Bosch CM255B How to use

CM255B

Factory Default Module

Security System

Installer Reference Guide

Security Systems

CM255B Installer Reference Guide

2Bosch Security Systems 10/12 CM255BIRG FTR1.1

Selected Solution control panels include a software option that when selected will disable the factory defaulting op-

tion. If this option has been set, then you must know the current installer PIN code to access programming mode or

to default the panel. Table 2 lists the current panels which support the CM255B default module.

To determine of the panel has been factory default disabled, remove all power to the panel and then re-apply the

power. If the on board relay pulses or clicks ve times then defaulting has been disabled.

In the eld many situations arise where it is not possible to determine the current installer PIN code. Until now, the

only remedy for this was to remove the control panel and return it to the distributor for factory defaulting. Panel

removal, transportation costs, installer labour and the possibility of damage during transit make this is a costly exer-

cise.

The CM255B factory default module has been designed to eliminate the need to un-wire the control panel or spend

the time and money returning it to the factory for defaulting.

Indicators

The CM255B includes Red and Green indicators which identify the condition of the module.

Module Indicators

Indicator Condition Action

Red LED ON Steady Module has already been used and can’t be used again.

Discard module.

Green LED ON Steady

Default module is good.

Remove power to panel and then re-apply to initiate the defaulting

procedure.

Red & Green LEDs Alternate Flashing Factory defaulting initiated, module can be removed and discarded.

Table 1: Module Indicators

The CM255B is a ONE TIME USE ONLY device. Discard after use!

Testing

If required it is possible to test the state of the CM255B module to see if it has already been used. To do this you

must make sure that the panel is powered up and running BEFORE connecting the CM255B module. Once connect-

ed, if the Green indicator is ON then the module is good and if the Red indicator is ON then the module has been

used and should be discarded.

Operation

Before you are able to use the CM255B you will need to open the control panel cabinet and locate the port on the

circuit board labelled“Serial Port” or “Direct Link Port”.

WARNING all current control panel programming may be be lost if you continue.

Read this sheet completely before proceeding.

1) Remove battery and AC power from the control panel.

2) Plug the CM255B into the connector marked “Serial Port” or “Direct Link Port” paying attention to orientation.

See Figure 1.

3) Apply AC power to the control panel and connect the battery.

4) The red and green indicators on the CM255B should start to ash.

If only the RED indicator comes on then the CM255B has already been used and should be discarded.

5) Once the RED and GREEN indicators are ashing remove the CM255B and discard.

CM255B - Factory Default Module

CM255B Installer Reference Guide

Bosch Security Systems 10/12 CM255BIRG FTR1.1

N12138N12138 RoHS

In the interest of ongoing product development this

document is subject to change without notice.

Compatibility

The CM255B is compatible with the following Solution control panels. For more information please contact your

nearest Bosch branch or Bosch security products distributor.

CM255B Module Compatibility

Panel Type Supported Default Type Performed

Solution 16i Yes Complete Factory Default

Solution 16+ Yes Complete Factory Default

Solution 64 Yes Complete Factory Default

Solution 144 Yes Installer code & RAS Pin Defaulted Only

Table 2: CM255B Module Compatibility

Warranty

There is no warranty provided with this product because of its disposable nature. Once used the module should be

discarded.

CM255B Connection Diagram

GSP

N12138

P/Nº:

MFG:

CC600B

12 Oct 2012

SOLUTION 144

Intrusion Control Panel

VER: 2.00

RoHS



Green LED

Red LED

10 Pin

Serial Port

CM255B Default Module

Connect Here

Control Panel

Figure 1: CM255B Connection Diagram

Bosch Security Systems

25 Huntingwood Drive

Huntingwood, NSW 2148

Australia

Phone: +612 9672 1777

Facsimile: +612 9672 1717

CM255BIRG

Issue FTR1.1

Other Bosch Control Unit manuals

Bosch

Bosch SE352 User manual

Bosch

Bosch ETT 223 User manual

Bosch

Bosch Rexroth M-2SMM6 SO711 Series User manual

Bosch

Bosch ConnectModule BCM3100 User manual

Bosch

Bosch CM744B How to use

Bosch

Bosch MM100 Service manual

Bosch

Bosch FLM-420-RLV1-D Troubleshooting guide

Bosch

Bosch AMC2 4W-EXT User manual

Bosch

Bosch Rexroth IM24V User manual

Bosch

Bosch FLM-420-I8R1-S User manual

Bosch

Bosch CCU-Modul Operating manual

Bosch

Bosch Rexroth 4WS2EM 10 Series User manual

Bosch

Bosch PAVIRO PVA-1WEOL Installation and operation manual

Bosch

Bosch rexroth PSK Gen 2 User manual

Bosch

Bosch D9127U User manual

Bosch

Bosch Rexroth IndraControl XFE 01.1 Series User manual

Bosch

Bosch Rexroth M SED 10 XN Series User manual

Bosch

Bosch Rexroth PSI 6500 Series Manual

Bosch

Bosch VCU MS 50.4P User manual

Bosch

Bosch Rexroth 4WS2EM 10 Series User manual

Bosch

Bosch D8125 Quick start guide

Bosch

Bosch FLM-420-I2-E User manual

Bosch

Bosch ConnectModule Owner's manual

Bosch

Bosch Rexroth 3DREP 6 XE Series User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual