Canon PIXMA MX722 Manual
<< Previous Next >>
Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MX722
Macintosh OS
1
<< Previous Next >>
Installing Your Multifunction to
Additional Computers on Your Network
PIXMA MX722
Macintosh OS
Preparing to Connect My Multifunction to My Network 3
Network Requirements 3
Notes on Wireless Connection 4
Installing the Drivers 5
2
Preparing to Connect My Multifunction
To My Network << Previous Next >>
Network Requirements
Before connecting the machine to the network, make sure that configuration of the computer and access point or router is
complete, and that the computer is connected to the network.
Wireless Connection
Before connecting the machine to the network, the computer needs to be connected to the network. Make sure that
configuration of the computer and access point or router is complete.
3
Preparing to Connect My Multifunction
To My Network << Previous Next >>
4
Notes on Network Connection
•The configuration, router functions, setup procedures and security settings of
the network device vary depending on your system environment. For details,
refer to your device's instruction manual or contact its manufacturer.
•In an office setup, consult your network administrator
•If you connect to a network that is not protected with security measures, there
is a risk of disclosing data such as your personal information to a third party.
•If an error message appears or if you have trouble with the network
connection, refer to the printed manual: Network Setup Troubleshooting.
•Place the machine and computer on the same network segment.
An "Ad-hoc connection," which establishes a direct
connection to the computer over a wireless connection
without using an access point, is not supported.
Software Installation
To use the machine by connecting it to a computer, software including the drivers needs to be copied (installed) to the computer's hard disk.
(The installation time varies depending on the computer environment or the number of application software to be installed.)
Installing the Drivers & Software
5
IMPORTANT
•Log on as the administrator (or a member of the Administrators group).
•Quit all running applications before installation.
•Do not switch users during the installation process.
•Internet connection may be required during the installation. Connection fees may apply. Consult the internet service provider.
•It may be necessary to restart your computer during the installation process. Follow the on-screen instructions and do not remove the
Setup CD-ROM during restarting. The installation resumes once your computer has restarted.
•If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access
the network. If such a warning message appears, set the security software to always allow access.
<< Previous Next >>
Installing the PIXMA MX722 to additional Mac computers on
your Wireless Network
If your MX722 has already been set up on your wireless network , it is only necessary to install the software
on the additional computer(s). No additional settings need to be made on the printer. Network connection
will be confirmed automatically.
Simply insert the Setup CD-ROM that came with your printer into your CD-ROM drive and proceed through
the easy to follow instructions.
Installing the Drivers & Software
6
<< Previous Next >>
7
<< Previous Next >>
1. Insert the CD-ROM into the computer.
2. Double-click the [Setup] icon in the CD-ROM folder, then click [Download] in the subsequent window.
Installing the Drivers & Software
8
<< Previous Next >>
REFERENCE
•When the CD-ROM folder does not open automatically,
double-click the CD-ROM icon displayed on the desktop.
•The screen below is displayed while downloading.
Installing the Drivers & Software
9
<< Previous Next >>
If you click [Cancel] while downloading, you will see the following screen.
- If you click [No], you will return to the screen displayed while downloading.
- If you click [Yes], the download is cancelled. In this case, the files under the download are deleted.
When the download fails, the screen below is displayed.
Click [OK], and you will go back to the screen for downloading in the procedure .
Installing the Drivers & Software
10
<< Previous Next >>
3. When the download is complete, the screen below is displayed. Click [Next].
REFERENCE
Select "Save a file for setting up the software again to the download folder after the installation is complete," and the file will be
saved to the download folder.
Installing the Drivers & Software
Other manuals for PIXMA MX722
3
Table of contents
Other Canon All In One Printer manuals
Canon
Canon MP 1000 User manual
Canon
Canon MultiPASS L60 Mounting instructions
Canon
Canon PIXMA MP530 Manual
Canon
Canon PIXMA MG5420 User manual
Canon
Canon imageCLASS D661 User manual
Canon
Canon CFX-B380 IF User manual
Canon
Canon iR3245 User manual
Canon
Canon imageCLASS MF211 User manual
Canon
Canon MP490 series User manual
Canon
Canon Color imageCLASS MF8350Cdn Safety guide
Canon
Canon MultiPASS MP390 Manual
Canon
Canon imageRunner С1028i User manual
Canon
Canon Color imageRUNNER C5180 Series User manual
Canon
Canon MG3600 series Setup guide
Canon
Canon MultiPASS F50 Manual
Canon
Canon MultiPASS F60 User guide
Canon
Canon imageCLASS MF5770 User manual
Canon
Canon ImageCLASS MF4690 User manual
Canon
Canon PIXMA MP500 User manual
Canon
Canon PIXMA MG3120 User manual
