Billion BiPAC 5200 User manual
BiPAC 5200 Series
(802.11g) ADSL2+ Modem/Router
Quick Start Guide
Billion BiPAC 5200 Series ADSL2+ Modem/Router
For more detailed instructions on configuring and using
the (802.11g) ADSL2+ Modem/Router, please refer to the
on-line manual.
Package Contents
BiPAC 5200 series ADSL2+ Modem/Router
CD-ROM containing the on-line manual
RJ-11 ADSL/telephone Cable
Ethernet (CAT-5 LAN) Cable
AC-DC power adapter (12VDC, 1A) for BiPAC 5200 / 5200G
AC-AC power adapter (12VAC, 1A) for BiPAC 5200S
This Quick Start Guide
Warning
Do not use the BiPAC 5200 Series in high humidity or high
temperatures.
Do not use the same power source for the BiPAC 5200 Series as
other equipment.
Do not open or repair the case yourself. If the BiPAC 5200
Series is too hot, turn off the power immediately and have it
repaired at a qualified service center.
Avoid using this product and all accessories outdoors.
A
ttention
Place the BiPAC 5200 Series on a stable surface.
Only use the power adapter that comes with the package. Using
a different voltage rating power adaptor may damage the router.
1
Quick Start Guide
The Front LEDs
BiPAC 5200
BiPAC 5200S
BiPAC 5200G
LED Meaning
1 PPP : Lit steady when there is a PPPoA / PPPoE connection.
2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”).
3 LAN Port: Lit when connected to an Ethernet device.
Green for 100Mbps; Orange for 10Mbps.
Blinking when data is Transmitted / Received.
4 WLAN :
(5200G
only)
Lit green when the wireless connection is established.
Flashes when sending/receiving data.
5 SYS : Lit when the system is ready.
6 PWR : Lit when power is ON.
2
Billion BiPAC 5200 Series ADSL2+ Modem/Router
The Rear Ports
BiPAC 5200
3
2 4 5
3
BiPAC 5200S
5432
BiPAC 5200G
5 4
2
1
3
Port Meaning
1 Power Switch Power ON/OFF switch
2 PWR Connect the supplied power adapter to this jack.
3 RESET
After the device is powered on, press it to reset the device or
restore to factory default settings.
0-3 seconds: reset the device
6 seconds above: restore to factory default settings (this is used
when you can not login to the router, e.g. forgot the password)
4 LAN
(RJ-45
connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the four
LAN ports when connecting to a PC or an office/home network of
10Mbps or 100Mbps.
5 ADSL(LINE) Connect the supplied RJ-11 (“telephone”) cable to this port when
connecting to the ADSL/telephone network.
Quick Start Guide
Connecting BiPAC 5200
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
4
Billion BiPAC 5200 Series ADSL2+ Modem/Router
Connecting BiPAC 5200S
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR and SYS LEDs are lit steadily and that the relevant LAN LED is lit.
5
Quick Start Guide
Connecting BiPAC 5200G
1. Connect the Router to a LAN (Local Area Network) and the ADSL/telephone (LINE) network.
2. Power on the device.
3. Make sure the PWR, SYS, and WLAN LEDs are lit steadily and that the relevant LAN LED is
lit.
6
Billion BiPAC 5200 Series ADSL2+ Modem/Router
Configuring PC in Windows XP
1. Go to Start / Control Panel (in Classic
View). In the Control Panel, double-click on
Network Connections
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window, click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
7
Quick Start Guide
Configuring PC in Windows 2000
1. Go to Start / Settings / Control Panel. In the Control
Panel, double-click on Network and Dial-up
Connections.
2. Double-click Local Area Connection.
3. In the Local Area Connection Status
window click Properties.
4. Select Internet Protocol (TCP/IP) and click
Properties.
5. Select the Obtain an IP address
automatically and the Obtain DNS server
address automatically radio buttons.
6. Click OK to finish the configuration.
8
Other manuals for BiPAC 5200
2
This manual suits for next models
2
Table of contents
Other Billion Network Router manuals
Billion
Billion BiPAC 5200 User manual
Billion
Billion BiPAC 7300M User manual
Billion
Billion BiPAC 6300NXL User manual
Billion
Billion BiPAC 7560G User manual
Billion
Billion BiPAC 710C2 User manual
Billion
Billion BIPAC 7100G User manual
Billion
Billion BiPAC 5200N RC User manual
Billion
Billion BiPAC 8700AX-1600 User manual
Billion
Billion BiPAC 7300G RA User manual
Billion
Billion BiPAC 8501 R3 User manual
Billion
Billion BiPAC 7202 User manual
Billion
Billion BiPAC 7100SG User manual
Billion
Billion BiPAC 7300 User manual
Billion
Billion BiPAC 5200S Series User manual
Billion
Billion BiPAC 7402(G)X(L) Series User manual
Billion
Billion BiPAC 7401V(G)PX User manual
Billion
Billion BiPAC 6300VNOZ User manual
Billion
Billion BiPAC 2070 (P) User manual
Billion
Billion BiPAC 5200 User manual
Billion
Billion BiPAC 8500 User manual
