Candy RTL 871SZ-19 User manual

CONTENTS

Product overview

Safety precautions

Installation & adjustment

Before washing

Operation

Cleaning or Maintenance

Packing list

Specification

Trouble-shooting 15

Description of symbols

Safety warning

Balance washing machine

Install the bottom plate

Usage of the drain hose

Inlet pipe connection

Check the following before washing

Usage of the detergent

Loading your laundry

Explanation of buttons

Button Operation and Descriptions

Product overview

Please understand the shapes of the washing machine and accessories may be

different from the sketch figures in this manual due to product improvement.

Control panel seat

Control panel film

Adjustable foot(2 pieces)

Lint filter

Balance ring

Cabinet

Top lid component

Inner tub

Pulsator

Cabinet handle

Liquid detergent dispenser

Powder detergent dispenser

Softener dispenser

Cold water inlet valve

Power cord

Back cover

Fixed foot (2 pieces)

Base frame

Hook

Hot water inlet valve

Drain hose joint

Drain pump filter

Safety precautions

Description of symbols

Warning sign

Forbidden sign

Safety warning

Contents marked with this symbol are related to the safe use of

the product and the personal safety of the user.

Please operate in accordance to the contents of this manual,to

avoid harm to the user or damage to the machine itself.

Contents marked with this symbol indicate operations or actions

that should not be undertaken by the user.

Performing of such actions may result an injury to the user or

damage to machine itself,and void warranty.

Please check power socket condition to ensure it has been earthed correctly prior to

installation to ensure your safety

A separate, earthed power socket is

required for the power supply.

Hold the plug-not the electric cable-when

unplugging the washing machine.

Do not insert or remove the power plug with

wet hands.

The power plug should be accessible after

the machine installation.

Ensure the plug is removed and the taps

turned off in the following cases.Power

failure, cleaning, moving,installation

and when not in use.

The new hose-sets supplied with the

appliance are to be used and that old

hose-sets should not be reused.

The rated washing capacity,spinning

capaciy,The max. and min.inlet

water pressure refer to

specification page.

This appliance is intended to be used in

household and similar applications such as:

— staff kitchen areas in shops,office and

other working environments;

— farm houses;

— by clients in hotels,motels and other

residential type environments;

— bed and breakfast type environments;

— areas for communal use in blocks of flats

or in launderettes.

If the supply cord is damaged, it

must be replaced by the manufacturer,

its service agent or similarly qualified

persons in order to avoid a hazard.

CAUTION:If this appliance is supplied

from a cord extension set or electrical

portable outlet device ,the cord extension

set or electrical portable outlet device

must be positioned so that it is not

subject to splashing or ingress of

moisture.

Warning

Safety precautions

If you are using an extension cord or a portable electrical outlet

device (not recommended), ensure that it is positioned so that

it does not come into contact with water or moisture.

Do not install this appliance in a

damp or wet environment. Do not

leave wet laundry on the control

panel or spray water directly onto

this appliance, as this may cause the

washer to malfunction or cause an

electrical fault.

Do not wash

water-proof clothing

as this may affect

load balance during

spin cycle(s).

Do not connect to hot

water higher above

50°C.

Forbidden

This appliance is not intended for use by

persons (including children) with reduced

physical,sensory or mental

capabilities, or lack of experience

and knowledge, unless they have

been given supervision or

instruction by a person responsible

for their safety.Children should be supervised to

ensure that they do not play with the appliance.

Do not take apart,

repair or alter the

machine by

yourself.

Do not attempt to move washing or place

hands inside washing machine while in

operation.Please ensure children are

supervised around machine to avoid

harm.

Do not leave hot or heavy stuff on lid

or control panel as this may cause

damage to the washer or make the

washer unsafe to operate.

Do not wash laundry

with chemicals or other

volatile materials(such as

petrol,solvents or thinners)

as this cause damage

to the machine.

Keep washer away

from heat sources

such as heater,

stoves or direct sunlight.

The maximum inlet

water pressure refer to

specification page.

Back

Front

Bottom plate

Soft object

Do not block the ventilation holes with carpet.

Ensure carpet does not obstruct the opening under

the base of the cabinet.

The ventilation

holes at the bottom

Safety precautions

If power cord or other parts of this machine become damaged or faulty, please

contact a technician to have it repaired. Do not attempt repairs by yourself as this may

cause personal harm or void warranty.

Smart hinge

Smart hinge prevents sudden closing of the door.Door is heavy,be careful while

closing of the door.

Do not let your hands or any other material be caught

below door. It might cause injury or damage.

Door closing time is dependent on ambient temperature.

The higher the ambient temperature,the shorter

the door closing time and vice versa. Smart Closing

Door performs best when lid is closed from full open condition.

The washing machine whose lid can be opened during water extraction, that it takes

15s or more to stop of water-extracting chamber tub. The new hose-sets

supplied with the appliance are to be used and that old hose-sets should

not be reused.

The washing machine whose lid can be opened during water extraction, that it takes 15s

or more for complete stop of water-extracting chamber tub.

The new hose-sets supplied with the appliance are to be used and that old hose-sets

should not be reused.

Safety warning

Please remove item such as coins,

button, sand and other solid materials

from clothing before washing.

Check that water faucets are open

after connection to machine, prior

to operation and that pipes are

connected correctly.

Please use low suds/High Efficiency

washing powder.

Please install and adjust the machine according to the directions contained in this

manual.It is very important to follow these directions for the safe operation of the

machine and to ensure your machine operates correctly.

Installation & Adjustment

Back

Front

Screw

Bottom plate Carpet

Do not install this machine on an incline greater than 2° . Installing machine on an

angle or on rough ground will result in unstable running or stoppage of the

machine. Please adjust it by the following method:

1.Confirm it is level

2.Lift up the side of the leg slightly and twist the adjustable leg.

Note: The distance between the washing machine

and wall:at least 20 mm.

20mm

High Low

Balance washing machine

Install the bottom plate

The purpose of the bottom plate is to su ppress noise

from the washing machine during operation.

Steps:

1. Lay the washer on its back, on a nonabrasive surface.

2. Place the plate onto the bottom of the machine.

3. Use a screwdriver to tighten the screw ( in accessory

bag) securing the panel to bottom of the washer.

4. Once the screw is tight and the panel is secure, return

the washer to its standing position.

Installation & Adjustment

Usage of the drain hose

The drainage shall be smooth with the drain hose.

1.First connect the drain hose to the connection

point on the lower right side of the cabinet, and fasten

with drain hose clamp (provided).

2.Connect drain hose guide on to the outside of

drain hose. To guide the drain hose over the

tub or standpipe, the bracket MUST be fitted

to the drain hose.

Drain hose

clamp

Drain hose joint

1.The height of the standpipe or tub should be

between 0.8 - 1.2 m.

2.To avoid syphoning, the drain hose should not

extend more than 20 mm from the end of the guide.

Ensure drain hose is held in place to avoid

leaks or spills.

Bracket

8mh

Installation & Adjustment

Inlet pipe connection

The new hose-sets supplied with the appliance are to be

used and that old hose-sets should not be reused.

1.Connect the water inlet hose to the water tap. You may have

to use pliers to tighten the coupling. Do not over tighten as this may

cause damage to the valve or hose fittings.

2. Connect the other ends to their respective cold and hot water inlet valves

located on the top of the washer.

3. Fasten each hose on the washing machine and ensure a tight connection.

Check the inlet hose connections

1.Swing the hose gently to confirm that the hose is

securely fastened.

2.After installation, open the tap to check for leaks.

Remove the water inlet hoses

1.Turn off the water taps.

2.Loosen each connection at water taps and washer.

3.Do not bend the hose unduly.

4.Periodically check the hose connections are firm

at both ends. This is to ensure the connections

remain watertight over time.

3.Carefully remove each hose separately, as they may contain residual water.

This manual suits for next models

Table of contents

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide