BIXOLON SRP-350plusIII SRP-352plusIII User manual

User's Manual

Network Interface

Rev. 1.00 SRP-350plusIII

SRP-352plusIII

http://www.bixolon.com

Rev. 1.00

- 2 -

Network Interface

■Table of Contents

1. Manual Information........................................................................................................3

2. Precautions ....................................................................................................................3

3. Specifications ................................................................................................................4

4. How to Connect..............................................................................................................5

4-1 Initial WLAN Connection (Windows 2000)..................................................................8

4-2 Initial WLAN Connection (Windows XP) .....................................................................8

4-3 Initial WLAN Connection (Windows VISTA, Windows 7, Windows 8).......................13

5. Configuration ...............................................................................................................19

5-1 WLAN Setting: FTP ..................................................................................................21

5-2 WLAN Setting: Telnet...............................................................................................23

6. Ethernet/WLAN Test by using Windows Test Page..................................................24

7. Factory Reset...............................................................................................................30

7-1 Initializing LAN Settings............................................................................................30

7-2 Initializing WLAN Settings.........................................................................................31

8. Troubleshooting...........................................................................................................33

Rev. 1.00

- 3 -

Network Interface

1. Manual Information

This Network manual provides information on the connection of network with the printer.

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. In following, product specifications and/or user manual content

may be changed without prior notice.

2. Precautions

2-1 The printer has to be within 100m (Outdoor) from AP (Access point) to connect

WLAN.Although 35m is able to communicate in door, WLAN could be affected by

environment to be shorten.

2-2 The maximum separating distance may be shortened if transmission obstacles, such

as cement walls, are present

2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same

frequency is present, transmission may be interrupted. Separate the printer and

Bluetooth-enabled device from such interrupting devices by a distance of at least 5m.

Rev. 1.00

- 4 -

Network Interface

3. Specifications

CATEGORIES

FEATURE

IMPLEMENTATION

WLAN

Specification

Standard

IEEE802.11b, IEEE802.11g, IEEE802.11n

Frequency

Range

2.412~2.484GHz

Channels

1 ~ 14 channels

Range

Up to 100m free space (Outdoor)

Connection

Modes

Infrastructure and Ad-hoc (IBSS), Wi-Fi Direct

Security

Open Connection

Shared Key(WEP encryption 64 and 128 bit options)

WPA-PSK, WPA2-PSK

WPA1/2 Enterprise

(EAP-TLS, EAP-TTLS, PEAP, LEAP, FAST)

SSL2 / SSL3 / TLS1

Protocol

DHCP Client, HTTP, HTTPS, TELNET, FTP, ARP,

ICMP, SNMP, IPv4, TCP, UDP

LAN

Specification

Interface

10/100 Base-T All in one (Auto detection)

Protocol

DHCP Client, HTTP, ARP, ICMP, IPv4 ,TCP, UDP

Rev. 1.00

- 5 -

Network Interface

4. How to Connect

(1) Connecting WLAN Printer

Connect to the AP (Access Point) configured in Infrastructure mode in order to connect to

the wireless network

Infrastructure mode

In order to configure the network between wireless terminals, connect to the terminal in

Ad-hoc / Wi-Fi Direct Mode.

Ad-hoc / Wi-Fi Direct mode

A P

Rev. 1.00

- 6 -

Network Interface

(2) Checking Network Setting

1) LAN

Function key

a. Turn on the printer.

b. Wait 10 or more seconds until the LAN interface boots up.

c. Push the function key.

d. The settings will be printed only one time since the printer is turned on.

2) WLAN

a. Turn on the printer and wait for about 10 seconds until WLAN interface boots up.

The Error/Paper LED will stop blinking when booting is complete.

b. When booting process is complete, open the printer cover and press the FEED button

for five seconds. The internal buzzer will sound five times and printer will be in WLAN

selection mode. Mount the paper properly, close the cover, and check that the

following information is printed.

Function key

Power

FEED

Rev. 1.00

- 7 -

Network Interface

c. When the above message is printed, you can print and check the WLAN information

as shown below by selecting Mode 1. (Mode 1 can be selected by one short-press of

the Feed button followed by one long-press.)

WLAN F/W VERSION : 0.1

SYSTEM NAME : SRP-350plusIII

NETWORK MODE : ADHOC

ENCRYTION : NONE

ESSID : PRINTER_adhoc

DHCP : ENABLED

IPADDRESS : 192.168.1.1

SUBNET MASK : 255.255.255.0

GATEWAY : 192.168.1.2

PORT : 9100

HTTPS : DISABLED

TELNET : DISABLED

FTP : DISABLED

SNMP : DISABLED

WLAN MACADDRESS

C C 7 A 0 0 0 0 1 0 8 7 7

WLAN Mode Selection

Modes

0: Exit

1: WLAN Information Print

2: WLAN Factory Reset

and Reboot Printer.

3 or more: None

Select Modes by Feed button control

as below.

Step 1. Short-press as many times as

The mode number to choose.

Step 2. Long-press over 1 second.

*e.g. To choose Mode 2, press Feed

Button 3 times(short-short-long)

Rev. 1.00

- 8 -

Network Interface

4-1 Initial WLAN Connection (Windows 2000)

Windows 2000 does not support wireless network setting.

When you use Windows 2000, you need to set the utility option as below after installing

utility program related to the wireless LAN driver that you use.

- Network mode: Ad-hoc

- SSID: PRINTER_adhoc

- IP address: 192.168.1.2

- Subnet Mask: 255.255.255.0

- Authentication (Encryption): Open (None)

4-2 Initial WLAN Connection (Windows XP)

When wireless utility program is installed, you have to set the wireless control values

via the program, otherwise you have to terminate the program in order to do proper

setting after following the steps 'Control Panel>>Administrative tools>>

Services>>Wireless Zero Configuration>>Start'.

1) Right click on the icon, and select Properties.

2) Select and right click on the Wireless Network Connection, and then select Properties.

Rev. 1.00

- 9 -

Network Interface

3) Select Internet Protocol (TCP/IP), and then click Properties.

4) Set the IP settings as shown below, and then click OK.

Rev. 1.00

- 10 -

Network Interface

5) Select the Wireless LAN tab, and then select “Use Windows to configure my wireless

network settings.”

Click the [Advanced] button.

6) Select “Computer-to-computer (ad hoc) network only.”

Other manuals for SRP-350plusIII SRP-352plusIII

This manual suits for next models

Table of contents

Other BIXOLON Printer manuals

BIXOLON

BIXOLON SRP-350III User manual

BIXOLON

BIXOLON SPP-R410 User manual

BIXOLON

BIXOLON SRP-352plusIII Release note

BIXOLON

BIXOLON SRP-500 Assembly instructions

BIXOLON

BIXOLON SRP-Q200 User manual

BIXOLON

BIXOLON Srp-275III Mounting instructions

BIXOLON

BIXOLON SRP-350 PlusA User manual

BIXOLON

BIXOLON Bixolon SRP-270 User manual

BIXOLON

BIXOLON STP-131 User manual

BIXOLON

BIXOLON SRP-370 - Two-color Direct Thermal Printer User manual

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Installation instructions

BIXOLON

BIXOLON XM7-30 Instruction manual

BIXOLON

BIXOLON SRP-QE302 Instruction manual

BIXOLON

BIXOLON SRP-350plusIIA User manual

BIXOLON

BIXOLON SRP-350 PlusA User manual

BIXOLON

BIXOLON SPP-R300 User manual

BIXOLON

BIXOLON XM7-40 User manual

BIXOLON

BIXOLON SLP-DX420 User manual

BIXOLON

BIXOLON SRP-Q300 User manual

BIXOLON

BIXOLON SRP-S3000 User manual

BIXOLON

BIXOLON SRP-350 PlusA User manual

BIXOLON

BIXOLON SPP-R300 User manual

BIXOLON

BIXOLON SRP332III Installation instructions

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide