Canon PowerShot N100 User manual
Getting Started ENGLISH
CEL-SV4PA210
CEL-SV4PA20
2
Package Contents
Package Contents
Before use, make sure the following items are included in the package.
If anything is missing, contact your camera retailer.
Camera Battery Pack
NB-12L
Battery Charger
CB-2LG/CB-2LGE
Wrist Strap* Getting Started
(this guide)
Warranty System Booklet
* For attachment instructions, refer to the Camera User Guide. See the next page for
download instructions.
• A memory card is not included.
Compatible Memory Cards
No memory card is included. Purchase one of the following kinds of card
as needed. These memory cards can be used, regardless of capacity. For
details on the number of shots and recording time per memory card, see
“Specifications” in the downloadable Camera User Guide.
• SD memory cards*1
• SDHC memory cards*1*2
• SDXC memory cards*1*2
*1 Cards conforming to SD standards. However, not all memory cards have been
verified to work with the camera.
*2 UHS-I memory cards are also supported.
3
Manuals and Software
Manuals and Software
You can download manuals and software from the following URL:
http://www.canon.com/icpd/
With a computer connected to the Internet, access the
above URL.
Access the site for your country or region.
For instructions on how to install the software, refer to
the Camera User Guide available for download.
Adobe Reader is required to view the manuals.
Camera User Guide
This manual covers the following topics:
Basic instructions, from initial preparations to shooting and playback
Instructions on sending images and using Web services via Wi-Fi
Instructions on installing the software and importing images
Other instructions, about all camera features
Software Instruction Manual
This manual describes how to use the software.
Initial Preparations
Initial Preparations
Charging the Battery Pack
1 Insert the battery pack.
After aligning the marks on the battery
pack and charger, insert the battery pack
by pushing it in ( ) and down ( ).
2 Charge the battery pack.
Plug the power cord into the charger, then
plug the other end into a power outlet.
The charging lamp turns orange, and
charging begins.
4
Initial Preparations
When charging is finished, the lamp turns
green. Remove the battery pack.
For details on charging time and the
number of shots or recording time
available with a fully charged battery
pack, refer to “Specifications” in the
downloadable Camera User Guide.
Inserting the Battery Pack and Memory Card
1 Open the cover.
Slide the cover ( ) and open it ( ).
2 Insert the battery pack.
While pressing the battery lock in the
direction of the arrow, insert the battery
pack as shown and push it in until it clicks
into the locked position.
To remove the battery pack, press the
battery lock in the direction of the arrow.
3 Check the card’s write-protect
tab and insert the memory card.
Recording is not possible on memory
cards with a write-protect tab when the
tab is in the locked position. Slide the tab
to the unlocked position.
Insert the memory card facing as shown
until it clicks into the locked position.
To remove the memory card, push it in
until you feel a click, and then slowly
release it.
Terminals Battery
Lock
Terminals
5
Initial Preparations
4 Close the cover.
Lower the cover ( ) and hold it down as
you slide it, until it clicks into the closed
position ( ).
Setting the Date and Time
1 Turn the camera on.
Press the ON/OFF button.
The [Date/Time] screen is displayed.
2 Set the date and time.
Press the <q><r> buttons to choose an
option.
Press the <o><p> buttons to specify
the date and time.
When finished, press the <m> button.
3 Set the home time zone.
Press the <q><r> buttons to choose
your home time zone.
Press the <m> button when finished.
After a confirmation message, the setting
screen is no longer displayed.
To turn off the camera, press the ON/OFF
button.
6
Initial Preparations
Changing the Date and Time
To adjust the date and time once you have set it, do the following.
1 Press the <n> button.
2 Move the zoom lever to choose the [3] tab.
3 Press the <o><p> buttons to choose [Date/Time], and then press the
<m> button.
4 Follow step 2 in “Setting the Date and Time” to adjust the settings.
5 Press the <n> button.
Display Language
Change the display language as needed.
1 Enter Playback mode.
Press the <1> button.
2 Access the setting screen.
Press and hold the <m> button, and
then immediately press the <n>
button.
Press the <o><p><q><r> buttons to
choose a language, and then press the
<m> button.
7
Trying the Camera Out
Trying the Camera Out
Shooting
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
1 Turn the camera on and enter
[] mode.
Press the ON/OFF button.
Set the mode switch to [4].
2 Compose the shot.
To zoom in and enlarge the subject, move
the zoom lever toward <i> (telephoto)
as you watch the screen, and to zoom
away from the subject, move it toward
<j> (wide angle).
3 Shoot.
Shooting Still Images
Press the shutter button lightly ( ).
The camera beeps twice after focusing,
and AF frames are displayed to indicate
image areas in focus. Press the shutter
button all the way down ( ).
If [Raise the flash] appears on the screen,
move the <h> switch to raise the flash. It
will fire when shooting. If you prefer not
to use the flash, push it down with your
finger, into the camera.
Shooting Movies
Press the movie button to start shooting,
and press it again to stop.
8
Trying the Camera Out
Viewing
1 Enter Playback mode.
Press the <1> button.
2 Browse through your images.
To view the previous or next image, press
the <q><r> buttons.
Movies are identified by a [ ] icon.
To play movies, go to step 3.
3 Play movies.
Press the <m> button, press the
<o><p> buttons to choose [ ], and
then press the <m> button again.
Playback now begins, and after the movie
is finished, [ ] is displayed.
To adjust the volume, press the <o><p>
buttons.
Erasing Images
To erase the image you chose in step 2, do the following. Note that erased
images cannot be recovered.
1 Press the <m> button, press the <o><p> buttons to choose [a], and
then press the <m> button again.
2After [Erase?] is displayed, press the <q><r> buttons to choose
[Erase], and then press the <m> button.
9
© CANON INC. 2014 PRINTED IN THE EU
Other manuals for PowerShot N100
1
Table of contents
Other Canon Digital Camera manuals
Canon
Canon PowerShot A5 User manual
Canon
Canon CHDK User manual
Canon
Canon EOS1 Ds MARKII Guide
Canon
Canon EOS C500 User manual
Canon
Canon PowerShot A310 User manual
Canon
Canon PowerShot SX100 IS User manual
Canon
Canon PowerShot SX730 HS User manual
Canon
Canon MARK III EOS-1 DS User manual
Canon
Canon IXUS90IS User manual
Canon
Canon IXUS 265 HS User manual
Canon
Canon PowerShot SX130 IS User manual
Canon
Canon IXUX 240 HS User manual
Canon
Canon EOS 600D User manual
Canon
Canon EOS 100 User manual
Canon
Canon PowerShot A10 User manual
Canon
Canon SD400 - PowerShot Digital ELPH Camera User manual
Canon
Canon EOS C500 Mark II User manual
Canon
Canon Digital IXUS I5 User manual
Canon
Canon EOS Series Instruction Manual
Canon
Canon PowerShot SD870 IS Digital ELPH User manual
