Bosch NBN-80052 User manual
DINION IP 8000 MP
NBN-80052 | NBN-80122
en Installation Manual
Table of contents
1Safety 5
1.1 Safety message explanation 5
1.2 Safety precautions 5
1.3 Important safety instructions 6
1.4 FCC and ICES compliance 7
1.5 Notices 8
2Short information 9
3System overview 10
3.1 DINION IP 8000 family 10
3.2 Application variants 10
3.3 Using the camera 11
3.4 Operation with external systems 12
4Planning 13
4.1 Unpacking 13
4.2 Contents 13
4.3 System requirements 13
5Installation 14
5.1 Lens mounting 14
5.2 Mounting the camera 16
5.3 Local storage 17
6Connection 18
6.1 Network (and PoE power) 18
6.2 Auxiliary power 19
6.3 Alarm 20
6.4 Audio 22
6.5 Video monitor 23
6.6 Data 24
7Configuration 25
7.1 Setting the field of view 25
7.1.1 Camera install wizard 25
7.1.2 Using the install wizard 26
7.2 True Day/Night switching 30
7.3 Camera configuration 31
DINION IP 8000 MP Table of Contents | en 3
Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665
7.3.1 Bosch Video Client 31
7.4 Browser connection 32
7.4.1 Establishing the connection 32
7.4.2 Protected network 32
8Troubleshooting 33
8.1 Function test 33
8.2 Resolving problems 33
8.3 Testing the network connection 37
8.4 Customer service 37
8.5 Terminal program 38
9Maintenance 40
9.1 Cleaning 40
9.2 Repair 40
9.3 Reset 40
10 Decommissioning 41
10.1 Transfer 41
10.2 Disposal 41
11 Technical data 42
11.1 Specifications (NBN-80052) 42
11.2 Specifications (NBN-80122) 48
4en | Table of Contents DINION IP 8000 MP
2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems
Safety
Safety message explanation
!
Caution!
Indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
Notice!
Indicates a situation which, if not avoided, could result in
damage to the equipment or environment, or data loss.
Safety precautions
!
Caution!
The Low Voltage power supply unit must comply with EN/UL
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).
!
Caution!
Installation should only be performed by qualified service
personnel in accordance with the National Electrical Code
(NEC 800 CEC Section 60) or applicable local codes.
!
Caution!
Use only a +12 VDC power supply as an auxiliary power source.
The auxiliary power supply unit must be isolated from earth.
1
1.1
1.2
DINION IP 8000 MP Safety | en 5
Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665
Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Follow all warnings before operating the
unit.
1. Clean only with a dry cloth. Do not use liquid cleaners or
aerosol cleaners.
2. Do not install unit near any heat sources such as radiators,
heaters, stoves, or other equipment (including amplifiers)
that produce heat.
3. Never spill liquid of any kind on the unit.
4. Take precautions to protect the unit from power and
lightning surges.
5. Adjust only those controls specified in the operating
instructions.
6. Operate the unit only from the type of power source
indicated on the label.
7. Unless qualified, do not attempt to service a damaged unit
yourself. Refer all servicing to qualified service personnel.
8. Install in accordance with the manufacturer's instructions in
accordance with applicable local codes.
9. Use only attachments/accessories specified by the
manufacturer.
1.3
6en | Safety DINION IP 8000 MP
2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems
FCC and ICES compliance
FCC & ICES Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult the
dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office, Washington,
DC 20402, Stock No. 004-000-00345-4.
1.4
DINION IP 8000 MP Safety | en 7
Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665
Notices
Notice!
Optical elements are sensitive and should be protected at all
times. Do not allow objects to come into contact with glass
surfaces and do not touch optical elements with your fingers.
Notice!
Video loss is inherent to digital video recording; therefore,
Bosch Security Systems cannot be held liable for any damage
that results from missing video information.
To minimize the risk of losing information, we recommend
multiple, redundant recording systems, and a procedure to
back up all analog and digital information.
Notice!
We recommend that memory cards only be used for local
storage of alarm recordings.
1.5
8en | Safety DINION IP 8000 MP
2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems
Short information
This manual has been compiled with great care and the
information it contains has been thoroughly verified. The text
was correct at the time of printing, however, the content can
change without notice. Bosch Security Systems accepts no
liability for damage resulting directly or indirectly from faults,
incompleteness or discrepancies between this manual and the
product described.
Trademarks
All hardware and software product names used in this document
are likely to be registered trademarks and must be treated
accordingly.
More information
For more information please contact the nearest Bosch Security
Systems location or visit www.boschsecurity.com
2
DINION IP 8000 MP Short information | en 9
Bosch Security Systems 2014.09 | v1.0 | AM18-Q0665
System overview
DINION IP 8000 family
The DINION IP 8000 family consists of the following cameras:
– DINION IP starlight 8000 MP for high-performance in
challenging light conditions
– DINION IP ultra 8000 MP for ultra high-definition
These IP cameras operate as network video servers and transmit
video and control signals over Ethernet LANs and the Internet.
The integrated encoder uses H.264 compression technology to
give clear images while reducing bandwidth and storage
requirements.
Application variants
The camera has a choice of application variants that set up the
camera for optimum performance in a specific environment.
Select the application variant best suited to your installation.
The application variant must be selected before any other
changes are made, as the camera reboots automatically and
resets the factory defaults when the application variant is
changed.
The DINION IP starlight 8000 MP has three application variants:
– 5MP (16:9)
– 5MP (4:3)
– 1080p
The DINION IP ultra 8000 MP has three application variants:
– 4K UHD
– 12MP (4:3)
– 1080p
3
3.1
3.2
10 en | System overview DINION IP 8000 MP
2014.09 | v1.0 | AM18-Q0665 Bosch Security Systems
Other manuals for NBN-80052
2
This manual suits for next models
1
Table of contents
Other Bosch Security Camera manuals
Bosch
Bosch DINION IP 7000 HD NBN-71022 User manual
Bosch
Bosch Dinion LTC0335/20 User manual
Bosch
Bosch DINION 5000 User manual
Bosch
Bosch FLEXIDOME AN micro 1000 User manual
Bosch
Bosch AUTODOME IP starlight 5000i IR User manual
Bosch
Bosch LTC-0455-61 User manual
Bosch
Bosch FLEXIDOME IP starlight 7000 VR User manual
Bosch
Bosch LTC 0610/11 User manual
Bosch
Bosch VEI-30 User manual
Bosch
Bosch EXTEGRA IP 9000 FX User manual
Bosch
Bosch VDN-242 Instructions for use
Bosch
Bosch LTC 1462/21 User manual
Bosch
Bosch FLEXIDOME NIN-733 User manual
Bosch
Bosch AUTODOME IP starlight 5000i NDP?5512?Z30C User manual
Bosch
Bosch WZ16 User manual
Bosch
Bosch DINION IP 8000 MP User manual
Bosch
Bosch EX72C7V0922-N User manual
Bosch
Bosch FlexiDomeXF VDC-485V03-20 User manual
Bosch
Bosch VDC-240V03-2/1 User manual
Bosch
Bosch WZ20 User manual
