow the format

"100ABC_D". The first three digits are the folder number, from 100 to 999.

The final five characters can be any combination of upper- and lower-case

letters from Ato Z, numerals, and the underscore "_". The space cannot be

used. Also note that two folder names cannot share the same three-digit

folder number (for example, "100ABC_D" and "100W_XYZ'), even if the

other five characters in each name are different.

220

Handy Features

The image files will be numbered from 0001 to 9999 in the order the

images are taken, then saved in a folder. You can change how the file

number is assigned.

The file number will appear on your computer in this format:

IMG OOOl.JPG.

Under the [t'l] tab, select [File

numbering], then press <SET>. The

available settings are described below.

Select the option, then press <SET>.

[Continuous]: The file numbering continues in sequence even

after you replace the card or create a folder,

Even after you replace the card or create a new folder, the file

numbering continues in sequence up to 9999. This is convenient

when you want to save images numbered anywhere between 0001

to 9999 in multiple cards or folders into one folder in your computer.

If the replacement card or existing folder already contains images

recorded previously, the file numbering of the new images may

continue from the file numbering of the existing images on the card

or in the folder. If you want to use continuous file numbering, it is

recommended that you use a newly-formatted card each time.

File numbering after

replacing the card

Next sequential file number

File numberingafter

creating afolder

221

Handy Features

[Auto reset]: The file numbering restarts from 0001 each time

the card is replaced or a new folder is created,

When you replace the card or create a folder, the file numbering

restarts from 0001 for the new images saved. This is convenient if

you want to organize images according to cards or folders.

If the replacement card or existing folder already contains images

recorded previously, the file numbering of the new images may

continue from the file numbering of the existing images on the card

or in the folder. If you want to save images with the file numbering

starting from 0001, use a newly formatted card each time.

File numbering after File numbering after

replacing the card creating a folder

Filenumberingisreset

[Manual reset]: To reset the file numbering to 0001 manually or

to start from file number 0001 in a new folder,

When you reset the file numbering manually, a new folder iscreated

automatically and the file numbering of images saved to that folder

starts from 0001.

This is convenient if you want to use different folders for the images

taken yesterday and the ones taken today, for example. Af[er the

manual reset, the file numbering returns to continuous or auto reset.

(There will be no manual reset confirmation screen.)

If the file number in folder 999 reaches 9999, shooting wilt not be possible

even if the card still has storage capacity. The LCD monitor will display a

message telling you to replace the card. Replace it with a new card.

For both JPEGand RAW images,thefile name will start with "IMG_". Movie

file names will start with "MVI ". The extensionwilt be ".JPG" for JPEG

images, ".CR2"for RAW images, and ".MOV" for movies.

222

Handy Features

When you set the copyright information, it will be appended to the

image as Exif information.

Select [Copyright information].

Under the [_'4] tab, select [Copyright

information], then press <SET >.

Select the option to be set.

Select [Enter author's name] or

[Enter copyright details], then press

<SET>.

The text entry screen will appear.

Select [Display copyright info.] to

check the copyright information

currently set.

Select [Delete copyright

information] to delete the copyright

information currently set.

Entertext.

Refer to "Text Entry Procedure" on

the next page and enter the copyright

information.

Enter up to 63 alphanumeric

characters and symbols.

.... Exit the setting.

After entering the text, press the

<MENU> button to exit.

On the confirmation dialog, select

[OK], then press <SET>.

223

Other manuals for REBEL SL1 EOS 100D

This manual suits for next models

Table of contents

Other Canon Digital Camera manuals

Canon

Canon EOS 70D User manual

Canon

Canon PowerShot SD430 DIGITAL ELPH WIRELESS User manual

Canon

Canon EOS REBEL T6i Technical specifications

Canon

Canon PowerShot S80 User Guide Advanced User manual

Canon

Canon PowerShot G9X User manual

Canon

Canon PowerShot N100 User manual

Canon

Canon PowerShot S1IS User manual

Canon

Canon VIXIA HF R300 User manual

Canon

Canon PowerShot G7X User manual

Canon

Canon EOS 7D Mark II (G) User manual

Canon

Canon EOC-1DX User manual

Canon

Canon EOS 600D User manual

Canon

Canon ELPH Z3 User manual

Canon

Canon EOS 700D User manual

Canon

Canon PowerShot G2 (PC1015) User manual

Canon

Canon EOS 5D Mark III User manual

Canon

Canon Powershot SX40 HS User manual

Canon

Canon PowerShot SX410 IS User manual

Canon

Canon PowerShot ELPH 310 HS User manual

Canon

Canon F1N Camera User manual

Canon

Canon WP-DC54 User manual

Canon

Canon IXUS 115 HS User manual

Canon

Canon WP-DC27 User manual

Canon

Canon PowerShot SD580 IS User manual

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Nikon

Nikon Coolpix 100 user manual