Bosch Conettix C900V2 User manual

Quick Start Guide

1Contact the

Central Station Disconnect Power

Before installing the C900V2,

disconnect all power to the control

panel.



Start Here

C900V2 Dialer Capture Module

This is the Quick Start Guide for the C900V2 Dialer Capture Module. The C900V2 links the digital dialer (data output) from your

security control panel to an Ethernet connection on a local-area network (LAN). This allows communication over the Internet.

If you encounter any problems during this installation, refer to the C900V2 Dialer Capture Module Installation Guide

(P/N: F01U003472).

Before installing the C900V2, contact your central station.

Locate the eight-character NNC number on the label of the

C900V2 EEPROM, and give that number to the central station.

BOSCH 2003

34296K

V1.11

000000AA

BOSCH 2003

34296K

V1.11

000000AA

Record your NNC

number here.

Ask your central station for its preferred supervision poll

period.

Ask your central station for your eight-digit application ID

number, and record it here.

75 seconds 240 seconds

Mount the C900V2

Connect to the

Control Panel Connect to the Router

Connect an Ethernet cable from the RJ-45 Ethernet jack

on the C900V2 (marked ETHERNET) to a port on a router

that provides a connection to the Internet.

For compatible router information:

www.C900V2.com/faq.html

Control Panel C900V2

BOSCH 2003

34296K

V1.11

000000AA

www.boschsecuritysystems.com

F01U013273B

2. Slide the tabs at the top of the mounting plate over

the top lip of the control panel enclosure door.

3. Position the mounting plate on the side farthest from

the door hinge.

Connect a telephone cord from the C900V2 RJ-45 (PANEL)

jack to the digital dialer connector on the control panel.

BOSCH 2003

34296K

V1.11

000000AA

C900V2 Router

12345678910

1 2 3 4 5 6 7 8 9 10

12345678910

1 2 3 4 5 6 7 8 9 10

12345678910

1 2 3 4 5 6 7 8 9 10

12345678910

1 2 3 4 5 6 7 8 9 10

12345678910

1 2 3 4 5 6 7 8 9 10

6Conﬁgure the Dialer Protocol

1 2 3 4 5 6 7 8 9 10

OFF ON

ADT-SIA

Set switches 1, 2, 3, and 10 ON.

BFSK (1400 Hz ACK Tone)

Set switches 2, 4, and 10 ON.

BFSK (2300 Hz ACK Tone)

Set switches 2 and 10 ON.

DTMF (Includes Contact ID,

High Speed, and 4/2 Express)

Set switches 3 and 10 ON.

DTMF (where dialer retransmits

quickly - includes Contact ID, High

Speed, and 4/2 Express)

Set switches 3, 4, and 10 ON.

FBI Superfast DTMF

(1400 Hz ACK Tone)

Set switches 2, 3, 4, and 10 ON.

FBI Superfast DTMF

(2300 Hz ACK Tone)

Set switches 2, 3, and 10 ON.

Pulse 3/1, 3/1 Checksum

(1400 Hz ACK Tone)

Set switches 1, 4, and 10 ON.

Pulse 3/1, 3/1 Checksum

(2300 Hz ACK Tone)

Set switches 1 and 10 ON.

Pulse 4/2

(Long 1400 Hz ACK Tone)

Set switches 1, 3, 4, and 10 ON.

Pulse 4/2

(Long 2300 Hz ACK Tone)

Set switches 1, 3, and 10 ON.

Radionics Modem II

Set switches 4 and 10 ON.

Radionics Modem IIe and

Modem IIIa2

Set switch 10 ON.

Robofon

Set switches 2, 3, and 4 ON.

Seriee DTMF

Set switches 1, 2, and 3 ON.

Seriee FSK

Set switches 1, 2, 3, and 4 ON.

SIA Bell 103

(110/300 baud, 2016 Hz ACK Tone)

Set switches 1, 2, and 10 ON.

SIA Bell 103

(110/300 baud, 2083 Hz ACK Tone)

Set switches 1 and 2 ON.

SIA V.21 (110/300 baud)

Set switches 1, 2, and 4 ON.

Telim

Set switches 2 and 3 ON.

Locate DIP switches 1 through 10 and set all switches OFF.

