Bosch LTC-0498-28W User manual

Dinion2X

LTC0498 | LTC0630

en Installation Manual

Dinion2X Table of Contents | en 3

Bosch Security Systems Installation Manual AR18-08-B013 | v1.0| 2009.03

Table of Contents

1Safety 5

1.1 Safety precautions 5

1.2 Important safety instructions 5

1.3 System ground/Safety ground 6

1.4 FCC information 7

2 Introduction 9

2.1 Features 9

3 Installation 11

3.1 Unpacking 11

4 Connection and mounting 13

4.1 Power connection 13

4.1.1 Low voltage cameras 13

4.1.2 High voltage cameras 14

4.2 Video connections 15

4.2.1 Output Video signal 15

4.2.2 Synchronization signal 15

4.3 Alarm and relay connector 16

4.4 Lens mounting 17

4.5 Back focus adjustment 18

4.6 Mounting the camera 19

5 Configuration 21

5.1 Menus 21

5.1.1 Top level menus 21

5.1.2 Menu navigation 21

5.2 Pre-defined modes 23

5.3 Day/Night switching 24

5.4 Camera control communication (Bilinx) 24

5.5 Main menu structure 25

5.5.1 Mode submenu 25

4en | Table of Contents Dinion2X

AR18-08-B013 | v1.0| 2009.03 Installation Manual Bosch Security Systems

5.5.2 ALC submenu 26

5.5.3 Shutter/AGC submenu 27

5.5.4 Day/Night submenu 28

5.5.5 Enhance / Dynamic Engine submenu 30

5.5.6 Color submenu 31

5.5.7 VMD submenu 32

5.6 Install menu structure 34

5.6.1 Language submenu 35

5.6.2 Lens Wizard submenu 35

5.6.3 Synchronization submenu 37

5.6.4 Alarm I/O submenu 37

5.6.5 Connections submenu 38

5.6.6 Test signal submenu 39

5.6.7 Camera ID submenu 40

5.6.8 Privacy masking submenu 40

5.6.9 Defaults submenu 41

6Troubleshooting 43

6.1 Resolving problems 43

6.2 Customer service 43

7 Maintenance 45

7.1 Repairs 45

7.1.1 Transfer and disposal 45

8 Technical Data 47

8.1 Specifications 47

8.1.1 Dimensions 50

8.1.2 Accessories 51

Glossary 53

Dinion2X Safety | en 5

Bosch Security Systems Installation Manual AR18-08-B013 | v1.0 | 2009.03

1Safety

1.1 Safety precautions

1.2 Important safety instructions

Read, follow, and retain for future reference all of the following

safety instructions. Follow all warnings on the unit and in the

operating instructions before operating the unit.

1. Clean only with a dry cloth. Do not use liquid cleaners or

aerosol cleaners.

2. Do not install unit near any heat sources such as radiators,

heaters, stoves, or other equipment (including amplifiers)

that produce heat.

3. Never spill liquid of any kind on the unit.

4. Take precautions to protect the unit from power and

lightning surges.

5. Adjust only those controls specified in the operating

instructions.

6. Operate the unit only from the type of power source

indicated on the label.

7. Unless qualified, do not attempt to service a damaged unit

yourself. Refer all servicing to qualified service personnel.

DANGER!

High risk: The lighting flash and arrowhead within the triangle is

a warning sign alerting you of "Dangerous Voltage" inside the

product that can cause an electrical shock, bodily injury, or

death.

WARNING!

Medium risk: The exclamation mark within the triangle sign

alerts the user to important instructions accompanying the unit.

CAUTION!

Low risk: Alerts the user to the risk of damage to the unit.

6en | Safety Dinion2X

AR18-08-B013 | v1.0 | 2009.03 Installation Manual Bosch Security Systems

8. Use only replacement parts specified by the manufacturer.

9. Install in accordance with the manufacturer's instructions

in accordance with applicable local codes. Use only

attachments/accessories specified by the manufacturer.

Equipment change or modification could void the user's

guarantee or authorization agreement.

1.3 System ground/Safety ground

System (video) ground is indicated by the symbol .

Safety (power) ground is indicated by the symbol .

The system ground is only used to comply with safety standards

or installation practices in certain countries. Bosch does not

WARNING!

Power disconnect for high voltage versions: A unit has power

supplied whenever the power cord is inserted into the power

source. The power cord plug is the main power disconnect for

the unit. For pluggable equipment, install the socket outlet near

the equipment so it is easily accessible.

WARNING!

All-pole power switch: Incorporate an all-pole power switch,

with a contact separation of at least 3 mm in each pole, into the

electrical installation of the building.

CAUTION!

Fuse rating: The branch circuit protection must be secured with

a maximum fuse rating of 16 A. This must be in accordance with

NEC800 (CEC Section 60).

CAUTION!

The Low Voltage power supply unit must comply with EN/UL

60950. The power supply must be a SELV-LPS unit or a SELV -

Class 2 unit (Safety Extra Low Voltage - Limited Power Source).

Dinion2X Safety | en 7

Bosch Security Systems Installation Manual AR18-08-B013 | v1.0 | 2009.03

recommend connecting system ground to safety ground unless

it is explicitly required. However, if the system ground and

safety ground are connected and grounding loops are causing

interference in the video signal, use an isolation transformer

(available separately from Bosch).

1.4 FCC information

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/ TV technician

for help.

Note

Any change or modification of the equipment not expressly

approved by Bosch could void the user's authority to operate

the equipment.

CAUTION!

Connecting System ground to Safety ground may result in

ground loops that can disrupt the CCTV system.

8en | Safety Dinion2X

AR18-08-B013 | v1.0 | 2009.03 Installation Manual Bosch Security Systems

For additional information or to speak to a representative,

please contact the Bosch Security Systems location nearest to

you or visit our web site at www.boschsecurity.com

Disposal - Your Bosch product was developed and

manufactured with high-quality material and components that

can be recycled and reused. This symbol means that

electronic and electrical appliances, which have reached the

end of their working life, must be collected and disposed of

separately from household waste material. Separate collecting

systems are usually in place for disused electronic and

electrical products. Please dispose of these units at an

environmentally compatible recycling facility, per European

Directive 2002/96/EC

Dinion2X Introduction | en 9

Bosch Security Systems Installation Manual AR18-08-B013 | v1.0 | 2009.03

2 Introduction

2.1 Features

The Dinion2X Day/Night camera is a high-performance, smart,

surveillance color camera. It incorporates advanced (20-bit)

digital signal processing and a wide dynamic range CCD sensor

for outstanding picture performance.

The Dinion2X camera is easy to install and ready to use, and

offers the best solution for demanding scene conditions.

Features include:

– 1/3-inch CCD sensor with wide dynamic range (LTC0498)

– 1/2-inch CCD sensor (LTC0630)

– True Day/Night performance with switchable IR filter

– 540 TVL resolution

– Dynamic engine with Smart BLC

– Privacy zones

–Autoblack

– Bilinx (bi-directional coaxial communication)

– Wide operating temperature range

(-20 to +55 °C / -4 to +131 °F)

–Lenswizard

– Lens autodetect

– Six pre-programmed operation modes

– Adaptive dynamic noise reduction

– Genlock including subcarrier locking

– Multiple language on-screen display

– Built-in test pattern generator

10 en | Introduction Dinion2X

AR18-08-B013 | v1.0 | 2009.03 Installation Manual Bosch Security Systems

This manual suits for next models

Table of contents

Other Bosch Security Camera manuals

Bosch

Bosch VDC-455V09-20S User manual

Bosch

Bosch DINION IP 5000 Instructions for use

Bosch

Bosch AVIOTEC IPSTARLIGHT 8000 User manual

Bosch

Bosch FLEXIDOME IP micro 2000 User manual

Bosch

Bosch NEI-Series User manual

Bosch

Bosch VDC-240V03-1 User manual

Bosch

Bosch LTC 0510 Series User manual

Bosch

Bosch AUTODOME IP starlight 5000i NDP?5512?Z30C User manual

Bosch

Bosch Onvif NTC-255-PI User manual

Bosch

Bosch VG4-161-EC00P User manual

Bosch

Bosch BasicDome Series User manual

Bosch

Bosch VBC-255 User manual

Bosch

Bosch 300 Series User manual

Bosch

Bosch LTC 0x35 Series User manual

Bosch

Bosch VEZ Series Guide

Bosch

Bosch AUTODOME IP starlight 5000i User manual

Bosch

Bosch VGA-BUBBLE-CCLR User manual

Bosch

Bosch Autodome IP 4000 HD User manual

Bosch

Bosch MIC Series 440 Installation guide

Bosch

Bosch VG4-100 Series User manual

Bosch

Bosch AN traffic 4000 IR User manual

Bosch

Bosch Dinion LTC0335/20 User manual

Bosch

Bosch MIC Series 550 User manual

Bosch

Bosch LTC 0610/11 User manual

Popular Security Camera manuals by other brands

Okina USA

Okina USA SIR36-870VF650LP user manual

Divio

Divio NDR155PA user manual

Canon

Canon VB-C500D Specifications

Easy Access

Easy Access EasyGuard user manual

Vivotek

Vivotek FD9389-EHV-v2 Quick installation guide

TUYA

TUYA COSMO W2 manual

Eusso

Eusso UNC7500-IR Advanced installation guide

urmet domus

urmet domus 1096/204 user manual

VC VC20 series operating manual

Axis

Axis Q1614 installation guide

ieGeek

ieGeek DD201 manual

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Installation and user guide

Vicon

Vicon V662-D-1 Installation and operation guide

Grundig

Grundig GCH-K0274P owner's manual

Lorex

Lorex VANTAGE LBC7032 quick start guide

4xem

4xem WPT Specifications

Samsung

Samsung SCV-3082 Specifications

Vitek

Vitek VTC-C544 Specifications