Blomberg LWF184620G User manual

Washing Machine

User Manual

LWF184620G

2820531177_EN/ 12-05-23.(17:39)

Document Number :

Please read these instructions first before using your appliance

Dear Customer,

Thank you for choosing a Blomberg appliance.

Please take some time to read this user manual before using your appliance, to ensure you know how to

safely operate the controls and functions.

Carefully follow all unpacking and installation instructions to ensure the appliance is correctly connected

and fitted prior to use.

Please write your product model and serial number on the last page of this user manual, and store in a safe

location close to the appliance for easy future reference.

This user manual may also be applicable for several other models. Differences between models will be

listed.

If you have any questions or concerns, please call our contact centre or find help and information online at

www.beko.co.uk

Explanation of symbols used throughout this User Manual

C• Important information or

useful hints about usage.

A• Warning for hazardous

situations with regard

to life and property.

B• Warning for electric shock.

• Recyclable materials.

Do not dispose of the packaging materials together with domestic or other wastes. Take them to the

packaging material collection points designated by the local authorities.

3 / EN Washing Machine / User Manual

1 General safety instructions

This section contains safety instructions that will help protect from risk of

personal injury or property damage. Failure to follow these instructions shall

void any warranty.

1.1 Life and property safety

uNever place the product on a carpet-covered floor. Otherwise, lack of airflow

beneath the machine will cause electrical parts to overheat. This will cause

problems with your product.

uUnplug the product if it is not in use.

Always have the installation and repairing procedures carried out by the

Authorised Service Agent. The manufacturer shall not be held liable for

damages that may arise from procedures carried out by unauthorised persons.

uThe water supply and draining hoses must be securely fastened and remain

undamaged. Otherwise, there is the risk of water leakage.

While there is still water inside the product, never open the loading door or

remove the filter. Otherwise, risk of flooding and injury from hot water will occur.

uDo not force open the locked loading door. The door will open immediately

after the washing cycle has ended. If the door does not open, apply the

solutions provided for "Loading door cannot be opened." error in the

Troubleshooting section. In case of forcing the loading door to open, the

door and the lock mechanism may get damaged.

uUse detergents, softeners and supplements suitable for automatic washing

machines only.

Follow the instructions on the label of textile products and the detergent package.

The water supply pressure required to run the product is between 1 to 10 bars

(0.1 – 1 MPa).

Do not use old or used water inlet hoses on the new product. It may cause stains

on your laundry.

1.2 Children's safety

This product can be used by children at and above 8 years old and by persons

whose physical, sensory or mental capabilities were not fully developed or

who lack experience and knowledge provided that they are supervised or

trained on the safe usage of the product and the risks it brings out. Children

should not play with the product. Cleaning and maintenance works should not

be performed by children unless they are supervised by someone. Children

under the age of 3 should be kept away unless continuously supervised.

4 / EN Washing Machine / User Manual

uPackaging materials are dangerous for the children. Keep packaging

materials in a safe place away from reach of the children.

uElectrical products are dangerous for the children. Keep children away from

the product when it is in use. Do not allow them to play with the product.

Use child lock to prevent children from intervening with the product.

uDo not forget to close the loading door when leaving the room where the

product is located.

uStore all detergents and additives in a safe place away from the reach of

the children by closing the cover of the detergent container or sealing the

detergent package.

1.3 Electrical safety

uIf the product has a failure, it should not be operated unless it is repaired by

the Authorised Service Agent! There is the risk of electric shock!

uThis product is designed to resume operating in the event of powering

on after a power interruption. If you wish to cancel the programme, see

"Cancelling the programme" section.

uPlug the product into a grounded outlet protected by a 13 A fuse. Do not

neglect to have the grounding installation made by a qualified electrician.

Our company shall not be liable for any damages that will arise when the

product is used without grounding in accordance with the local regulations.

uDo not wash the product by spraying or pouring water onto it! There is the

risk of electric shock!

uNever touch the power cable plug with wet hands! Never unplug by pulling

on the cable. Always press on the plug with one hand and pull out the plug

by grabbing with the other hand.

uProduct should be unplugged during installation, maintenance, cleaning

and repair procedures.

If the power cable is damaged, it must be replaced by the manufacturer,

authorised service

or a similarly qualified person (preferably an electrician)

or someone designated by the importer in order

to avoid possible risks.

1.4 Hot surface safety

The glass of the loading door gets too hot while

washing at higher temperatures. Therefore,

especially do not allow children touch the

loading door glass while washing.

5 / EN Washing Machine / User Manual

2Important instructions for environment

2.1 Compliance with WEEE Directive

This product complies with EU WEEE Directive (2012/19/EU). This product bears a

classification symbol for waste electrical and electronic equipment (WEEE).

This product has been manufactured with high quality parts and materials which can be

reused and are suitable for recycling. Do not dispose of the waste product with normal

domestic and other wastes at the end of its service life. Take it to the collection center for the

recycling of electrical and electronic equipment. Please consult your local authorities to learn

about these collection centers.

Compliance with RoHS Directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful

and prohibited materials specified in the Directive.

2.2 Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our

National Environment Regulations. Do not dispose of the packaging materials together with the domestic or

other wastes. Take them to the packaging material collection points designated by the local authorities.

Intended use

• This product has been designed for domestic use. It is not for commercial purposes or it should not be used

out of its intended use.

• The product must only be used for washing and rinsing of laundry that are marked accordingly.

• The manufacturer waives any responsibility arisen from incorrect usage or transportation.

• The service life of your product is 10 years. During this period, original spare parts will be available to

operate the appliance properly.

• This appliance is intended to be used in household and similar applications such as:

– staff kitchen areas in shops, offices and other working environments;

– farm houses;

– by clients in hotels, motels and other residential type environments;

– bed and breakfast type environments;

– areas for communal use in blocks of flats or in launderettes.

6 / EN Washing Machine / User Manual

4Technical specifications

SUPPLIER’S NAME MODEL IDENTIFIER

(*)

The model information as stored in the product database can be reached by

entering following website and searching for your model identifier (*) found

on energy label.

https://eprel.ec.europa.eu/

Supplier name or trademark BLOMBERG

Model name LWF184620G

7159541800

Rated capacity (kg) 8

Maximum spin speed (rpm) 1400

Built-in No

Height (cm) 84

Width (cm) 60

Depth (cm) 59

Single Water inlet / Double Water inlet • / -

• Available

Electrical input (V/Hz) 230 V / 50Hz

Total current (A) 10

Total power (W) 2200

Main model code 1311

AWARNING: Consumption values are applicable for cases where the wireless network connection is off.

Rinse Spin+Drain

Prewash Fast Fast+ Extra

Rinse

Extra

Water

Anti

Crease

Pet Hair

Removal

Rinse

Hold

Water

Drain

Soaking

Spin No

Spin

Tap

Water

(Cold)

Steam

Time

Delay

Night

Modu

Temperature Door

Lock

Child

Lock

On/Off Start /

Pause

Soil Level Add

Garment

AutoDose Liquid

Detergent

Selection

Softener

Selection

Wash

Downloaded

Program

Steeping

(End)

Cancel AntiCrease+ Iron

Dry

Cupboard

Dry

Extra

Dry

Timed

Drying

Clean&

Wear

Symbols Table

Drying

7 / EN Washing Machine / User Manual

4.1 Installation

Your washing machine automatically detects the amount of laundry placed inside when selecting a program.

While installing the product, before the first use, calibration should be done to ensure that the laundry amount is detected in the

most accurate way.

To do this, select the Drum Cleaning* program and cancel the spin function. Start the program without laundry. Wait for the

program to finish, which will take about 15 minutes.

*The program name may vary depending on the model. For the appropriate program selection, review the program descriptions section.

• Preparation of the location and electrical, tap water and waste water installations at the place of installation

is the customer's responsibility.

• Make sure that the water inlet and discharge hoses as well as the power cable are not folded, pinched or

crushed while pushing the product into its place after installation or cleaning procedures.

• The manufacturer shall not be held liable for damages that may arise from procedures carried out by

unauthorised persons.

• Prior to installation, visually check if the product has any defects on it. If so, do not have it installed.

Damaged products cause risks for your safety.

4.1.1 Appropriate installation location

• Place the product on a hard and level floor. Do not put it onto a carpet with high pile or other similar

surfaces.

• If the washing machine and dryer are placed on top of each other, their total weight –when loaded–

amounts to 180 kilograms. Place the products on a solid and flat floor that has sufficient load carrying

capacity!

• Do not place the product on the power cable.

• Do not install the product in environments where the temperature falls below 0 ºC.

• Leaving a gap at the sides of the machine is suggested to reduce vibration and noise

• On a raised floor, do not place the product next to the edge or on a platform.

• Do not place heat sources such as Hobs, Irons, Ovens, etc. on the washing machine and do not use them

on the product.

4.1.2 Removing packaging reinforcement

Tilt the machine backwards to remove the packaging reinforcement.

Remove the packaging reinforcement that is attached to the ribbon. Do

not attempt this operation alone, get help.

4.1.3 Removing the transportation locks

1 Loose all bolts with an appropriate wrench until they turn freely.

2 Remove the transport safety bolts by rocking them slightly.

3 Insert the plastic covers from the bag containing the user manual into the openings on the rear panel.

8 / EN Washing Machine / User Manual

ACAUTION: Remove the transportation safety bolts before operating the washing machine! Otherwise, the product will be

damaged.

Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be moved again in the future.

Install the transport safety bolts in the reverse order of the disassembly procedure.

Never move the product without the transportation safety bolts properly fixed in place!

4.1.4 Connecting the water supply

CIt is necessary to have 10 – 80 litres of water flowing from the fully open tap in one minute to have your machine run

smoothly. Attach a pressure reducing valve if the water pressure is higher.

ACAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a case the laundry will

get damaged or the product will switch to protection mode and will not operate.

ACAUTION: Your drain house will be flooded if the hose comes out of its housing during water discharge. Moreover, there

is risk of scalding due to high washing temperatures! In order to prevent such situations and make sure that the machine

performs water intake and discharge processes without any problem, fix the drain hose securely.

• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100 cm.

• In case the drain hose is elevated after laying it on the floor level or close to the ground (less than 40 cm

above the ground), water discharge becomes more difficult and the laundry may come out excessively wet.

Therefore, follow the heights described in the figure.

40 cm

100 cm

• To prevent the waste water siphoning back into the machine again and to ensure easy drainage, do not

immerse the end of the hose into the waste water or do not insert it into the drain for more than 15 cm. If it

is too long, cut it short.

• The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched

between the drain and the machine.

• If the length of the hose is too short, add an original extension hose. Length of the hose may not be longer

than 3.2 m. To avoid water leak failures, the connection between the extension hose and the drain hose of

the product must be fitted well with an appropriate clamp as not to come off and/or leak.

4.1.6 Adjusting the feet

ACAUTION: In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced

on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing

and vibration problems.

CAUTION:

Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

9 / EN Washing Machine / User Manual

1 Loosen the lock nuts on the feet by hand.

2 Adjust the feet until the product stands in a stable and balanced way.

3. Tighten all lock nuts by hand again.

4.1.7 Electrical connection

Connect the product to a grounded outlet protected by a 13 A fuse. Our company shall not be liable for any

damages that will arise when the product is used without grounding in accordance with the local regulations.

• Connection must comply with national regulations.

• The wiring for the electrical outlet circuit must be sufficient to meet the appliance requirements. Use of a

Groud Fault Circuit Interrupter (GFCI) is recommended.

• Power cable plug must be within easy reach after installation.

• If the current value of the fuse or breaker in the house is less than 13 Amps, have a qualified electrician

install a 13 Amp fuse.

• The voltage specified in the “Technical specifications” section must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

BWARNING: Damaged power cables must be replaced by Authorised Service Agents.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the

rating label corresponds to your electricity supply.

We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket

in a readily accessible position.

Should the mains lead of the appliance become damaged or need replacing at any time, it must be replaced

by a special purpose made mains lead which can only be obtained from an Authorised Service Agent.

BWARNING: This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate

plug fitted.

Destroy the old plug, a cut off plug with a bare cord could cause a shock hazard if inserted into a socket

elsewhere in the house.

The moulded plug on this appliance incorporates a 13A fuse. Should the fuse need to be replaced an ASTA

approved BS1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of

losing the fuse cover, the plug must not be used until a replacement fuse cover has been fitted. Colour of the

replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are

available from any good electrical store.

10 / EN Washing Machine / User Manual

Important

Fitting a different plug

As the colours of the wires in the mains lead of this appliance may not

correspond with the coloured markings identifying the terminals on your

plug, proceed as follows:

1 Connect the green - yellow or green (earth) wire to the terminal in

the plug marked ‘E’ or with the symbol or coloured green and

yellow or green.

2 Connect the blue (neutral) wire to the terminal in the plug marked

‘N’ or coloured black.

3 Connect the brown (live) wire to the terminal in the plug marked ‘L’

or coloured red.

With the alternative plugs a 13A fuse must be fitted either in the plug or

adaptor or in the main fuse box. If in doubt contact a qualified electrician.

Transportation of the product

1. Unplug the product before transporting it.

2. Remove water drain and water supply connections.

3. Drain all water that has remained in the product.

4. Install transportation safety bolts in the reverse order of removal procedure.

CNever move the product without the transportation safety bolts properly fixed in place!

AWARNING: Packaging materials are dangerous to children. Keep packaging materials in a safe place away from reach

of the children.

4.1.8 Initial use

Before starting to use the product make sure that the preparations are

made which are in line with the “Important Safety and Environment

Instructions” and the instructions in the “Installation” section.

To prepare the product for washing laundry, first perform a Drum

Cleaning programme. If this is not available in your machine, apply the

method which is described in the section 4.4.2.

CUse an anti-limescale suitable for the washing machines.

Some water might have remained in the product due to the quality control processes in production. It is not harmful for the

product.

Table of contents

Other Blomberg Washer manuals

Blomberg

Blomberg WNF 7446 A User manual

Blomberg

Blomberg WM 98400 SX Instruction Manual

Blomberg

Blomberg WM72200W Technical Document

Blomberg

Blomberg WMI 7462 W20 User manual

Blomberg

Blomberg WNF 6180 WEN User manual

Blomberg

Blomberg WNF 6441 AE20 User manual

Blomberg

Blomberg WMT 7310 S User manual

Blomberg

Blomberg WM 67121 NBL00 User manual

Blomberg

Blomberg WNF 5380 WE User manual

Blomberg

Blomberg WNF 6421 WE20 User manual

Blomberg

Blomberg LBF1623W User manual

Blomberg

Blomberg LWF28441 User manual

Blomberg

Blomberg LWF194410W User manual

Blomberg

Blomberg LWF194520QW User manual

Blomberg

Blomberg WAF 7200 User manual

Blomberg

Blomberg WM 87120 NBL00 User manual

Blomberg

Blomberg WNF 5441 AE User manual

Blomberg

Blomberg WNF 8447 S30 User manual

Blomberg

Blomberg WM 26110 NBL00 User manual

Blomberg

Blomberg WNF 6241 WE20 User manual

Blomberg

Blomberg WNF 5441 AE20 User manual

Blomberg

Blomberg LWF184420G User manual

Blomberg

Blomberg WAF 4080 User manual

Blomberg

Blomberg LBF0502W User manual

Popular Washer manuals by other brands

Tricity Bendix

Tricity Bendix AW 1000 W Operating & installation instructions

Panasonic

Panasonic NA-F60L5WRB operating instructions

GE WSLP1500 Dimensions and installation information

Electrolux

Electrolux EWF1284EDW Service manual

Bosch

Bosch WAN2829BSN User manual and installation instructions

LG TV2516DV3B owner's manual

LG TH2517DSAV owner's manual

VESTEL

VESTEL CMH-XL 7510 TE user manual

AEG

AEG 74335 User information

Johnson

Johnson JWF721A user manual

Beko

Beko WTE7604XLW0 owner's manual

Danby

Danby DTT100A1WDB Owner's use and care guide

Amica

Amica WA 14 Ex operating instructions

Daewoo

Daewoo DWD-F1222 instruction manual

Bosch

Bosch WAS28461AU instruction manual

Miele

Miele PW 6080 Vario manual

Finlux

Finlux FLX108CF220 user manual

Whirlpool

Whirlpool 3LBR5132AN0 Use and care guide