Bowflex SelectTect BDS1642 User manual
2-In-1 Stand
Assembly Instructions
Model: BDS1642
2
Complete Stand Component Diagram
3
Tools Required
7/32" Allen Wrench (included)
You will also need:
9/16" Socket
9/16" Wrench or Adjustable Wrench
Utility knife or scissors to cut nylon ties
Parts
# Qty. Description
1 1 TUBE, BOTTOM CROSS BRACE
2 1 ASSEMBLY, REAR LEFT STABILIZER
3 1 ASSEMBLY, REAR RIGHT STABILIZER
4 2 ASSY, STAND LEG
5 1 WELDMENT, LEFT DUMBBELL PLATFORM
6 1 WELDMENT, RIGHT DUMBBELL PLATFORM
7 1 WELDMENT, TOWEL BAR
8 1 FOOT PEGS, SET OF FOUR
9 1 HOLD DOWN STRAPS, 2F 2M
10 20 NUT-NL 0.375-16 G2-BlkZ
11 36 WASHER-FLAT 0.375 REGULAR BLKZ
12 8 SCREW-BHCS 0.375-16x3.0 G2-BlkO
13 4 SCREW-BHCS 0.375-16x2.75 G2-BlkO
14 4 SCREW-BHCS 0.375-16x2.5 G2-BlkO
15 4 SCREW-FHCS 0.375-16x1.0 G2-BlkO
16 1 WHEELS, CASTER SET OF FOUR
17 1 PLATE, CENTER W/ LOGO
2.5"
2.75"
3.0"
Flat Head
Button Head
Lock Nut Flat Washer
Button Head
Button Head
Hardware
Qty
Hardware Card A:
2.75" Screw, Button Head 4
2.5" Screw, Button Head 4
1.0" Screw, Flat Head 4
Nut, Lock 12
Washer, Flat 20
Hardware Card B:
3.0" Screw, Button Head 8
Nut, Lock 8
Washer, Flat 16
7/32" Allen Wrench
4
step
1
Parts:
• Stand Leg (#4)
• Rear Left Stabilizer (#2)
Hardware Qty
• 3" Screws (#12) 2
• Washers (#11) 4
• Nuts (#10) 2
Tools:
• Hex Key (7/32”)
1-1 Attach the Rear Left Stabilizer (#2) to the Stand Leg (#4) using the hardware shown in Figure 1.
Note: Do not tighten hardware.
Figure 1
5
step
2
Figure 2
Parts:
• Stand Leg (#4)
• Rear Right Stabilizer (#3)
Hardware Qty
• 3" Screws (#12) 2
• Washers (#11) 4
• Nuts (#10) 2
Tools:
• Hex Key (7/32”)
2-1 Attach the Rear Right Stabilizer (#3) to the Stand Leg (#4) using the hardware shown in Figure 2.
Note: Do not tighten hardware.
Parts:
• Cross Brace (#1)
• Left Stand Leg assembly from Step 1
• Right Stand Leg assembly from Step 2
Hardware Qty
• 3" Screws (#12) 4
• Washers (#11) 8
• Nuts (#10) 4
Tools:
• Hex Key (7/32”)
3-1 Attach the Bottom Cross Brace (#1) to the Rear Left Stabilizer (#2) and Rear Right Stabilizer (#3)
using the hardware shown in Figure 3. Make sure that the narrower edge of the Cross Brace
(#1) is closer to the Stand Leg (#4) uprights.
Note: Do not tighten hardware.
step
3
6
Figure 3
7
step
4
Parts:
• Stand Leg and Cross Brace assembly from Step 3
• Center Plate (#17)
Hardware Qty
• 2.5" Screws (#14) 4
• Washers (#11) 8
• Nuts (#10) 4
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
4-1 Install the Center Plate (#17) to both Stand Legs (#4) using the hardware shown in Figure 4.
Note: Make sure that the Center Plate edges are on the outer sides of the legs, and that the logo
on the Plate is right side up.
4-2 Tighten all hardware from Steps 1, 2 and 3 securely.
Figure 4
step
5
8
Parts:
• Stand base assembly from Step 4
• Left Dumbbell Platform (#5)
Hardware Qty
• 2.75" Screws (#13) 2
• Washers (#11) 4
• Nuts (#10) 2
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
5-1 Secure the Left Dumbbell Platform (#5) to left Stand Leg (#4) using the hardware shown in
Figure 5.
Note: Make sure the screw holes in the Platform are toward the center of the stand.
Figure 5
9
step
6
Parts:
• Stand base assembly from Step 5
• Right Dumbbell Platform (#6)
Hardware Qty
• 2.75" Screws (#13) 2
• Washers (#11) 4
• Nuts (#10) 2
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
6-1 Secure the Right Dumbbell Platform (#6) to right Stand Leg (#4) using the hardware shown in
Figure 6.
Note: Make sure the screw holes in the Platform are toward the center of the stand.
Figure 6
step
7
10
Parts:
• Stand assembly from Step 6
• Towel Bar (#7)
Hardware Qty
• 1" Screws (#15) 4
• Washers (#11) 4
• Nuts (#10) 4
Tools:
• Hex Key (7/32”)
• Wrench/Socket (9/16”) or Adjustable Wrench
7-1 Attach the Towel Bar (#7) to the Left Dumbbell Platform (#5) and the Right Dumbbell Platform
(#6) using hardware shown in Figure 7. Hand tighten screws in a cross pattern, to ensure
even fit.
7-2 Tighten all screws securely.
Figure 7
This manual suits for next models
1
Table of contents
Other Bowflex Fitness Equipment manuals
Bowflex
Bowflex Power-Pak Installation and operating instructions
Bowflex
Bowflex TREADCLIMBER 1000 User manual
Bowflex
Bowflex Max Trainer M6 User manual
Bowflex
Bowflex TREADCLIMBER 1000 User manual
Bowflex
Bowflex Motivator 2 User manual
Bowflex
Bowflex TreadClimber TC20 User manual
Bowflex
Bowflex JRNY Installation guide
Bowflex
Bowflex LateralX LX3 User manual
Bowflex
Bowflex SelectTech BD552i User manual
Bowflex
Bowflex Max Trainer M8 User manual
Bowflex
Bowflex BXE216 Installation and operating instructions
Bowflex
Bowflex Max Trainer M7u User manual
Bowflex
Bowflex Max Trainer M6 User manual
Bowflex
Bowflex TreadClimber TC5000 User manual
Bowflex
Bowflex Motivator User manual
Bowflex
Bowflex BDS-220 User manual
Bowflex
Bowflex TC10 User manual
Bowflex
Bowflex SelectTech 552 User manual
Bowflex
Bowflex SELECTTECH User manual
Bowflex
Bowflex TREADCLIMBER 3000 User manual
