Bosch Professional GCY 42 Assembly instructions
IMPORTANT:
Read Before Using
IMPORTANT :
Lire avant usage
IMPORTANTE:
Leer antes de usar
For English Version
See page 2 Version française
Voir page 25 Versión en español
Ver la página 49
Operating/Safety Instructions
Consignes de sécurité/d’utilisation
Instrucciones de funcionamiento y seguridad
1-877-BOSCH99 (1-877-267-2499)
www.boschtools.com
GCY42
Call Toll Free for
Consumer Information
and Service Locations.
Pour obtenir des informa-
tions et les adresses de
nos centres de service
après-vente, appelez ce
numéro gratuit.
Llame gratis para obtener
información para el con-
sumidor y ubicaciones de
servicio.
2610051886.indd 1 3/8/19 2:18 PM
2
Safety Symbols
The definitions below describe the level of severity for
each signal word. Please read the manual and pay atten-
tion to these symbols.
!
This is the safety alert symbol. It
is used to alert you to potential
personal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury
or death.
DANGER indicates a hazardous
situation which, if not avoided,
will result in death or serious
injury.
WARNING indicates a hazardous
situation which, if not avoided,
could result in death or serious
injury.
CAUTION indicates a hazardous
situation which, if not avoided,
could result in minor or moder-
ate injury.
2610051886.indd 2 3/8/19 2:18 PM
3
Table of Contents
General Safety Rules...................................................4
Getting to Know your Connectivity Module ...................10
Assembly................................................................13
Operating Instructions ..............................................15
Maintenance and Storage ..........................................22
Warranty information................................................23
2610051886.indd 3 3/8/19 2:18 PM
4
Only use Button/coin cell 3V lithi-
um CR2032 battery. Do not use
any other button/coin cells or other forms of electrical power
supply.
Ensure that battery replacement
is carried out properly. There is a
risk of explosion.
Chemical Burn Hazard. Keep bat-
teries away from children. This
product contains a lithium button/coin cell battery. If a new
or used lithium button/coin cell battery is swallowed or en-
ters the body, it can cause severe internal burns and can lead
to death in as little as 2 hours. If you think a battery might
have been swallowed or placed inside any part of the body,
seek immediate medical attention.
Always completely secure the
connectivity compartment. If the
General Safety Rules
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE
REFERENCE
2610051886.indd 4 3/8/19 2:18 PM
5
connectivity compartment does not close securely, stop us-
ing the product, remove the battery, and keep it away from
children.
When discarding batteries, insu-
late the ‘+’ and ‘–’ terminals with
insulating tape. When disposed of improperly, lithium bat-
teries may short, causing them to become hot, burst or ignite.
Never dispose of the batteries in a
fire or expose to high heat. The
batteries may explode.
Follow all instructions and warn-
ings provided by your Bluetooth®
device manufacturer. Failure to follow recommended pro-
cedures could result in personal injury or property damage.
Exercise extreme caution when
using Bluetooth® devices to con-
trol or change power tool functions. Operation of the de-
vice may be in a different area than the paired power tool.
Paired devices may have functionality which allows timed
event programming, including automatically powering on
(e.g. flood light). Depending upon the power tool, these un-
attended operations or function changes without direct line
of sight to the paired tool could result in personal injury or
property damage.
SAVE THESE INSTRUCTIONS
2610051886.indd 5 3/8/19 2:18 PM
6
Always check tool settings before
use. Settings may be different
than when the tool was last used. The connectivity module
enables transfer of data and settings based on Bluetooth®
wireless technology. With module installed, select tool set-
tings may be changed remotely by a paired Bluetooth® de-
vice and user installed app.
The connectivity module GCY42
is equipped with a radio interface.
Local operating restrictions, e.g. in military sites or hos-
pitals, are to be observed. Transmitters have demonstrat-
ed an ability to unintentionally interfere with other devices.
THINK SAFETY
SAFETY IS A COMBINATION OF OPERATOR COMMON
SENSE AND ALERTNESS AT ALL TIMES WHEN THE CON-
NECTIVITY MODULE IS BEING USED.
SAVE THESE INSTRUCTIONS
2610051886.indd 6 3/8/19 2:18 PM
7
FCC Caution
The manufacturer is not responsible for radio interference
caused by unauthorized modifications to this equipment.
Such modifications could void the user’s authority to oper-
ate the equipment.
This device complies with Part 15 of the FCC Rules. Opera-
tion is subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, in-
cluding interference that may cause undesired operation.
NOTE! This equipment has been tested and found to com-
ply with the limits for a Class B digital devices, pursuant to
Part 15 of the FCC rules. These limits are designed to pro-
vide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular in-
stallation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
SAVE THESE INSTRUCTIONS
2610051886.indd 7 3/8/19 2:18 PM
8
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweenthe equipmentandre-
ceiver.
• Connecttheequipmentintoanoutletonacircuitdierent
from that to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnician
for help.
“Exposure to Radio Frequency (RF) Signals: The wireless
device is a radio transmitter and receiver. It is designed and
manufactured not to exceed the emission limit for exposure
to radio frequency (RF) energy set by the Ministry of Health
(Canada), Safety Code 6. These limits are part of compre-
hensive guidelines and established permitted levels of RF
energy for the general population.
These guidelines are based on the safety standards previ-
ously set by international standard bodies. These standards
include a substantial safety margin designed to assure the
safety of all persons, regardless of age and health.
This device and its antenna must not be co-located or oper-
ating in conjunction with any other antenna or transmitter.
SAVE THESE INSTRUCTIONS
2610051886.indd 8 3/8/19 2:18 PM
9
SAVE THESE INSTRUCTIONS
Industry Canada
This device complies with Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including inter-
ference that may cause undesired operation of the device.
The Bosch GCY42 with an FCC ID number TXTGCY42 is an
approved Bluetooth® low energy module for usage in power
tools. You can find this FCC ID on the back side of the GCY42
as shown in the drawing.
2610051886.indd 9 3/8/19 2:18 PM
10
Product Features
The numbering of the product fea-
tures refers to the illustrations on
the graphics pages.
1Button/coin cell battery.
2Connectivity module GCY42.
3Placeholder (part of the power
tool – not included).
4Cover of connectivity module
(part of the power tool – not in-
cluded).
Getting to Know your GCY42 Connectivity
Module
1
2
4
3
2610051886.indd 10 3/8/19 2:18 PM
Other manuals for Professional GCY 42
4
Table of contents
Languages:
Other Bosch Control Unit manuals
Bosch
Bosch Rexroth IndraDrive CSB02 Technical manual
Bosch
Bosch FLM-420-RLV1-D Troubleshooting guide
Bosch
Bosch MKK-040 User manual
Bosch
Bosch CL400 User manual
Bosch
Bosch Rexroth VT-HNC100 3X Series User manual
Bosch
Bosch Rexroth 4WRPD User manual
Bosch
Bosch FLM-420/4-CON-S User manual
Bosch
Bosch Control 8313 Instruction Manual
Bosch
Bosch Rexroth IndraControl S67 Series User manual
Bosch
Bosch CM751B How to use
Bosch
Bosch MS 3 Sport GT3 Cup User manual
Bosch
Bosch Rexroth LFA DB Series User manual
Bosch
Bosch Rexroth IndraControl XFE 01.1 Series User manual
Bosch
Bosch Rexroth VKK Series User manual
Bosch
Bosch FLM-420-RLV1-E User manual
Bosch
Bosch ICP-MAP5000-2 User manual
Bosch
Bosch rexroth DB20K.1X E Series User manual
Bosch
Bosch Rexroth DB 52 3X E Series User manual
Bosch
Bosch Rexroth H-4WEH...XE Series User manual
Bosch
Bosch CM255B How to use
Popular Control Unit manuals by other brands
Festo
Festo Compact Performance CP-FB6-E Brief description
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Quick installation guide
JS Automation
JS Automation MPC3034A user manual
JAUDT
JAUDT SW GII 6406 Series Translation of the original operating instructions
Spektrum
Spektrum Air Module System manual
BOC Edwards
BOC Edwards Q Series instruction manual
KHADAS
KHADAS BT Magic quick start
Etherma
Etherma eNEXHO-IL Assembly and operating instructions
PMFoundations
PMFoundations Attenuverter Assembly guide
GEA
GEA VARIVENT Operating instruction
Walther Systemtechnik
Walther Systemtechnik VMS-05 Assembly instructions
Altronix
Altronix LINQ8PD Installation and programming manual
