Breezy BB01-WC User manual

D001128 Rev A.1 www.BuildWithRobots.com Page 1

User Manual

Breezy Smart Controller (SKU: BB01-WC)

D001128 Rev A.1 www.BuildWithRobots.com Page 2

Manufacturer and Contact

Information

Manufacturer: Build With Robots

Address: 429 Commercial Street NE

Albuquerque, NM 87102

For product information, sales, service, and technical support:

https://buildwithrobots.com/

Customer Support Phone: (833) 273-3991

Email: info@buildwithrobots.com

This manual covers the model: Breezy Smart Controller (BB01-WC)

SPECIFICATIONS:

Dimensions: 134.5 × 65 × 17.5 mm (5.3 x 2.56 x 0.69 inches)

Weight: 224.5 g (0.495 pounds)

USB: Type C

Wi-Fi: WLAN 802.11 a/b/g/n/ac 2.4GHz/5GHz

Bluetooth: Bluetooth 4.2

Splash, Water & Dust Resistant: IP68 Water / Dust Resistant

D001128 Rev A.1 www.BuildWithRobots.com Page 3

Environmental Considerations

This section provides information about the environmental impact of

the product.

Product End-of-Life Handling

Observe the following guidelines when recycling an instrument or

component:

Equipment recycling. Production of this device required the

extraction and use of natural resources. The device may contain

substances that could be harmful to the environment or human

health if improperly handled at the product’s end of life. To avoid

the release of such substances into the environment and to reduce

the use of natural resources, we encourage you to recycle this

product in an appropriate system that will ensure that most of the

materials are reused or recycled appropriately. It is recommended

that this device be taken to a certified Waste Electronic and

Electrical Equipment recycler.

Do not throw in trash at end of product life.

D001128 Rev A.1 www.BuildWithRobots.com Page 4

Contents

Manufacturer and Contact Information............................................................................................ 2

Environmental Considerations ............................................................................................................. 3

BB01-WC Breezy Smart Controller Setup ........................................................................................... 5

Controller navigation overview ...................................................................................................5

Connecting to Wi-Fi.........................................................................................................................6

Setting lock screen PIN (optional) ..............................................................................................8

Updating Android Kiosk PIN for Wi-Fi and settings (optional) .............................................9

Log-in.................................................................................................................................................10

Settings Page Overview ...............................................................................................................12

Pairing ...............................................................................................................................................13

Forget Device..................................................................................................................................14

Configuration ..................................................................................................................................17

Alias Button (Rename)..................................................................................................................17

Fogging Duration Button ..............................................................................................................18

Schedule Button .............................................................................................................................20

Update Dialog.................................................................................................................................23

View Log...........................................................................................................................................24

Lock and Unlock Devices............................................................................................................24

Remote Controlled Operation........................................................................................................28

Troubleshooting...................................................................................................................................... 30

LIMITED WARRANTY (USA/CANADA)................................................................................................. 31

D001128 Rev A.1 www.BuildWithRobots.com Page 5

BB01-WC Breezy Smart Controller

Setup

It is recommended that you charge the controller fully before use.

Controller navigation overview

Basic controls are the same as an Android phone.

1. The Home button is located at the center-bottom of the screen

(left picture above).

2. The recent button is located at the bottom right of the screen

(right picture above). This button can be used to close or

quickly refresh the Breezy Blue app if problems are

encountered.

3. Power button. This is used to shut down and restart the

controller.

D001128 Rev A.1 www.BuildWithRobots.com Page 6

Connecting to Wi-Fi

Connecting to Wi-Fi is required for receiving app and firmware

updates. App updates will occur automatically if connected to Wi-

Fi.

1. Power controller on

2. Select settings from the icon on the main screen

a. If you don’t see the icon, press the home button on

the controller

3. Enter 0000, then press OK

4. Select Gear in top right corner

5. Select Network & Internet

6. Select Wi-Fi

7. Select the Wi-Fi network you would like to connect to, enter the

password, and press CONNECT.

D001128 Rev A.1 www.BuildWithRobots.com Page 7

Setting screen timeout (optional)

1. Select settings from the icon on the main screen

2. Enter 0000, then press OK

3. Select Hardware

4. Select Display Timeout (seconds)

5. Select the preferred display timeout from list of options.

D001128 Rev A.1 www.BuildWithRobots.com Page 8

Setting lock screen PIN (optional)

1. Select settings from the icon on the main screen.

2. Enter 0000, then press OK.

3. Select the settings gear.

4. Select Security

5. Select Screen lock

6. Select PIN (or other options) and follow in screen instructions

If you choose to change the default PIN to a customized PIN, BWR

will NOT be able to recover your controller in the event you lose or

forget your customized PIN.

D001128 Rev A.1 www.BuildWithRobots.com Page 9

Updating Android Kiosk PIN for Wi-Fi and settings (optional)

1. Select settings from the icon on the main screen.

2. Enter 0000, then press OK.

3. Select Admin

4. Select Settings Password and follow on-screen instructions to

set a new PIN, then press OK. This PIN is used to configure any

system settings on the controller.

5. Select Wi-Fi Settings Password and follow on-screen

instructions to set a new PIN, then press OK. This PIN is only

used for updating Wi-Fi settings on the controller.

If you choose to change the default PIN to a customized PIN, BWR

will NOT be able to recover your controller in the event you lose or

forget your customized PIN.

D001128 Rev A.1 www.BuildWithRobots.com Page 10

Log-in

Press the physical home button on the controller.

1. Select the Breezy Blue logo on the upper left-hand side of the

screen to open the app –if it doesn’t open automatically.

2. Select CONTINUE AS GUEST or CREATE ACCOUNT to proceed as

a first-time user. BWR strongly recommends creating an account

for the first-time users and staying signed in for device security

management. If CREATE ACCOUNT is selected, an email and a

numeric password will be required.

3. After successfully creating the account, return to the SIGN IN

page and sign in with the credentials used in step 2.

Note: Please save the user and password in a safe place for future

reference.

Table of contents

Other Breezy Controllers manuals

Breezy

Breezy PowerSupport User manual

Popular Controllers manuals by other brands

Digiplex

Digiplex DGP-848 Programming guide

YASKAWA

YASKAWA SGM series user manual

Sinope

Sinope Calypso RM3500ZB installation guide

Isimet

Isimet DLA Series Style 2 Installation, Operations, Start-up and Maintenance Instructions

LSIS

LSIS sv-ip5a user manual

Rockwell Automation

Rockwell Automation 1769-L31 installation instructions

Airflow

Airflow Uno hab Installation and operating instructions

ABB

ABB ACS580-01 drives Hardware manual

Panasonic

Panasonic GM1 Series Reference manual

Emerson

Emerson SW93 owner's manual

AutoAqua

AutoAqua Smart ATO micro SATO-120P manual

Panasonic

Panasonic FP? Positioning Unit RTEX Technical manual

Samson

Samson Type 5824 Mounting and operating instructions

Alpha IP

Alpha IP MIOB 21001 manual

Siemens

Siemens OpenAir GMA 1 Series Mounting instructions

Surecom

Surecom SR-629 user manual

Fishman

Fishman TriplePlay installation guide

Regulus

Regulus SRS1 T Installation and operation manual