Bodet WORLD STYLE User manual
WORLD STYLE
Multi time-zone clock
Quartz independent or radio
Irig B / Afnor receiver
On receipt, check carefully that the product has not been damaged during transport and, if necessary,
submit reservations to the carrier.
B.P. 1
49340 TRÉMENTINES
FRANCE
Tél. : (33) 2 41 71 72 00
Fax : (33) 2 41 71 72 02
www.bodet.com
Réf.: 605418 I
Table of contents
1 - CHECKING THE EQUIPMENT SUPPLIED .............3
2 - ELECTRICAL SAFETY STANDARDS ................3
3 - WORLD STYLE CLOCK INSTALLATION ..............4
3.1 - Wall support installation :......................5
3.2 - Ceiling bracket installation :.....................5
4 - ELECTRICAL CONNECTIONS ....................5
4.1 - Power supply ............................5
4.2 - External synchronisation.......................6
4.3 - Irig B / AFNOR coded time output (Independent version) ......7
5 - DISPLAYS AND TESTING CONFIGURATION ............7
5.1 - Setting the time :...........................8
Independent clock : ..........................8
IRIG B/AFNOR receiver clock : ....................8
5.2 - Configuration menu of displays ...................8
5.2.1 - Selecting the summer / winter time changes :.........9
5.2.2 - Example of programming: programmable mode .......12
5.2.3 - Selecting the time difference :................13
5.3 - Testing ...............................13
5.4 - Annex for time difference......................14
6 - TECHNICAL CHARACTERISTICS .................16
7 - ADJUSTING THE LIGHT INTENSITY ................18
8 - BACKUP ...............................18
9 - PRECAUTIONS FOR USE AND MAINTENANCE .........18
10 - WHAT TO DO IF...?.........CHECK : ................19
2
1 - CHECKING THE EQUIPMENT SUPPLIED
On receipt, check carefully that the product you received fits with what you have
ordered :
nWorld Style Clock model : 3, 4, 5 or 6 cities.
nClock version: Quartz independent or IRIG B/AFNOR coded time receiver.
nText sticker marking for each city.
nColour of diodes (red, yellow, green, blue).
nIf you have chosen an option: France Inter or DCF synchronisation antenna,
ceiling bracket or double sided bracket.
2 - ELECTRICAL SAFETY STANDARDS
nInstallation and maintenance of this equipment should only be carried out by
qualified personnel.
nSince the World Style clock is connected to a mains power supply, its
installation must comply with standard IEC 364 (NFC 15.100 for France).
nIndoor assembly (IP 41).
nThe power supply for this clock should include a max. 6A live neutral circuit
breaker, which can be quickly accessed upstream of the power line,
live/neutral interlocked. This circuit breaker must be switched off during
maintenance.
nThis equipment should be fixed in place before switching on.
nConnection of the earth on the installation according to diagram EE or EN
(earth/earth or earth/neutral).
nThis product should be installed in a residential, commercial or light industrial
environment.
Bodet accepts no responsibility for any use not in compliance with these
instructions.
Any modification to the product will invalidate the guarantee
3
3 - WORLD STYLE CLOCK INSTALLATION
Before deciding on the location, ensure good legibility of the
clock with regard to the angle of reading (120o) and possible
reflections of light. This clock is intended for installation
indoors.
Fixing holes position of wall mounting plate
Lengths in mm HGE
3 cities 176,5 420 773
4 cities 260 520 1040
5 cities 279,5 826 1307
6 cities 374 826 1574
4
64
130
105
210
76
=
=
2 oblong holes
Ø7 x 5
Cable entry
3.1 - Wall support installation :
Having loosened screw (B), unhook the clock from its wall bracket, then
remove the connectors.
Fix bracket (A) to the chosen location on the wall after threading the cables
through the cable carrier (F).
3.2 - Ceiling bracket installation :
The ceiling hanging adjusts to bracket (A) in the same way as when
wall hanging. Warning: do not forget to first put the cables through
the conduit on the bracket before fixing.
