Boston Acoustics P4FL User manual

P4FL

Vertical Floor Stand for the P4, Bravo®II, and Bravo Speakers

P4 Assembly Instructions:

This configuration is compatible with Models: P460,

P450, P442, and P430.

•Flat head

Screwdriver

Hardware: (Per Speaker Stand)

Required Tools:

(not included)

•Phillips head

Screwdriver

Speaker

Screw

(short) x 2

Threaded

Machine

Screw x 3

P4FL

Base x 1

P4FL

Vertical

Post x 1

Step One: Attach Base

Attach the base to the vertical

post with the three included

threaded machine screws and

split washers (small) using a

Phillips head screwdriver. The

post has already been threaded

to ease screw installation. Attach

rubber feet to base.

Step Two: Speaker Wire

With the stand still inverted, route

the speaker wirethrough the open-

ing in bottom of the base, down

through, and out the opening in

the post. Leave several extra inches

of speaker wire exposed to ease

connection with the P4 speaker.

Split Washer

(small) x 3

Step Three: Mounting the P4 Speaker

There are two heights available for vertical mounting allowing you

to match the height of the speakers with your television. The

higher option is illustrated on the left and the lower on the right.

The total difference in height is 2-inches (51mm). Due to the weight

of the P4 speaker, it is recommended that the installation be

performed with the P4 speaker laying face down with the grille

removed on a soft surface such as a plush carpeted floor or the P4

shipping carton. Inspect the area where the speaker will lay making

sure that there are no objects that could damage the speakers or

scratch the front of the P4.

1. Position the P4FL close to the P4 speaker as illustrated.

2. Connect the speaker wire to the terminals on the P4 speaker.

3. Mount the speaker to the post by lining up the appropriate

threaded inserts in the back of the P4 speaker with the

machined holes in the post. Use the “P4 Mounting Chart” on

the back page of this manual to determine the correct

threaded inserts to use. Insert the two speaker screws (short)

and tighten. Note: Do not over-tighten the screws.

4. Insert the three hole plugs in the unused mounting holes on

the back of the P4FL post.

5. Take up any slack in the speaker wire by gently pulling the wire

at the opening in the base.

Hole Plug

x 3

Bravo Assembly Instructions:

This configuration is compatible with Models: Bravo II

and Bravo.

Hardware: (Per Speaker Stand)

Speaker

Screw

(long) x 2

Threaded

Machine

Screw x 3

P4FL

Base x 1

P4FL

Vertical

Post x 1

•Pliers

•Flat head

Screwdriver

•Phillips head

Screwdriver

Split Washer

(large)

x 2

1⁄4"-20

Threaded

Nut x 2

Split Washer

(small) x 3

Hole Plug

x 3

Step One: Attach Base

Attach the base to the vertical

post with the three included

threaded machine screws and

split washers (small) using a

Phillips head screwdriver. The

post has already been threaded

to ease screw installation. Attach

rubber feet to base.

Step Two: Speaker Wire

With the stand still inverted, route

the speaker wire through the open-

ing in bottom of the base, down

through, and out the opening in

the post. Leave several extra inches

of speaker wireexposed to ease

connection with the Bravo speaker.

Step Three: Mounting the Bravo Speaker

1. Using the speaker screws (long), washer, and 1⁄4"-20 threaded

nut, mount the Bravo mounting bracket to the P4FL post.

2. Remove the speaker’sgrille by grasping the back of the

cabinet in one hand, while gently pulling the grille away with

the other hand.

3. Connect the speaker wire to the terminals on the Bravo speaker.

4. Align the openings in the back of the speaker with the two

posts protruding from the bracket as shown and attach the

speaker to the bracket by inserting the supplied screws

through the holes in the front of the speaker and into the

bracket as shown.

Note: For detailed instructions on installing the speaker to the wall bracket,

please refer to the Bravo owners manual.

5. Insert the three hole plugs in the unused mounting holes on

the back of the P4FL post.

6. Take up any slack in the speaker wire by gently pulling the wire

at the opening in the base.

Required Tools:

(not included)

Boston, Boston Acoustics, Bravo, and the Boston Acoustics

logo are registered trademarks of Boston Acoustics, Inc.

Specifications aresubject to change without notice.

300 Jubilee Drive

Peabody,MA 01960

U.S.A.

978.538.5000

www.bostonacoustics.com 042-002211-0

If Service Seems Necessary

First, contact the dealer from whom you purchased the speakers. If that is not possible, write to:

Boston Acoustics, Inc.

Attn: Parts and Service

300 Jubilee Drive

Peabody,MA 01960 U.S.A.

Or contact us via e-mail at:

suppor[email protected]

We will promptly advise you of what action to take. If it is necessary to return your P4FL floor stand to the factory,

please ship it prepaid. After it has been repaired, we will return it freight prepaid in the U.S.A. and Canada.

P4 Mounting Chart

Each P4 model features multiple mounting locations on the back of the speaker to accommodate a number of

different attachment methods. Below, the back of each model is shown along with the appropriate screw holes for

use with the P4FL speaker stand.

P450P460 P442 P430

Table of contents

Other Boston Acoustics Speakers manuals

Boston Acoustics

Boston Acoustics CS225 User manual

Boston Acoustics

Boston Acoustics TVee 30 Owner's manual

Boston Acoustics

Boston Acoustics VSi 560 User manual

Boston Acoustics

Boston Acoustics S65 User manual

Boston Acoustics

Boston Acoustics VRi555 User manual

Boston Acoustics

Boston Acoustics DSi460T2 User manual

Boston Acoustics

Boston Acoustics PC520 User manual

Boston Acoustics

Boston Acoustics Lynnfield VR-M50 User manual

Boston Acoustics

Boston Acoustics HSi 255 User manual

Boston Acoustics

Boston Acoustics 5.1 Home Theater Speakers Owner's manual

Boston Acoustics

Boston Acoustics CR57 User manual

Boston Acoustics

Boston Acoustics SE35 User manual

Boston Acoustics

Boston Acoustics HSi S6W2 User manual

Boston Acoustics

Boston Acoustics VS 260 User manual

Boston Acoustics

Boston Acoustics SE95 User manual

Boston Acoustics

Boston Acoustics SE50 User manual

Boston Acoustics

Boston Acoustics HSi250 User manual

Boston Acoustics

Boston Acoustics SX60 User manual

Boston Acoustics

Boston Acoustics VR-MC User manual

Boston Acoustics

Boston Acoustics VRi553 User manual

Boston Acoustics

Boston Acoustics M Series Owner's manual

Boston Acoustics

Boston Acoustics S95 User manual

Boston Acoustics

Boston Acoustics SOUNDWARE S User manual

Boston Acoustics

Boston Acoustics SE75 User manual

Popular Speakers manuals by other brands

argon audio

argon audio IE20 quick start

Denon

Denon SC-N7 owner's manual

Gemline

Gemline Ace 3952 user manual

Focal

Focal ON WALL 300 User manua

HEADRUSH

HEADRUSH Maximus HRSP 5024 manual

SoundLogic

SoundLogic BCCS-6/6395 instruction manual

Peavey

Peavey DTH 218 Specification sheet

Avantree

Avantree Pluto Air user guide

Morel

Morel Integra Series INTEGRA OVATION 4 install guide

Oppo

Oppo SONICA quick start guide

Bose

Bose SoundLink Wireless Music System owner's guide

Rocksteady

Rocksteady Stadium owner's manual

Bowers & Wilkins

Bowers & Wilkins 4 owner's manual

Sonance

Sonance SONOS OUTDOOR Series installation manual

Electro-Voice

Electro-Voice EVID FM4.2 Brochure & specs

Pioneer

Pioneer XW-HTD630 manual

Onn

Onn BWA16AA002 Product guide

HP GL313AA - USB Speakers PC Multimedia quick start guide