Brother DCP-J100 Operating manual

How to use this guide: 1

1 Read the whole guide before using your machine and keep it for later reference. Keep the User's

Guide in a secure place for future reference.

2 Carefully follow the instructions set out in this guide and always ensure that you follow all

warnings and instructions marked on the product.

3 If you have concerns about how to use your machine after reading this guide, please contact

Brother customer service or your local Brother dealer.

4 To ensure you understand all of the instructions, study the Symbols and Conventions used in the

documentation.

Product Safety Guide 1

DCP-J100/J105/MFC-J200

Brother Industries, Ltd.

15-1, Naeshiro-cho, Mizuho-ku, Nagoya 467-8561, Japan

Please read this booklet before attempting to operate the machine, or before attempting any

maintenance. Failure to follow these instructions may result in an increased risk of fire, electrical

shock, burns or suffocation. Brother shall not be liable for damage caused where the product

owner has failed to follow instructions set out in this guide.

Version 0

CHN-ENG

Symbols and conventions used in the

documentation 1

The following symbols and conventions are used throughout the documentation.

Follow all warnings and instructions marked on the machine.

NOTE

The illustrations in this guide show the

MFC-J200.

WARNING

WARNING indicates a potentially

hazardous situation which, if not avoided,

could result in death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

NOTE

Notes tell you how to respond to a situation

that may arise or give tips about how the

operation works with other features.

Prohibition icons indicate actions

that must not be performed.

This icon indicates that flammable

sprays must not be used.

This icon indicates that organic

solvents such as alcohol and liquids

must not be used.

Electrical Hazard icons alert you to

possible electrical shocks.

Fire Hazard icons alert you to the

possibility of a fire.

Bold Bold typeface identifies specific

buttons on the machine’s

control panel, or on the

computer screen.

Italics Italicized typeface emphasizes

an important point or refers you

to a related topic.

Courier

New

Text in the Courier New font

identifies messages on the

LCD of the machine.

Compilation and Publication Notice 1

This manual has been compiled and published to provide the latest product safety information at

the time of publication. The information contained in this manual may be subject to change.

For the latest manual, please visit us at http://solutions.brother.com/.

Use only GENUINE brother supplies

Brother multifunction machines are designed to work ink of a particular specification and work to

a level of optimum performance when used with genuine Brother ink cartridges. Brother cannot

guarantee this optimum performance if ink or ink cartridges of other specifications are used.

Brother does not therefore recommend the use of cartridges other than genuine Brother cartridges

with this machine or the refilling of empty cartridges with ink from other sources. If damage is

caused to the print head or other parts of this machine as a result of the use of ink or ink cartridges

other than genuine Brother products due to the incompatibility or lack of suitability of those

products with this machine, any repairs required as a result will not be covered by the warranty.

Choose a safe location for your machine 1

Put your machine on a flat, stable surface that is free from shocks and vibrations, such as a desk.

Put the machine near a telephone socket and a standard grounded electrical socket. Choose a

dry, well ventilated location where the temperature remains between 10 C and 35 C.

WARNING

DO NOT expose the machine to direct sunlight, excessive heat, open flames, corrosive gasses, moisture

or dust. DO NOT place your machine on a carpet or rug as this will expose it to dust. Doing so may create

a risk of an electrical short or fire. It may also damage the machine and/or render it inoperable.

DO NOT place the machine near heaters, air conditioners, water, chemicals or devices that

contain magnets or generate magnetic fields. Doing so may create the risk of a short circuit or

fire should water come into contact with the machine (including condensation caused by heating

systems or air conditioning and ventilation equipment).

DO NOT place the product near chemicals or in a place where chemical spillage could occur. In

particular, organic solvents or liquids may cause the casing and/or cables to melt or dissolve, risking

fire or electric shock. They may also cause the product to malfunction or become discoloured.

Slots and openings in the casing, back or bottom of the product are provided for ventilation. The product

should be placed so as not to come into contact with any wall or other device so these openings are

not blocked or covered. Blocking the machine’s ventilation could create a risk of overheating and/or fire.

IMPORTANT

• Always place the machine on a solid surface, never on a bed, sofa, rug, or similar soft surfaces.

• Do not place this machine in a “built-in” installation.

IMPORTANT

• DO NOT put objects on top of the machine.

• DO NOT place anything in front of the machine that will block printouts. DO NOT place

anything in the path of received faxes.

• DO NOT place your machine next to sources of interference, such as speakers or the base

units of non-Brother cordless telephones. Doing so may interfere with the operation of the

machine’s electronic components.

• DO NOT place the machine on any tilted/slanted surface. DO NOT tip the machine after the ink

cartridges are installed. Doing so may cause ink spillage and internal damage to the machine.

General precautions 1

WARNING

Plastic bags are used in the packing of your machine. To avoid danger of suffocation, keep

these plastic bags away from babies and children. Plastic bags are not toys.

For users with pacemakers

This machine generates a weak magnetic field. If you experience any unusual symptoms with your

pacemaker while near the machine, move away from the machine and consult a doctor immediately.

Avoid using this machine during an electrical storm. There may be a remote risk of electric shock

from lightning.

DO NOT use flammable substances, any type of spray, or an organic solvent/liquid that contains alcohol

or ammonia to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock.

CAUTION

Do not try and pick up pages until they have finished printing and are ejected from the machine.

Doing this may cause you injury by trapping your fingers in the rollers.

Some areas of the machine can cause injury if covers (shaded) are closed with force. Take care

when placing your hand in the areas shown in the illustrations.

DO NOT carry the machine by holding the scanner cover, the Jam Clear Cover or control panel.

Doing so may cause the machine to slip out of your hands. Only carry the machine by placing

your hands under the entire machine.

Do not remove the serial number and instruction labels that are affixed to the machine.

IMPORTANT

Disruption of power can wipe out information in the machine’s memory.

Connecting the machine safely 1

WARNING

There are high-voltage electrodes inside the machine. Before you access the inside of the

machine, including for routine maintenance such as cleaning, make sure you have unplugged

the power cord from the electrical socket as well as any telephone (RJ-11) (MFC models only)

cables from the machine.

DO NOT handle the plug with wet hands. Doing so may cause an electrical shock.

Always make sure the plug is fully inserted.

This machine should be connected to an adjacent grounded AC power source within the range

indicated on the rating label. DO NOT connect it to a DC power source or inverter. Doing so may

cause an electrical shock. If you are not sure what kind of power source you have, contact a

qualified electrician.

This machine is equipped with a 3-wire grounded plug. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call your

electrician to replace your obsolete outlet. DO NOT use the supplied grounded plug in any other

outlet except those specified. Doing so may cause an electrical shock.

(MFC models only)

Never touch telephone wires or terminals that are not insulated unless the telephone line has

been unplugged at the wall socket. Never install telephone wiring during a lightning storm. Never

install a telephone wall socket in a wet location. Doing so may cause an electrical shock.

DO NOT use the machine if the power cord is frayed or damaged. Doing so may cause an

electrical shock or fire.

DO NOT pull on the middle of the AC power cord. DO NOT allow anything to rest on the power

cord. DO NOT place this machine where people may step on the cord. Doing so may cause an

electrical shock or fire.

Brother strongly recommends that you DO NOT use any type of extension cord.

Servicing the machine 1

DO NOT attempt to service this machine yourself. Opening or removing covers may expose you

to dangerous voltages and other risks, and may void your warranty. If you experience any

problems with your machine, contact Brother customer service or your local Brother dealer.

WARNING

If the product has been dropped or the casing has been damaged, there may be the possibility

of an electric shock. Unplug the machine from the power socket and call Brother customer

service or your local Brother dealer.

CAUTION

If the machine becomes unusually hot, releases smoke, generates any strong smells, or if you

accidentally spill any liquid on it, immediately unplug the machine from the electrical socket. Call

Brother customer service or your local Brother dealer.

IMPORTANT

If the machine does not operate normally when the operating instructions are followed, adjust

only those controls that are covered by the operating instructions. Incorrect adjustment of other

controls may result in damage and will often require extensive work by a qualified technician

to restore the machine to normal operation.

Other manuals for DCP-J100

This manual suits for next models

Table of contents

Other Brother All In One Printer manuals

Brother

Brother DCP 8060 User manual

Brother

Brother DCP-110C User manual

Brother

Brother Airprint MFC-J460DW User manual

Brother

Brother DCP-7055 User manual

Brother

Brother MFC 5890CN - Color Inkjet - All-in-One Quick start guide

Brother

Brother DCP-L5500DN User manual

Brother

Brother MFC-253CW User manual

Brother

Brother DCP 330C - Color Inkjet - All-in-One User manual

Brother

Brother MFC 7345N - Laser Multifunction Center User guide

Brother

Brother DCP-197C User manual

Brother

Brother MFC-9440CN User manual

Brother

Brother DCP-J772DW User manual

Brother

Brother MFC 250C - Color Inkjet - All-in-One Parts list manual

Brother

Brother DCP-J140W User manual

Brother

Brother HL-4150CDN Installation instructions

Brother

Brother FAX-2840 Assembly instructions

Brother

Brother MFC 3240C - Color Inkjet - All-in-One User manual

Brother

Brother MFC-J220 User manual

Brother

Brother DCP-J152W User manual

Brother

Brother MFC-7240 User manual

Brother

Brother DCP-9040CN User manual

Brother

Brother DCP-375CW User manual

Brother

Brother MFC-8440 User manual

Brother

Brother MFC 845CW - Color Inkjet - All-in-One Specification sheet

Popular All In One Printer manuals by other brands

Triumph Adler

Triumph Adler DC 2016 Instruction handbook

Epson

Epson WorkForce WF-2510 Basic guide

Epson

Epson Stylus Scan 2000 Product information guide

Epson

Epson PictureMate Snap PM 240 Start here

Konica Minolta

Konica Minolta bizhub C35 user guide

Konica Minolta

Konica Minolta BIZHUB 558 Quick reference guide

Lexmark

Lexmark MX710 Series setup sheet

Lexmark

Lexmark XC8155 user guide

Lexmark

Lexmark X642E Service manual

Sharp

Sharp MX-2310U Start guide

Aficio

Aficio 200 manual

Canon

Canon ImageCLASS 2300 setup sheet

Ricoh

Ricoh Pro C900 Brochure & specs

Lexmark

Lexmark X925 Installation

Epson

Epson Stylus CX8400 Series Brochure & specs

Oce

Oce VarioLink 5022 user guide

Copystar

Copystar CS 4551ci Specifications

Konica Minolta

Konica Minolta Magicolor 4650EN Service manual