Candy CITT642C/E1 User manual
PN:16166000A24991
Candy-MC-IF7251J1-A（IF7251J1-A）
CITT642C/E1
80G双胶纸
20210301
1、印刷颜色：钉装，单黑；
Thank you for purchasing the CANDY induction hob. Please read this instruction manual
carefully before using the hob and keep it in a safe place for future reference.
CITT642C/E1
Instructions Manual For Induction Hob
ENGLISH
Manuale di istruzioni per il piano cottura a induzione
ITALIANO
EN-2
EN-3
EN-4
59cm 52cm
6.2cm 5.8cm
EN-5
1. Max. 1300/1500W zone
2. Max. 2300/2600W zone
3. Max. 1800/2000W zone
4. Max. 1800/2000W zone
5. Glass plate
6. Control panel
1. On/Off control
2. Timer control
3. Boost
4. Heating zone selection controls
5. Power / Timer regulating key
6. Keylock control
four
2
1
3
4
5
3
2 1
4 5 6
EN-6
EN-7
How to use
Start cooking
Touch the ON/OFF control for three seconds. After power
on, the buzzer beeps once, all displays show “–” or “– –”,
indicating that the induction hob has entered the state of
standby mode.
Place a suitable pan on the cooking zone that you wish to
use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Touching the heating zone selection control ,and an
indicator next to the key will flash
Select a heat setting by touching the “-”or “+” control.
•If you don’t choose a heat setting within 1 minute, the
Induction hob will automatically switch off. You will need to
start again at step 1.
•You can modify the heat setting at any time during
cooking.
If the display flashes alternately with the heat setting
This means that:
•you have not placed a pan on the correct cooking zone or,
•the pan you’re using is not suitable for induction cooking or,
•the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 1 minute if no suitable pan is placed on it.
EN-8
Finish cooking
Using the Boost function
Touching the heating zone selection control that you
wish to switch off
Turn the cooking zone off by scrolling down to “0” or
touching “-” and “+” control together. Make sure the
display shows “0”.
Turn the whole cooktop off by touching the ON/OFF
control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down to
a safe temperature. It can also be used as an energy
saving function if you want to heat further pans, use
the hotplate that is still hot.
OR
Activate the boost function
Touching the heating zone selection control.
Touching the boost control , the zone indicator show
“P” and the power reach Max.
EN-9
Table of contents
Other Candy Hob manuals
Candy
Candy CMCSG74WW User manual
Candy
Candy PG750 User manual
Candy
Candy CFIF36 User manual
Candy
Candy CDK6GF4WEKB User manual
Candy
Candy CDIH6GBFE4WX User manual
Candy
Candy CFI36 User manual
Candy
Candy PL2D40NX User manual
Candy
Candy CPG 75 SQPX User manual
Candy
Candy CFID36 User manual
Candy
Candy CH642B User manual
Candy
Candy CID 30/G3 User manual
Candy
Candy CMCJ644TPWIFI User manual
Candy
Candy PVS 604 HL Operation manual
Candy
Candy CH74BVT User manual
Candy
Candy CTPS64MCTTWIFI User manual
Candy
Candy CSG6B/4U2 User manual
Candy
Candy CVG64STGN JV User manual
Candy
Candy CSG6B User manual
Candy
Candy CIS633SCTT User manual
Candy
Candy CTP644MCBB/1 User manual
