BIXOLON SPP-R200III Instruction manual

Bluetooth Connection Manual

SPP-R200III

Mobile Printer

Rev. 1.00

http://www.bixolon.com

Rev. 1.00

- 2 -

SPP-R200III

■Table of Contents

1. Manual Information......................................................................................................3

2. Precautions ..................................................................................................................3

3. iOS MFi mode change .................................................................................................3

3-1 Set-up by printer button ............................................................................................3

3-2 iOS mode check .......................................................................................................3

4. Bluetooth Connection Instructions............................................................................4

4-1 iOS mode enable......................................................................................................4

4-2 Android mode(iOS mode disable).............................................................................6

5. Troubleshooting...........................................................................................................8

Rev. 1.00

- 3 -

SPP-R200III

1. Manual Information

This Bluetooth Connection Manual provides information on the connection of Bluetooth-

enabled iOS devices with the printer (SPP-R200III).

We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and

quality of all our products. In following, product specifications and/or user manual content

may be changed without prior notice.

2. Precautions

2-1 To connect the printer with another device via Bluetooth, the devices must be within

10m of one another. The connection is broken if the distance between devices

exceeds 10m.

2-2 The maximum separating distance may be shortened if transmission obstacles, such

as cement walls, are present.

2-3 If a device (such as a microwave oven, wireless LAN, etc.) that uses the same frequen

cy is present, transmission may be interrupted. Separate the printer and Bluetooth-

enabled device from such interrupting devices by a distance of at least 5m.

3. iOS MFi mode change

You can switch over to MFi mode which allows you to have Bluetooth connection with iOS

devices. (Note: Make sure that MFi mode must be on.)

3-1 Set-up by printer button

- Turn on the printer power.

- Push the power button and feed button for 2 seconds while paper cover is opened.

- After beep sound, close the cover.

- Reboot the printer after checking below message.

iOS mode enable!!

Please Reboot Printer!!

- Repeat above procedure to make MFi mode disable.

3-2 iOS mode check

- Implement Self Test

- If firmware version is Vxx.xx STOBa, iOS mode will be disable.

- If firmware version is Vxx.xx STOBi, iOS mode will be enable.

Rev. 1.00

- 4 -

SPP-R200III

4. Bluetooth Connection Instructions

4-1 iOS mode enable

1) Select the icon. 2) Select “Bluetooth”.

3) Select the printer to connect. 4) Enter PIN. (default : 0000)

Rev. 1.00

- 5 -

SPP-R200III

5) Select “Pair”. 6) Bluetooth communication is available.

Rev. 1.00

- 6 -

SPP-R200III

4-2 Android mode(iOS mode disable)

1) Select the icon. 2) Select “Bluetooth”.

3) Select the printer to connect. 4) Enter PIN. (default : 0000)

Rev. 1.00

- 7 -

SPP-R200III

5) Select “OK”. 6) Bluetooth communication is available.

4-2-1 NFC Auto pairing

Referring to 4-2 Android mode, paring process will be simplified by means of using NFC Auto paring

function. (Only, the device should support NFC Read/Write function.)

1) Tap your host device to NFC tag 2) Enter PIN. (default : 0000)

on a printer. (Following process is the same as 5), 6) in 4-2)

Rev. 1.00

- 8 -

SPP-R200III

5. Troubleshooting

5-1 Please follow the guide below if Bluetooth is not searched on iOS device.

1) Perform self test to check the printer is set as iOS mode.

2) Check whether printer is connected to other iOS device. Printer is not able to be

found on your iOS device if it is connected to other iOS device. If STATUS LED

blinks when you press Feed button, it means that printer is connected to other iOS

device.

You need to disconnect the connection to other iOS device, or turn on the printer

again while the paper cover is opened.

* Printer is automatically connected to last iOS device which was connected in iOS

mode. But it does not make a connection to any device, if user turns it on while the

paper cover of it is opened.

5-2 Refer to this, if you see the pop-up message as below.

1) “Failed to connect to SPP-R200III”.

2) The “Failed to connect”message might appear on a screen, since NFCAuto pairing

merely supports Bluetooth paring and does not allow device to device

communication. However, it operates properly.

Other manuals for SPP-R200III

Table of contents

Other BIXOLON Printer manuals

BIXOLON

BIXOLON SPR-350III Installation and operating manual

BIXOLON

BIXOLON STP-103II User manual

BIXOLON

BIXOLON SRP-350II User manual

BIXOLON

BIXOLON SRP-S3000 User manual

BIXOLON

BIXOLON STP-103 Installation instructions

BIXOLON

BIXOLON SRP-350IIOBE User manual

BIXOLON

BIXOLON STP-103 User manual

BIXOLON

BIXOLON XD5-40d Series User manual

BIXOLON

BIXOLON SRP-350III User manual

BIXOLON

BIXOLON STP-103 User manual

BIXOLON

BIXOLON STP-103II User manual

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII Installation instructions

BIXOLON

BIXOLON SRP-275 User manual

BIXOLON

BIXOLON SRP-350II Installation and operation manual

BIXOLON

BIXOLON SLP-DX420B User manual

BIXOLON

BIXOLON SRP-350plusIII SRP-352plusIII User manual

BIXOLON

BIXOLON SPP-R220 User manual

BIXOLON

BIXOLON SRP-500 User manual

BIXOLON

BIXOLON SRP-350II Installation and operation manual

BIXOLON

BIXOLON SRP-350II User manual

BIXOLON

BIXOLON STP-103 User manual

BIXOLON

BIXOLON SRP-S200 User manual

BIXOLON

BIXOLON SRP-350III Installation instructions

BIXOLON

BIXOLON SLP-DV22 User manual

Popular Printer manuals by other brands

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series quick start guide

Evolis

Evolis Elypso user guide

Kyocera

Kyocera FS-9530DN specification

Canon

Canon LASER SHOT LBP-1210 Specifications

Samsung

Samsung BIXOLON SRP-350plusF user manual

Canon

Canon PIXMA PRO-1 Series Getting started

Canon

Canon PIXMA G3560 Online manual

Dell

Dell Color Laser Printer 2130cn user guide

Tektronix

Tektronix Phaser 840 user guide

Epson

Epson ET-7750 Programming guide

Canon

Canon CLBR 460ps Service manual

Eltron

Eltron P210 Guide manual

Ricoh

Ricoh MD-P1 Service manual

Epson

Epson SC-F7100 series user guide

Epson

Epson Stylus C40UX Service manual

Canon

Canon imagePASS-A2 Service guide

Canon

Canon S820D user guide