Black Box LES301A-KIT User manual
LES301A quick start guide
BL A C K B OX®
Quick Start Guide
Access a serial RS-232 or RS-422/485 device over a 10- or 100-Mbps
network.
1-Port 10/100 Device Server RS-232/422/485 DB9 M
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information
LES301A
LES301A-KIT
LES301AE-KIT
724-746-5500 | blackbox.com
Page 2 LES301A quick start guide
This quick-start guide provides brief descriptions of the LES301A to help you get started. For detailed information, refer to the
user’s manual on the product CD.
QS.1. What’s Included
Your package should contain the following items. If anything is missing or damaged, contact Black Box Tech Support
at 724-746-5500 or info@blackbox.com.
LES301A-KIT and LES301AE-KIT:
• (1) Ethernet Serial Server
• (1) CD-ROM containing configuration utility and a user manual in PDF format
• (2) wallmounting screws
• (1) power adapter (PS012 for LES301A-KIT); (PS012E for LES301AE-KIT)
• (1) 3-pin Phoenix connector
• This printed quick-start guide
LES301A:
• (1) Ethernet Serial Server
• (1) CD-ROM containing configuration utility and a user manual in PDF format
• This printed quick-start guide
QS.2 Optional Accessories
• DIN Rail Kit (LES30X-DR)
• DB9 to TB5 Adapter (LES30X-TB5)
QS.3 Hardware Setup
Interfaces
NOTES:
1. The RS-232/422/485 interface does not support isolation.
2. Press the LES301A’s reset button to reset the settings to the default values.
Figure QS-1 shows the interface.
1-Port 10/100 Device Server RS-232/422/485 DB9 M Quick Start Guide
724-746-5500 | blackbox.com
Page 3
LES301A quick start guide
1-Port 10/100 Device Server RS-232/422/485 DB9 M Quick Start Guide
DB9 male serial port
DC 9–30 V
Reset
button
RJ-45
10-/100-Mbps
port
DIN rail screw hole
Wallmount screw hole
Figure QS-1. LES301A interface.
Indicators
Table QS-1 describes the indicators on the LES301A.
Table QS-1. LED indicators.
LAN LED Message Description
Off Ethernet disconnected
Blinking green Data is transmitted on Ethernet at 100 Mbps
Blinking orange Data is transmitted on Ethernet at 10 Mbps
COM Port LED Message Description
Off No data is transmitted on COM port
Blinking Data is transmitted on COM port
RUN LED Message Description
On Jumper JP1 Pin 1 and Pin 2 are shorted to disable AP firmware running
Blinking (rate: 0.5 sec.) AP firmware is running normally
724-746-5500 | blackbox.com
Page 4 LES301A quick start guide
1-Port 10/100 Device Server RS-232/422/485 DB9 M Quick Start Guide
Installation Steps (LES301A-KIT and LES301AE-KIT)
1. Connect an LES301A to the included power supply (PS012 or PS012E) or to a 9–30 VDC source.
2. Connect an LES301A to your Ethernet network. Use a standard straight-through Ethernet cable to connect it to a hub/switch.
Use a crossover cable to connect it to a PC’s Ethernet port.
NOTE: If you connect the PC to the LES301A, make sure that the PC is in the same subnetwork as the LES301A.
3. Connect the LES301A‘s serial port to a serial device.
NOTE: You may need an adapter (LES30X-TB5) for RS-485 or RS-422 applications.
4. You can mount the LES301A to a wallplate (mounting screws are included) or a DIN rail using the DIN rail kit (LES30X-DR).
QS.4 Software Setup
Table QS-2. Software default settings.
Default Network Setting Default User Name/Password
IP: 10.0.50.100 User name: admin
Gateway: 10.0.0.254 Password: null (leave it blank)
Subnet: 255.255.0.0 —
Auto IP (Dynamic IP):
A DHCP server can automatically assign the IP address and network settings. The LES301A supports the DHCP function. By
default, the DHCP function on the LES301A is disabled; you can use SerialManager.exe to enable this function (see Figure QS-2).