Having loosened screw (B), unhook the clock from its wall bracket,
then remove the connectors.
Fix bracket (A) to the chosen location on the wall after threading the
cables through the cable carrier (F).
4 - ELECTRICAL CONNECTIONS
4.1 - Power supply
nRemove the black protective cover on the terminal block (P).
nConnect the 230 Volts 50/60 Hz mains power supply (depending on the
model) to the terminal block (maximum wire cross section 1.5 mm² with 5 mm
bare).
nReplace the protective cover. Block the wires with cable clips.
N.B. :The mains supply unit for this display must include a max. 6A
live/neutral interlocked circuit breaker. This circuit breaker must be
switched off during maintenance.
The electronic card for each display is protected by a 0.8A 250 V fuse (F1).
The world clocks have been designed for a mains power supply of 230 Volts
± 10 % (depending on the model). For example, 230 V clocks will work
equally well in countries where the nominal mains voltage is 220 Volts or 240
Volts.
5
4.2 - External synchronisation
The clock can be synchronised via a radio antenna or an IRIG B/AFNOR
network.
nWith a France Inter / DCF radio antenna or
FI/DCF output on MIC GPS : connect the 2 wires
of the antenna or the Mic GPS to the radio input of
the world clock. (Refer to the diagram on page 4
ref. L)
Refer to the radio antenna instructions for
positioning the antenna.
nWith a France Inter / DCF radio antenna or
FI/DCF output on MIC GPS : connect the 2 wires
of the antenna or the Mic GPS to the radio input of
the world clock (Refer to the diagram on page 4
ref. L).
Refer to the radio antenna instructions for
positioning the antenna.
Note: A fixing hole is provided on the lefthand side
of the World clock for fixing the FI / DCF antenna. Thread the antenna cable
through the hole (ref. F page 4) on the wall bracket.
6
See details according to
the synchronisation type
4.3 - Irig B / AFNOR coded time output (Independent version)
An independent clock can synchronise another IRIG B / AFNOR receiver.
Connect the 2 wires for the IRIG B/AFNOR signal to terminal block (L) on the
transmitting World clock, as well as to terminal (L) on the world receiver clock.
5 - DISPLAYS AND TESTING CONFIGURATION
For models 3 to 6 cities, each display is linked to a keyboard with 2 keys “+”
and “Select” to ensure programming and light intensity adjustment (4 levels).
For the “radio quartz independent” clock versions an additional keyboard is
positioned on the lefthand side of the box in order to adjust the time base (no
keyboard for IRIG B/AFNOR coded time receiver versions).
For IRIG B/AFNOR coded time versions :
configure the coded time generator (master clock or world clock) so that it
distributes GMT time. Do not programme the summer / winter time change.
Carry out installation and electrical connections before setting the time.
7
World clock master World clocks receiver
View from above
2 adjustment keys on the left-hand
side of the box. Independent quartz
model only
Keyboard with 2 keys “+” and “Select” for
each display (interior edge).
5.1 - Setting the time :
Independent clock :
nWhen switched on the clock is automatically set to the correct time. With a
radio antenna, the time is automatically synchronised.
nThe 2 keys “+” and “Select” on the lefthand side of the box are used to adjust
the time displayed (Correcting the time if there is any discrepancy).
Pressing “Select”: decreases the time readout by one minute with each
pressure, altering the hour readout accordingly as it goes back. Warning :
wait 3 seconds to display the readout.
Pressing on “+” : increases the time readout by one minute with each
pressure, altering the hour readout accordingly as it goes forwards.
Warning : wait 3 seconds to display the readout.
The second counter is reset to zero with each pressure on “+” or “Select”.
IRIG B/AFNOR receiver clock :
The readouts give the time in the corresponding city as soon as power is
switched on and on reception of the time code from the master clock or World
clock.
nWarning: in the event of loss of AFNOR signal, each display will operate
independently for 1 hour before the readout disappears. Only the separating
dots in the centre of the display remain lit, showing that the clock is still on.
nThe World clock is programmed in the factory in order to configure each
display according to the name of the city required (city name on sticker).
nIn the event of the time or time change not agreeing, refer to paragraph B
below for how to configure the displays.
5.2 - Configuration menu of displays
Each display is configured separately. Repeat programming below for the
different World clock displays according to the number of cities.
nAccess the configuration menu for each display : press the “Select” key and
while holding it down, then press the “+” key for 3 seconds. (keyboard
situated below the corresponding display).
The World clock calculates and displays the local time corresponding to the
city according to the GMT time received with the summer / winter changes
and the time difference programmed for each display.
8
5.2.1 - Selecting the summer / winter time changes :
Using the “+” key, select the zone acting as reference for the summer/winter
time change dates, then confirm by pressing the “Select” key..
Reference Zone Display
No time change
Europe time change
United States/Canada time change
Programmable mode time change
or time changes at fixed dates.
Rules followed by Styles clocks to determine the summer periods :
Nota : for GMT, EUR, USA selection, see also the chapter 5.2.3 selecting the time
difference (page 13).
–G.M.T. mode :No winter / summer change.
–Europe mode (Eur) : from the last Sunday in March to the last Sunday
in October. The time change takes effect at 1 o’clock GMT. (In March
at 2 o’clock local time, forward + 1 hour. In October at 3 o’clock local
time, back – 1 hour).
Nota : Europe is divided in 3 hourly groups :
Continental Europe : France, Germany, Spain, ...
Western Europe : England, Ireland, Portugal, ...
Eastern Europe : Finland, Greece, ...
–United States / Canada Mode (USA): from the second Sunday of
March to the first Sunday of November. The time change takes effect
at 2 o’clock, local time.
–Programmable Mode (PrG): Every year dates for the hour change are
automatically calculated according to the programming below.
a) repetitive mode :
- selection of month (1 to 12) January (1) to December (12).
- selection of the day number (1 to 5) for the 1st, 2nd, 3rd, 4th or
last (5) of the month)
-selection of the day type (1 to 7) for Monday (1) to Sunday (7).
9
b) fixed date mode : input of an exact date for the summer time
change and an exact date for the winter time change.
The dates are defined each year in the country concerned.
For the 2 modes –1hr in summer to winter and +1hr in winter to
summer.
The time changes take effect at 2.00am local time.
Time changeover in PRG mode :
Step Display
1To access the configuration menu, press the “Select”
key and while holding it down, then press the “+” key for
3 seconds for each keyboard situated below the display.
Display (2nd digit) flashes to start up programming
2Press “+” to select the time change month choice of 1 to
12 (e.g. March 3 for the Northern Hemisphere and
October 10 for the Southern Hemisphere).
3Confirm with “Select”, the 3rd digit flashes
4Press “+” to select the 1st, 2nd, 3rd, 4th or last (5th) day of
the week or the fixed date (F) for the time change.
If choice is 1 to 5, go to the following step.
If choice is F, go to step 9.
5Your selection of the day (the 2nd of the month) in the
month flashes.
6Confirm with “Select”, the last digit flashes.
10
Table of contents
Other Bodet Clock manuals
Bodet
Bodet 10 User manual
Bodet
Bodet Profil 730 User manual
Bodet
Bodet HMS LED 10 User manual
Bodet
Bodet Profil 930 User manual
Bodet
Bodet Profil TGV 950 User manual
Bodet
Bodet Profil 960 User manual
Bodet
Bodet Profil 730 User manual
Bodet
Bodet Style 12 User manual
Bodet
Bodet 5 Seconde User manual
Bodet
Bodet Profil 730 OP User manual
Bodet
Bodet Opalys 14 User manual
Bodet
Bodet Profil 930 User manual
Bodet
Bodet Cristalys User manual
Bodet
Bodet Opalys 7 User manual
Bodet
Bodet Style 12 User manual
Bodet
Bodet Profil 960 User manual
Bodet
Bodet Profil 930 L User manual
Bodet
Bodet 5 Seconde User manual
Bodet
Bodet Profil 930 L User manual
Bodet
Bodet Style 7 Date User manual
