Canon imageCLASS MPC190 Manual
Setup Sheet
Setup Sheet
Unpack the machine and its components.
Check that you have the following:
NOTE
• A printer cable is not included.You must purchase a USB cable (less than 5 m/16#/8 ft.) to
connect your machine to a computer.
• Please note that the items included with your machine may vary depending on the
country of purchase.
Black
BCI-24
MadeinJapan
BCI-24
MadeinJapan
Color
l
Machine
l
Multi-purpose tray
l
Printhead
l
Ink tanks
(Black, colour)
l
Power cord
l
Documentation
(Setup Sheet, Basic Guide)
l
MultiPASS Suite software CD-ROM
Thank you for purchasing the Canon imageCLASS MPC190.
To get your machine ready for use, please follow the instructions in this Setup Sheet
before referring to any other documentation.
READ THIS SHEET FIRSTREAD THIS SHEET FIRST
Remove the shipping materials.
1Place the machine on a flat surface.
2Remove all shipping tapes from the exterior of the machine.
NOTE
• DO NOT remove the USB label Aat this stage.
Attach and close the multi-purpose tray.
Connect the power cord.
NOTE
• Before turning on the power, make sure the document cover Ais closed.
• Please note that the cartridge (printhead and ink tanks) is installed in steps 5 and 6.
PLEASE WAIT
DISPLAY LANGUAGE
< ENGLISH >
1Plug the power
cord into a socket.
2When you connect the
machine, the above messages
should appear in the LCD.
•If nothing appears in the LCD, press
[ON/OFF] to turn on the machine.
3Use [2] or [3] to
select the language
for the LCD, then
press [OK].
A
USB label A
Load paper.
1Open the multi-purpose tray q,then the tray extension w.
2Place a stack of paper (print side up) in the multi-purpose tray qand adjust the
paper guide Ato the width of the stack w.Make sure the stack does not exceed
the paper limit mark B.
NOTE
• When you are not printing, close the multi-purpose tray.
3Open the paper output tray q,then the tray extension w.
Printouts will exit the machine here.
NOTE
• When you are not printing, you can close the paper output tray.
q
w
AA
q
w
B
w
q
Install the printhead.
IMPORTANT
•To turn off the machine, be sure to always press [ON/OFF].This will ensure that the
printhead is capped and prevent it from drying up.
•If you are not using the machine for a long period of time, we recommend that you
print (in black and colour) or clean the printhead approximately once a month to
maintain the printhead in good working condition.
1Remove the tape q,then open the inner cover w.
• The printhead holder automatically moves to the left of the machine.
IMPORTANT
•Do not try to manually move or
stop the printhead holder.
•Do not touch any metal parts
inside the machine.
•Do not turn off the machine when
opening the inner cover.
2Remove the printhead from its packaging, then remove the orange protective
cap A.
IMPORTANT
• Do not touch the electrical contacts B.
3Raise the lock lever C,then gently slide the printhead into the holder.
Lower the lock lever.
IMPORTANT
• Do not touch the lock lever once the printhead has been installed.
C
B
A
q
w
Turn over to
continue
Turn over to
continue
Install the ink tanks.
1Start with the black ink tank. Remove the ink tank from its packaging, hold it as
shown below, then remove the protective cap A.
NOTE
•Do not shake or drop the ink tank as the ink may leak and
stain your clothes or hands.
•Do not attempt to reattach the protective cap Aonce
you remove it.
•Once you remove the protective cap A,do not touch the
ink port B.
2Insert the black ink tank into the right hand slot. Press firmly on the ink tank‘s tab
until it clicks into place.
3Repeat steps 1 and 2 to install the colour ink tank in the left hand slot.
4Close the inner cover.
Be sure to now align the printhead as explained in step 8.
BCI-24
Color
BCI-24
Black
BCI-24
Black
BCI-24
Black
BCI-24
Ink Tank
Madein Japan
Black
B
A
Align the printhead.
NOTE
• If you will be installing the MultiPASS Suite software, you can also align the printhead
from the software. For details, see p. 8-7 of the Basic Guide.
1When the LCD Adisplays the following, press [OK].
The machine will print a horizontal pattern, and the LCD will display:
2In column A on the printout, note which box has the most solid image. Note the
value next to this box and use [2] or [3] on the operation panel to enter it.
Then press [OK].
3Repeat step 2 for columns B to F.
After finishing the setup, the machine returns to standby mode.
100% A4 TEXT
PLAIN
Ex:
Most solid
box
Least solid
box
BAD
SAMPLE
GOOD
SAMPLE
Column A Value for column A
CHANGE H VALUE
A 0
ALIGN PRINT HEAD
PRESS OK KEY A
Install the software.
IMPORTANT
• DO NOT connect the USB cable before installing the software.
NOTE
• Windows 98/Me users: You need to have “Client for Microsoft Networks“ installed before
installing the MultiPASS Suite software. For details, refer to p. 9-1 of the Basic Guide.
• When installing the software in Windows XP or Windows 2000, log onto the system as a
member of the Administrator group.
• If you have previously installed an earlier version of the MultiPASS Suite software
(version 4.3 or earlier), you must remove it before installing this version. For details on
removing the software, refer to the documentation of the previous version.
1Make sure both your machine and computer are turned on.
2On your computer, close any open applications, including virus checkers.
3Insert the MultiPASS Suite CD-ROM into your CD-ROM drive.
• The setup program should start automatically. If it does not, double-click [My
Computer] in the Windows screen, double-click the CD-ROM icon, then double-click
[csplash] or [csplash.exe].
4When the next screen appears, click
INSTALL MULTIPASS SUITE.
5Follow the on-screen instructions.
6When prompted, remove the label A,then connect a USB cable B(not
included) to the machine and computer.
Windows 98/Me/2000 Windows XP
NOTE
•If you cannot continue
with the installation after
connecting the USB cable,
refer to p. 9-1 of the Basic
Guide.
B
A
• Windows 98/Me/2000 users: Once connected, the USB driver will automatically be
installed.
• Windows XP users: Once connected, the “Found New Hardware Wizard” dialogue box
appears. Click [Install the software automatically], then click [Next].
NOTE
•Windows XP users: If during the installation process
the dialogue box on the right appears A,select the
language you prefer, then click [Next].
7Follow the on-screen instructions to complete installation.
8When installation is complete, restart your computer before using the MultiPASS
Suite software.
Once installed, the MultiPASS Toolbar will be displayed on the desktop:
For details on using the MultiPASS Toolbar, see p. 7-1 of the Basic Guide.
Congratulations! You have now completed your machine
setup.
Where to from here...
Once you have completed all steps in this Setup Sheet, refer to the Basic Guide for
instructions on all functions of your machine. For comprehensive instructions on
the MultiPASS Suite software, refer to the Software Guide (included in the CD-ROM).
Part no. HT3-2128-000-V.1.0
© 2003 Canon Inc.
Canon, MultiPASS, imageCLASS, and BCI are trademarks of Canon Inc.
All other products and brand names are registered
trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
PRINTED IN THAILAND
A
Other manuals for imageCLASS MPC190
1
This manual suits for next models
1
Table of contents
Other Canon All In One Printer manuals
Canon
Canon ImageCLASS MF3240 Series Safety guide
Canon
Canon IR5000 - iR B/W Laser Installation and operation manual
Canon
Canon PIXMA MG5220 Series User manual
Canon
Canon PIXMA MX452 User manual
Canon
Canon imageRUNNER ADVANCE C5500 Series Technical manual
Canon
Canon ImageRunner C2550 User manual
Canon
Canon ImageCLASS 2300 User manual
Canon
Canon PIXMA TS5055 Setup guide
Canon
Canon 3743B002 User guide
Canon
Canon IMAGERUNNER 2020 User manual
Canon
Canon imageRUNNER 5000i User manual
Canon
Canon PIXMA MP600 Instruction Manual
Canon
Canon Laser Class 310 User manual
Canon
Canon MF7280 - ImageCLASS B/W Laser Installation and operation manual
Canon
Canon PIXMA MX300 User manual
Canon
Canon imageRUNNER 1643iF II User manual
Canon
Canon PIXMA MG5320 Series User manual
Canon
Canon Color imageRUNNER LBP5360 User manual
Canon
Canon MG5700 Series Setup guide
Canon
Canon PIXMA MX392 User manual
