Brother PocketJet 6 User manual

QUICK SETUP GUIDE

PJ-622/PJ-623/

PJ-662/PJ-663

Mobile Printer

For more information on using this printer,

be sure to read the Pocket Jet User’s

Guide, which is included on the CD-ROM.

Warranty information, product registration

and other documents can be viewed and

printed from the CD-ROM.

We suggest that you keep this manual in a

handy place for future reference.

US ENG

English

General Description

1 (Power) button

2(Feed)button

3 POWER indicator

4 DATA indicator

5 STATUS indicator

6 (Bluetooth) indicator (PJ-662/663 only)

7 Release cover

8 Paper outlet slot

9Tearbar

10 Paper input slot

11 IrDA port

12 USB port

13 AC/DC connector

14 Battery cover latch

15 Battery cover

16 Battery removal ribbon

17 Battery compartment

Connecting to an AC

Power Outlet (Optional)

Connect the printer to a nearby AC power

outlet to power the printer or charge the

rechargeable battery using AC power.

aConnect the AC adapter to the printer.

bConnect the AC power cord to the AC

adapter.

cConnect the AC power cord to a nearby

AC power outlet (100 - 240 VAC,

50 - 60 Hz).

1 AC adapter

2 AC power cord

Note

The AC adapter and AC power cord are

optional accessories. When purchasing,

purchase the adapter and power cord

appropriate for the region where the

printer will be used.

3456

11 14

12 13

Installing the

Rechargeable Ni-MH

Battery

aOpen the battery cover by pressing the

cover latch.

1 Battery cover

2 Cover latch

bSwing the cover open and remove it.

cGently insert the battery connector into

the terminal on the inside of the battery

compartment.

3Terminal

4 Battery connector

dGrasp the battery removal ribbon, which

is attached to the inside of the battery

compartment. Make sure that enough

ribbon is exposed after the rechargeable

Ni-MH battery installed so that you can

pull the ribbon to remove the battery.

eWhile holding onto the ribbon, tilt the

rechargeable Ni-MH battery and insert it

into the battery compartment. After the

rechargeable Ni-MH battery passes the

outer edges of the compartment, press it

securely into position.

Note

• Make sure that the side of the

rechargeable Ni-MH battery marked

“Ni-MH” faces away from the battery

compartment, otherwise the battery cover

will not close properly.

• The rechargeable Ni-MH battery contains

a heat sensor that stops the flow of

electricity if the battery overheats.

fAttach the battery cover to the end of the

battery compartment opposite the

AC/DC connector. Close and latch the

cover. If necessary, gently push the

cover latch towards the AC/DC

connector until it latches.

Note

• Be careful that you do not pinch the

battery connector cord.

• The voltage supplied by the rechargeable

Ni-MH battery fluctuates. The printing

speed may also fluctuate depending on

the voltage.

English

Install the Printer

Driver

Note

• Please do not connect the printer to your

computer via the USB cable until you have

installed the printer driver. If you

accidentally do so, cancel the “New

Hardware Wizard”, disconnect the printer,

and install the driver as described below.

• To use the Bluetooth interface

(PJ-662/663 only), install a Bluetooth

driver on the computer before installing

the printer driver and PJ-600 Series Utility.

Instructions for Bluetooth setup can be

found in the User’s Guide on the

CD-ROM.

For Windows®Users

aInsert the CD-ROM into your computer’s

CD-ROM drive.

bClick [PC (Windows) software], and

then click [Standard Installation] or the

specific item you want to install.

If you click [Standard Installation], the

following items are installed depending

on the model.

For PJ-622/662:

Printer driver and PJ-600 Series Utility

For PJ-623/663:

Printer driver, PJ-600 Series Utility and

P-touch®Editor

cSelect the model.

dFollow the on-screen instructions to

install the software.

eClick [Finish] to close the installation

screen.

For Mac OS®Users

aInsert the CD-ROM into your computer’s

CD-ROM drive.

bOpen the [Mac OS X] folder and then

double-click [Brother PJ-XXX

Driver.pkg] to start the driver installer.

cFollow the on-screen instructions to

install the software.

dFor PJ-622/623:

After the installation is completed, click

[Close].

For PJ-662/663:

When the installation is completed, click

[Restart]. The computer restarts.

eTurn on the printer.

fMac OS®X 10.4.11:

Double-click the drive where Mac OS®X

is installed, and double-click

[Applications] - [Utilities] - [Printer

Setup Utility]. The [Printer List]

window displayed.

Mac OS®X 10.5.x - 10.6:

Click in order of Apple menu - [System

Preferences...], and click [Print & Fax].

gClick the [Add] / [+] button to add your

machine.

hChoose [PJ-XXX] / [Brother PJ-XXX]

and then click [Add]. The printer is now

ready to print.

Connecting the

Computer and Printer

The printer can be connected to your

computer via USB cable and Bluetooth

(PJ-662/663 only). Instructions for Bluetooth

setup can be found in the User’s Guide on the

CD-ROM.

Note

When connecting via Bluetooth, the

connection settings are saved even after

the printer is turned off.

USB Connection

aMake sure that the printer is turned off

before connecting the USB cable.

bConnect the printer end of the USB

cable to the USB port on the side of the

printer.

1USBcable

2 USB port

cConnect the other end of the USB cable

to the USB port on the computer.

Printing

For typical printing, use the following

procedure.

aOpen the document to be printed.

bMake sure that the printer is properly

powered. Use a charged battery, or

connect the printer to an AC or DC

power outlet.

cTurn the printer on by pressing the

(Power) button. The POWER

indicator lights.

1 (Power) button

2 POWER indicator

dConnect the printer to a computer, using

either USB, IrDA (Windows®only), or

Bluetooth (PJ-662/663 only).

eLoad the paper. Use both hands to hold

the paper straight, and then gently insert

the paper into the printer’s input slot until

the roller pulls it into the starting

position. Use genuine Brother paper.

Note

• Make sure that the bottom edge of the

paper is parallel to the roller.

• Only one side of the paper can be printed

on. Check the paper, and load it so that

the smooth, coated side faces down.

Install the printer driver before

connecting the printer to the computer.

English

1 Print surface

fIf necessary, change the print settings

using either the printer driver or PJ-600

Series Utility.

gClick [Print] in the computer program’s

menu.

The DATA indicator blinks in green to

indicate that the printer is receiving data,

and the document is printed.

hTurn the printer off by pressing the

(Power) button quickly two times. The

POWER indicator turns off.

Note

• If paper is loaded and the DATA indicator

remains green without blinking, the printer

has not received enough data to print an

entire page. Press and hold the

(Feed) button to print and eject the

page.

• If you load paper before you start the print

job, you will have time to adjust the paper.

If the paper is skewed after the printer

pulls it into the starting position, open the

release cover completely, remove the

paper, and then close the cover and load

the paper again.

Accessing the User’s

Guide and P-touch®

Editor Software User’s

Guide

The User’s Guide and P-touch®Editor

Software User’s Guide (PJ-623/663 only) can

be found on the setup CD-ROM.

You can access these documents by

selecting the desired document on the top

menu screen which appears automatically

after you insert the CD-ROM into your

computer.

LB3827001

Printed in the USA

Other manuals for PocketJet 6

This manual suits for next models

Table of contents

Other Brother Printer manuals

Brother

Brother HL-1020 User manual

Brother

Brother MFC-T920DW User manual

Brother

Brother DCP-1608 User manual

Brother

Brother Rugged Jet RJ-3150Ai User manual

Brother

Brother HL 1850 - B/W Laser Printer User manual

Brother

Brother DCP-J572DW Technical manual

Brother

Brother MPrint MW-140BT Quick start guide

Brother

Brother GTXpro BULK DTF R2R User manual

Brother

Brother HL-L9300CDW User manual

Brother

Brother HL-8050N User manual

Brother

Brother HL-3160CDW User manual

Brother

Brother MFC-T800W Operating and maintenance manual

Brother

Brother DCP-J4120DW Operating manual

Brother

Brother HL-2600CN Series User manual

Brother

Brother HL-2460 Series User manual

Brother

Brother HL HL-1060 User manual

Brother

Brother DCP-J100 User manual

Brother

Brother DCP-J562DW Technical manual

Brother

Brother HL- SERIES Use and care manual

Brother

Brother P-Touch QL-500 User manual

Brother

Brother GT-541 User manual

Brother

Brother HL-DCP-9055CDN User manual

Brother

Brother MFC-B7715DW Technical manual

Brother

Brother HL-5270DN User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide