Bradley SA70 Series User manual

Installation

P.O. Box 309

Menomonee Falls, WI 53052 USA

800 BRADLEY (800 272 3539)

+1 262 251 6000

bradleycorp.com

WARNING

Unit is supplied with 1/4" - 20 x 1-1/2" T27 torx head machine screws for installation to wall anchors (not

included). Wall anchors/backing used must provide adequate support for the intended load requirements.

Grab bars are no stronger than the anchors and walls to which they are attached, and therefore, must be

firmly secured in order to support the intended load requirements. To avoid potential injury, the building

owner or maintenance personnel should remove the grab bar from service if the mounting is not adequately

secured to the wall or if there are any observed product defects.

CAUTION

Personal Protective Equipment (PPE) is required during the installation of this product.

IMPORTANT

Read this entire installation manual to ensure proper installation. When finished with the installation, file

this manual with the owner or maintenance department. Compliance and conformity to local codes and

ordinances is the responsibility of the installer.

Separate parts from packaging and make sure all parts are accounted for before discarding any packaging

material. If any parts are missing, do not begin installation until you obtain the missing parts.

Product warranties may be found under "Products" on our website at www.bradleycorp.com.

Security Grab Bars -

Exposed Mounting

SA70 Series

500-378 Rev. A; ECN 18-15-009

Page 1 of 2 4/2/2018

-001 configuration shown. See Bradley's

website for other configurations.

SA70 Series Installation

2 4/2/2018 Bradley • 500-378 Rev. A; ECN 18-15-009

Installation

Verify all rough-in dimensions prior to installation.

WARNING Wall must be reinforced in the area of the grab bar in order to support the load it is

intended to support.

1. Using the bar as a template, mark the mounting hole location onto the wall.

2. Drill holes and set anchors as appropriate.

3. Mount grab bar and secure mounting screws.

For more information on Bradley's grab bar mounting kits, please visit www.bradleycorp.com

Mounting Flange Dimensions

3-1/4"

(80mm)

2-1/2"

(60mm)

* 1-1/2" wall clearance required

under most building design codes

* 1-1/2"

(38mm)

1/8"

(3mm)

3-1/8"

(79mm)

exposed

This manual suits for next models

Table of contents

Other Bradley Bathroom Fixture manuals

Bradley

Bradley E19-130 User manual

Bradley

Bradley Terreon Classic WF2500 Series User manual

Bradley

Bradley WS-1X-HN User manual

Bradley

Bradley S19-130BF User manual

Bradley

Bradley CBSHWR9000KD User manual

Bradley

Bradley WF2608 User manual

Bradley

Bradley Express MG Series User manual

Bradley

Bradley Express EXD Series User manual

Bradley

Bradley Express SS Series User manual

Bradley

Bradley CBSHWR9000 User manual

Bradley

Bradley 5600 Series User manual

Bradley

Bradley S19-310SPR User manual

Bradley

Bradley s19314 series User manual

Bradley

Bradley SXWS9557FM User manual

Bradley

Bradley S19-310TW8 User manual

Bradley

Bradley 500 Series User manual

Bradley

Bradley OmniDeck 3000 Series User manual

Bradley

Bradley Express SS Series User manual

Bradley

Bradley S19-310DC User manual

Bradley

Bradley Verge LVA Series User manual

Bradley

Bradley S19-304C2 User manual

Bradley

Bradley S19-120T User manual

Bradley

Bradley SXWS9148FM User manual

Bradley

Bradley S19-310SS User manual

Popular Bathroom Fixture manuals by other brands

DURAVIT

DURAVIT C.1 C15240 0090 Instructions for mounting and use

Heatstore

Heatstore HSTRL500WTN Installation and operating instructions

Sunshower

Sunshower PURE SOLO manual

Delabie

Delabie Delabie Sporting 714700 manual

Kohler

Kohler K-13056 Homeowner's guide

ESS

ESS Container TCL-11 installation manual

Mustee

Mustee 22C installation instructions

VITRA

VITRA V-Flow manual

baliv

baliv DUK-80.30 T manual

Malmet

Malmet B105BT Operation, maintenance and installation manual

bathstore

bathstore Transition H1690MM Installation, Care & Adjustment Instructions

BELLOSTA

BELLOSTA Edward 0800/M Installation instruction

baliv

baliv DU-5160 manual

Franke

Franke PRTR0006 Installation and operating instructions

Gessi

Gessi RILIEVO 59011 manual

noken

noken VITAE 100188525-N299998810 manual

Allen + Roth

Allen + Roth 1142VA-30-201 manual

Britex

Britex HBDA installation guide