BlueTrek Sense User manual

EC - Declaration of Conformity

We, ModeLabs Technologies Ltd of

31/F China Online Centre,

333 Lockhart Road,

Wan Chai, Hong Kong

declare under our sole responsibility that our product

BLUETREK SENSE

to which this declaration refers is in conformity with the appropriate standards

EN300 328-02

EN301 489-17

EN301 489-01

EN50371

EN60950

Following the provisions of Radio and Telecommunications Terminal Equipment directive

1999/5/EC.

September 2007

Guillaume Ponticelli, Director of Development

FCC/ Industry Canada Notice

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference. (2) This device must accept

any interference received, including interference that may cause undesired operation.

In compliance with Industry Canada regulations, technical specifications have been

provided in a declaration of conformity.This does not imply that Industry Canada approved

the equipment.

Caution: Changes or modifications to this Bluetooth® headset not expressly approved by

the party responsible for compliance could void the user’s authority to operate it.

Bluetooth® is a trademark owned by Bluetooth SIG, Inc. and is used by the manufacturer

under license.

1 I BLUETREK SENSE

English

Introduction

The BLUETREK® SENSE headset is a wireless headset based on the Bluetooth® technology.

It complies with Bluetooth® 1.2 protocol, supporting Headset and Hands-free profile.

A built-in voice alert is an advanced feature that is now available on your headset. A

recorded voice reminds you of the actions in your headset. For details, please refer to

“Voice alert” section of this manual.

Sensitive Key (TALK button)

Main button

Indicator light

The Sensitive key will automatically lock when your headset is connected to a phone and

left idle for more than 20 seconds.To unlock the headset, double click on the Sensitive key.

Your headset will also be unlocked automatically when there is an incoming call.

Before using your headset for the first time

-You must charge it continuously for about 4 hours, until the red indicator light turns off.

Please refer to the “Charging the BLUETREK® SENSE” section of this manual.

-Pair the headset with a mobile phone. Please refer to the “Pairing the BLUETREK® SENSE”

section of this manual.

Charging the BLUETREK® SENSE

Please connect the charger to the headset and to the main. During the charge, the

indicator light is red. The indicator light will turn off when the charge is complete.

During subsequent charges, the charging should take approximately 3 hours.

When you hear a low-tone beep (or the voice alert if activated) in your headset at regular

intervals, and the indicator light flashes in red, your headset needs to be recharged.

Important:

· If your headset is fully charged, the red indicator light will not turn on when plugging

into the charger.

(To check whether your headset is fully charged, press the talk button for approx.

2 seconds, once released, the red indicator light will turn on for approx. 3 seconds.)

· To maximize battery lifetime, it is recommended to recharge your headset to full capacity

only when the battery is low, since a battery has a lifetime of about 500 charging cycles.

· If you leave your headset battery empty for an extended period of time, it could

excessively discharge the battery. In this case, charge your headset for 3 hours or more

until the battery recovers and recharges completely.When you first charge the headset

after prolonged storage, it may take few minutes for the red indicator light to turn on.

· Do not charge your headset for more than 10 hours.

· The use of any other charger will automatically suspend the warranty. It is strictly

forbidden and can be very dangerous.

BLUETREK SENSE I 2

English

Pairing the BLUETREK® SENSE

Before using the BLUETREK® SENSE headset, you must pair it with your Bluetooth® mobile

phone. Pairing is the process of linking 2 Bluetooth® devices, so that they can communicate.

To initiate pairing:

Place the BLUETREK® SENSE and your mobile phone within 0.3 meter (1 foot) from each

other.

3 I BLUETREK SENSE

English

Switch on your phone and select its

Bluetooth® discover mode (refer to

the Bluetooth® mobile phone user manual).

When the BLUETREK® SENSE is switched

off, press and hold the Main button for

about 7 seconds until the indicator light

flashes red and blue alternately. And a

sound can be heard in the speaker.

If pairing was successful, the indicator light will switch to blue and flashes slowly.

If you haven’t started the discovery mode within 5 minutes, the headset will go to the

standby mode. You must then switch off your headset and start the pairing again.

English

For some phones, you may need

to select “Connect”.

BLUETREK SENSE I 4

BLUETREK SENSE

Connect

Assign short name

Set as unauthorised

Delete

Select Cancel

BLUETREK SENSE

“0000”

BLUETREK SENSE

4Once the mobile phone detects the headset, a “BLUETREK SENSE”message

will be displayed. Follow the phone instructions to accept the pairing.The PIN

code (or passkey) is 0000, then press “yes” or“ok”.

Wearing the BLUETREK® SENSE

5 I BLUETREK SENSE

English

Two different sizes of metal ear hooks are included in the pack to suit your ear size.

To attach the ear hook, simply insert the ear hook ring to the back of the headset

as shown in the diagrams.

For left ear wearing, the ear hook should be inserted as shown in the diagrams.

Switching the BLUETREK® SENSE ON and OFF

Switching BLUETREK® SENSE ON

When your headset is off, press and hold the Main button for about 3 seconds until the

blue indicator light is on. A beep (2 tones) can be heard in the speaker. Release the

Main button.

Switching BLUETREK® SENSE OFF

When your headset is on, press and hold the Main button for about 7 seconds until the red

indicator light is on. A beep (2 tones) can be heard in the speaker then release the TALK

button.

Making a call

Mobile phone with voice recognition

. Make sure the voice recognition function on your mobile is activated and your voice tags

have been recorded with the phone.To enter these, please refer to your phone’s manual.

.When there is no incoming or active call, press once on the TALK button

.Wait for the audio signal sent by the mobile phone (generally a short tone).

. Speak the name of person you wish to call.

English

BLUETREK SENSE I 6

Answering a call

When the headset rings, press once on the TALK button to take the call.

Ending a call

Press once on the TALK button to end an active call.

Adjusting the volume

Adjust the volume from your mobile phone during an active call.

7 I BLUETREK SENSE

English

Muting the microphone

Mute the microphone from your mobile phone during an active call.

Mobile without voice recognition

. Make sure both the headset and the mobile phone are ON and in stand-by mode.

. Dial the number on the phone keypad, after approximately 2 seconds the audio

connection will be established.

This function may not be available on some phones, please refer to the trouble shooting

frequent asked questions in our website: www.bluetrek.com. to find out more.

Transferring a call from BLUETREK® SENSE to the mobile phone

During an active call, double click on the TALK button.

This function only works in the Hands-Free Profile.

In the Headset profile, you can simply turn off your headset.

Transferring a call from the mobile phone to the BLUETREK® SENSE

During an active call on the mobile phone, double click on the TALK button to transfer the call.

This function may not be available depending on your phone.

English

BLUETREK SENSE I 8

Call waiting

When you hear a call waiting alert while you are on a call, press approx. 2 seconds

on the TALK button to accept the second call and place the current call on hold.

To switch between an active call and a hold call, press approx. 2 seconds on the

TALK button.

To end the active call and take the hold call, press once on the TALK button.

This function may not be available, depending on your phone. However, you can always

answer the second call from your phone keypad.

Other manuals for Sense

Table of contents

Other BlueTrek Headset manuals

Popular Headset manuals by other brands

Sena

Sena SMH10 quick start guide

IASUS

IASUS Stealth IA-NT4-BASIC-BT manual

Sennheiser

Sennheiser EPOS ADAPT 230 user guide

Doro

Doro Flexus HS2005 user guide

GE 98971 datasheet

Hama

Hama 00184070 quick start guide

Plantronics

Plantronics Blackwire 3200 Series user guide

Blue Tiger

Blue Tiger Advantage PLUS user manual

Jawbone

Jawbone Icon user manual

Jabra

Jabra FR 20 user guide

Roxcore

Roxcore Flow A+ manual

Turtle Beach

Turtle Beach XP 510 user guide

Philips

Philips SHB6101 Specification sheet

Jabra

Jabra PRO 9460 Duo datasheet

HyperX

HyperX HyperX Cloud Flight manual

Bose

Bose MIE2 Mobile owner's guide

Jabra

Jabra Steel quick start guide

HyperX

HyperX cloud ii quick start guide