Figure QS-2. SerialManager.exe utility Dialog Window.
Assign a Static IP address by: Using Telnet, SerialManager.exe utility, or Web browser
Using Telnet
1. Telnet to the LES301A using the DOS command “Telnet IP_address.” Example: telnet 10.0.50.100
2. The LES301A’s network, link mode, and COM ports settings can be configured in the telnet window.
724-746-5500 | blackbox.com
Page 5
LES301A quick start guide
1-Port 10/100 Device Server RS-232/422/485 DB9 M Quick Start Guide
Using SerialManager.exe Utility
Use SerialManager.exe (included on the product CD) to automatically search for all LES301A units connected to your local area
network. Then select the desired LES301A to configure the network setting individually.
Using Web Browser
1. Make sure your PC is located on the same network subnet as LES301A.
2. Open a Web browser, then type in the IP address of the LES301A to be configured. The default user name is “admin” and the
default password is null (leave it blank).
3. The LES301A’s network, link mode, and COM ports settings can be configured in different Web pages.
4. Click on “Save Configuration” to save settings.
5. Click on the ”Restart” button to make the change effective if necessary.
QS.5 Pin Assignments
The pin assignments of the DB9 connector on LES301A are shown in the following table:
Table QS-3. DB9 connector pin assignments.
Pin
Number RS-232 Full-Duplex
2-Wire RS-485
Half-Duplex
RS-422/4-Wire RS-485
Full Duplex
1DCD N/A N/A
2RXD N/A (reserved) TXD+
3TXD DATA+ RXD+
4DTR N/A N/A
5SG (Signal Ground) SG (Signal Ground) SG (Signal Ground)
6DSR N/A N/A
7 RTS DATA- RXD-
8CTS N/A (reserved) TXD-
9N/A N/A N/A
NOTE: Use an LES30X-TB5 adapter for RS-485 to RS-422 applications.
724-746-5500 | blackbox.com
Page 6 LES301A quick start guide
1-Port 10/100 Device Server RS-232/422/485 DB9 M Quick Start Guide
The LES30X-TB5 terminal block pin assignments are shown in Table QS-4.
Table QS-4. Terminal block pin assignments.
Pin
Number
RS-422/4-Wire
RS-485
Full Duplex
2-Wire RS-485
Half-Duplex
1T+ Not connected
2T- Not connected
3R+ Data+
4R- Data-
5SG (Signal Ground) SG (Signal Ground)
9N/A N/A
724-746-5500 | blackbox.com
Page 7
LES301A quick start guide
NOTES
724-746-5500 | blackbox.com
BLACK BOX®
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 30 seconds away at 724-746-5500 or blackbox.com.
LES301A Quick Start Guide, version 1
About Black Box
Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks
and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support
available in 30 seconds or less.
© Copyright 2011. Black Box Corporation. All rights reserved. Black Box®and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
Other manuals for LES301A-KIT
1
This manual suits for next models
2
Other Black Box Server manuals
Black Box
Black Box 16-Port Rackmount 10/100 User manual
Black Box
Black Box Elite II Series User manual
Black Box
Black Box LES1208A-R2 User manual
Black Box
Black Box LES290A User manual
Black Box
Black Box LES431A User manual
Black Box
Black Box les1208A User manual
Black Box
Black Box leS1116a User manual
Black Box
Black Box LES302A User manual
Black Box
Black Box LES2702A-WL User manual
Black Box
Black Box LES1508A User manual
Black Box
Black Box LS4103A User manual
Black Box
Black Box LES2700A-16-R2 User manual
Black Box
Black Box LES1108A User manual
Black Box
Black Box LES2700A-SSS User manual
Black Box
Black Box LES1108A User manual
Black Box
Black Box LWS401A User manual
Black Box
Black Box Industrial Ethernet Serial Server LES401A... User manual
Black Box
Black Box ServShield RM470A-R2 User manual
Black Box
Black Box Usb Peripheral Server/5 User manual
Black Box
Black Box LS50116-R3 User manual