Locate the illustration below that matches the dialer format for

your control panel and set the appropriate switches ON.

Conﬁgure Using the Web

BOSCH 2003

34296K

V1.11

000000AA

C900V2 Router

Connect to Power Supply

BOSCH 2003

34296K

V1.11

000000AA

C900V2Control Panel

Set Supervision

Poll Period

12345678910 12345678910

Connect Local Telephone

BOSCH 2003

34296K

V1.11

000000AA

BOSCH 2003

34296K

V1.11

000000AA

• Connect the telephone to

the C900V2 TELCO jack.

• Set switch 5 ON.

• No telephone

connection

• Set switch 6 ON.

1 2 3 4 5 6 7 8 9 10

12345678910



Set the poll period for your central station (Step 1).

75 seconds 240 seconds

Set switches 8 and 9 ON. Set switches 7, 8, and 9 ON.

1. Connect the +V and –V terminals

on the C900V2 to the appropriate

terminals on the control panel.

2. Connect the C900V2 ground

terminal to earth ground in the

control panel enclosure.

3. Reconnect power to the control

panel.

F01U013273B

Installation Complete

1Check Status

• Use your computer’s web browser to visit

www.c900v2.com

• Follow the instructions to initialize your central station

account.

• Use your application ID number from Step 1.

BOSCH 2003

34296K

V1.11

000000AA

System Dialer

• The System LED should be ﬂashing green at 5 Hz.

• The Dialer LED should be solid green.

• Verify that the control panel is under central station

supervision by generating a test message from the control

panel.

• Conﬁrm that the central station received the test message.

Other manuals for Conettix C900V2

Other Bosch Control Unit manuals

Bosch

Bosch CM746B How to use

Bosch

Bosch ISM 1 User manual

Bosch

Bosch Rexroth DB 5X XC Series User manual

Bosch

Bosch MC 400 User manual

Bosch

Bosch Rexroth IndraControl VAC 05.1 User manual

Bosch

Bosch D9127U User manual

Bosch

Bosch Rexroth NYM04.1-5PW-NNNN-NY4125 User manual

Bosch

Bosch KTS Truck User manual

Bosch

Bosch Rexroth IndraControl VCP 05.2 Technical manual

Bosch

Bosch FLM-420/4-CON-S User manual

Bosch

Bosch D7039 User manual

Bosch

Bosch Rexroth IndraControl XFE 01.1 Series User manual

Bosch

Bosch GCY 30-5 T Assembly instructions

Bosch

Bosch KTS 5a Series User manual

Bosch

Bosch D9127U User manual

Bosch

Bosch B426 User manual

Bosch

Bosch Rexroth VKK Series User manual

Bosch

Bosch DCU 220 Setup guide

Bosch

Bosch IOS 0232 A User manual

Bosch

Bosch CFB 840 User guide

Bosch

Bosch Rexroth R-IB IL 24 PSDO 8-PAC User manual

Bosch

Bosch REXROTH EFC 610 Series User manual

Bosch

Bosch Rexroth 4WS2EM 10 Series User manual

Bosch

Bosch FLM-420-O2-D User manual

Popular Control Unit manuals by other brands

Festo

Festo Compact Performance CP-FB6-E Brief description

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Quick installation guide

JS Automation

JS Automation MPC3034A user manual

JAUDT

JAUDT SW GII 6406 Series Translation of the original operating instructions

Spektrum

Spektrum Air Module System manual

BOC Edwards

BOC Edwards Q Series instruction manual

KHADAS

KHADAS BT Magic quick start

Etherma

Etherma eNEXHO-IL Assembly and operating instructions

PMFoundations

PMFoundations Attenuverter Assembly guide

GEA

GEA VARIVENT Operating instruction

Walther Systemtechnik

Walther Systemtechnik VMS-05 Assembly instructions

Altronix

Altronix LINQ8PD Installation and programming manual

Eaton

Eaton Powerware Series user guide

WAGO

WAGO 750-407/040-000 manual

Sony

Sony CCU-590 Operation manual

Graco

Graco 25D614 instructions

Task Force Tips

Task Force Tips YE-RF-900 Instructions for installation, safe operation and maintenance

Shini

Shini SPV-U Series manual