Black Box leS1116a User manual
BL A C K B O X®
Securely manage data center and network
equipment from anywhere in the world.
16-/32-/48-Port Value-Line Console Servers QS Guide
Customer
Support
Information
LES1116A
LES1132A
LES1148A
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax
724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence,
PA 15055-1018 • Web site: www.blackbox.com • E-mail: [email protected]
Page 2 724-746-5500 | blackbox.com
16-, 32-, and 48-Port Value-Line Console Servers Quick Start Guide
TRADEMARKS USED IN THIS MANUAL
Black Box and the Double Diamond logo are registered trademarks of
BB Technologies, Inc.
Nagios is a registered trademark of Nagios Enterprises, LLC.
Any other trademarks mentioned in this manual are acknowledged to be
the property of the trademark owners.
Page 3
724-746-5500 | blackbox.com
16-, 32-, and 48-Port Value-Line Console Servers Quick Start Guide
QS1. Introduction
This Quick Start Guide walks you through installation, configuration, and local
operation or your LES1116A, LES1132A, and LES1148A 16-/32-/48-Port Value-Line
Console Servers. For more details, please refer to the user’s manual on the CD-ROM.
QS2. What’s Included
Your package should contain the following items. if anything is missing or damaged,
contact Black Box at 724-746-5500.
•16-, 32-, or 48-Port Value-Line Console Server
• (2) UTP cables
• (1) DB9F-RJ45S straight cable
• (1) DB9F-RJ45S crossover cable
• (1) Power cable
• Printed Quick Start Guide
• User’s manual and SDT connector tool software on CD-ROM
QS3. Connect the Hardware
1. Plug the Value-Line Console Server into the AC power.
2. Connect the LAN port on the console server to your network. Connect your serial
devices to the SERIAL PORTS 1-8/16/48.
NOTE: If you plan to use out-of-band (OoB) dial-in access, connect an external
modem LOCAL port and connect the modem to the phone line.
QS4. Set Up the Value-Line Console Server
The default console server IP Address is 192.168.0.1 (subnet mask 255.255.255.0).
Using a Web browser on any computer that is LAN connected to the Console Server:
1. Enter https://192.168.0.1 into the address bar.
2. Log in using the default system user name root and the default password. A
Welcome screen listing the basic configuration steps is displayed.
3. Select “System: Administration,” enter and confirm a new System Password and
click “Apply.”
Page 4 724-746-5500 | blackbox.com
16-, 32-, and 48-Port Value-Line Console Servers Quick Start Guide
NOTE: The computer connected to the LAN must have an IP address in the same
network range (192.168.0.xxx) as the Value-Line Console Server. Alternately,
you can use the ARP ping command to set the IP address (refer to the user’s
manual). The embedded DHCP client is enabled by default, so it will
automatically accept any network IP address assigned by any DHCP server on
your network—and will then respond at both 192.168.0.1 and its DHCP
address.
Figure QS-1. System Administration screen.
4. To assign your Console Server a static IP address or to permanently enable DHCP,
select “System: IP” and check “DHCP or Static“ for Configuration Method.
QS5. Configure Serial and Network Devices
1. Select “Serial & Network: Serial Port” to display the labels, modes, and protocol
options currently set for each serial port—by default all serial ports are set in
Console Server mode (refer the user’s manual if other modes are required).
2. To configure a serial port, click “Edit.” Configure the Common Settings (Baud
Rate, Parity, Data Bits, Stop Bits, and Flow Control) to match those of the device
being controlled.
Figure QS-2. Serial and Network: Serial Port.
Page 5
724-746-5500 | blackbox.com
16-, 32-, and 48-Port Value-Line Console Servers Quick Start Guide
3. Select the console server protocols (Telnet, SSH, TCP, and RFC2217) that are to be
used for the data connection to that port.
4. You may also set a Logging Level to specify the level of information to be logged
and monitored for that port. Click “Apply.”
5. To access locally networked computers (referred to as Hosts) through the console
servers, select “Serial & Network: Network Hosts” and click “Add Host.”
Figure QS-3. Serial and Network: Network Hosts screen
6. Enter the IP address/DNS Name of the host.
7. Edit the Permitted Services used for accessing this host, for example, HTTPS (TCP
Port 443), VNC (TCP Port 5990), or add custom TCP or UDP port numbers. Only
the services specified here are tunneled to the host, all other services are blocked.
8. At this stage, you may also specify the level of information to be logged and
monitored for each host access.
9. Click “Apply.”
QS6. Add New Users
NOTE: We recommend that you set up a new Administrator user (in the admin
group with full access privileges) and log in as this new user for all ongoing
administration functions (instead of continuing as root).
Page 6 724-746-5500 | blackbox.com
16-, 32-, and 48-Port Value-Line Console Servers Quick Start Guide
Figure QS-4. Serial and Network: Users and Groups screen.
1. For each new user, select “Serial & Network: Users & Groups” and click “Add
User.”
2. Enter a Username and enter and confirm a Password, and name the Accessible
Hosts and Accessible Ports the user is allowed to access.
3. Click “Apply.”
NOTE: The Console Server comes with a default certificate for initial configuration
only. When you first browse to the Console Server, you will receive a message
that the certificate is “untrusted.” Initially, you'll need to direct your browser
to (temporarily) proceed and accept this untrusted certificate.
We recommend that you generate and install a new trusted certificate as soon
as possible thereafter. To produce the unique CSR and later upload the newly
issued certificate, select “System: SSL Certificates.”
QS7. Advanced Configurations
The Value-Line Console Server offers many more advanced functions including:
• The Alerts & Logging: Alerts facility that monitors serial ports, hosts, user logins,
UPSs and PDUs. You can specify a broad selection of trigger events (such as data
patterns, temperature, or battery levels). When triggered, a warning e-mail, SMS,
Nagios®, or SNMP alert is sent to a nominated destination.
Page 7
724-746-5500 | blackbox.com
16-, 32-, and 48-Port Value-Line Console Servers Quick Start Guide
• Extensive management of third-party UPSs and PDUs using open source NUT and
Powerman tools. The Manage: Power facility enables both administrators and
regular users to monitor and control attached PDU power strips, and servers with
embedded IPMI BMCs.
• Historical logs of all communications with serial and network attached devices,
system activity, UPS and PDU power status, environmental status, etc. The level of
logging is set as ports and devices are configured. Alerts & Logging: Port Log
enables this history to be saved locally or remotely. Logs can be viewed from the
Status and Manage menus.
• Other advanced features, such as Dashboard, Serial Port Cascading, remote
Authentication, Trusted Networks, Secure Tunneling, Nagios Distributed
Monitoring, and the Command Line interface are covered in detail in the User’s
Manual on the CD-ROM.
NOTE: On the CD-ROM, you will also find the SDT Connector software tool. Once
you have configured the console server, this tool provides you with secure,
point-and-click access to it and all its attached managed devices. Refer to the
provided SDT Connector Quick Start Guide for details on setting up remote
management of the console server and connected devices.
BL A C K B OX®
Black Box Tech Support: FREE! Live. 24/7.
Tech support the
way it should be.
Great tech support is just 30 seconds away at
724-746-5500 or blackbox.com.
724-746-5500 | blackbox.com
About Black Box
Black Box Network Services is your source for an extensive range of networking
and infrastructure products. You’ll find everything from cabinets and racks and
power and surge protection products to media converters and Ethernet switches
all supported by free, live 24/7 Tech support available in 30 seconds or less.
©Copyright 2011. All rights reserved.
LES1116A Quick Start Guide, version 2
This manual suits for next models
2
Table of contents
Other Black Box Server manuals
Black Box
Black Box iCOMPEL ICC LG WEBOS 3 User manual
Black Box
Black Box LES1108A User manual
Black Box
Black Box LES1108A User manual
Black Box
Black Box 37687 Instruction Manual
Black Box
Black Box LRA502A-ET-R5 User manual
Black Box
Black Box LES1108A User manual
Black Box
Black Box LES2700A-SSS User manual
Black Box
Black Box LWS401A User manual
Black Box
Black Box CDUNM10 User manual
Black Box
Black Box LES301A-KIT User manual
Black Box
Black Box LRA2900A User manual
Black Box
Black Box LES1208A-R2 User manual
Black Box
Black Box LES1202A User manual
Black Box
Black Box LEU9070 User manual
Black Box
Black Box LS4103A User manual
Black Box
Black Box RM5000A-R3 User manual
Black Box
Black Box LES2700A-16-R2 User manual
Black Box
Black Box LES302A User manual
Black Box
Black Box Industrial Ethernet Serial Server LES401A... User manual
Black Box
Black Box ServTray KVT201A-JP-R3 User manual
